home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!darwin.sura.net!spool.mu.edu!tulane!ukma!news
- From: WALLY@UKCC.UKY.EDU
- Subject: Re: Power supply for hard drive.
- References: <168C11352C.WALLY@UKCC.UKY.EDU>
- <92355.165925LEEK@QUCDN.QueensU.CA>
- Nntp-Posting-Host: ukcc.uky.edu
- Message-ID: <168C49F6D.WALLY@UKCC.UKY.EDU>
- Organization: University of Keentookey
- Sender: news@ms.uky.edu (USENET News System)
- Date: Mon, 21 Dec 1992 16:20:08 GMT
- Lines: 29
-
- [All stuff deleted because I'm typing this manually with a plain VT100
- emulator on a CMS system.. Eeeeek..]
-
-
- Okay... I missed the original poster to my question, but luckily was
- quoted and I think I got the idea. The drive was measured taking about
- 1a once before. I put a new power supply on it yesterday, and something
- is STILL wrong.. The drive does the same *plink plink* stuff it does
- when it's overjuiced.. The +12 is 12.03 and the +5 is around 5.12, but
- when I put a load on it it drops to 5.03..
-
- The +5 side has 4.8 (!) amps, and the +12 has 1.1. What could be the
- problem here?
-
-
- I swear.. Me and power supplies *don't* make a good combination.. :(
-
- Thanks for your help so far.. :)
- ___________________________________________________________________
- / /|
- /__________________________________________________________________/ |
- | _ | |
- | Walter_ // Wally@UKCC.UKY.EDU AN723@Cleveland.Freenet.EDU | |
- | R \X/ Wally@MIK.UKY.EDU /| | |
- | Francis Francis@UKPR.UKY.EDU /| / | /| | |
- |____________________________________________/ | _/ | _/ |______|/
- | / |/
- | /
- |/
-