home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!dtix!darwin.sura.net!Sirius.dfn.de!solaris.rz.tu-clausthal.de!news!maasjost
- From: maasjost@irb.uni-hannover.de (Lars Oliver Maasjost)
- Newsgroups: comp.os.linux
- Subject: Re: SLS: Problems with HD
- Message-ID: <maasjost.722158852@irb.uni-hannover.de>
- Date: 19 Nov 92 07:40:52 GMT
- References: <maasjost.721564312@irb.uni-hannover.de>
- Sender: news@newsserver.rrzn.uni-hannover.de (News Service)
- Organization: IRB Uni-Hannover, Germany
- Lines: 51
-
- maasjost@irb.uni-hannover.de (Lars Oliver Maasjost) writes:
-
- >________________________________________________________________________
- >Hey Linuxer !
-
- >I have a great problem with the SLS and my HD (90MB, AT-Bus).
-
- >Every time i install the SLS an reboot my maschine after the
- >installation, and i make a fsck, i become the following message:
-
- > HD: read_intr: status = 0xd0 . :^{{{
-
- >When i try fsck -r /dev/hda2, i get messages like this:
-
- > Block has been used befor...
- > Zone XYZ not in use, no file uses it.
- > Zone XYZ: marked in use, no file uses it.
-
-
- >What is wrong whit my HD? Or with the SLS (Version 0.98,pl1-36)
-
- >I use the following Systemconfiguration:
-
- > AT-386, 33 MHz, 64 kB-Cache
- > 4 MB Memory
- > 1,44 Floppy a:
- > 1,2 MB Floppy b:
- > 90 MB HD, AT-Bus
- > 30 MB DOS (c: - /dev/hda1)
- > 55 MB Linux (/dev/hda2)
- > 10 MB swap (/dev/hda3)
-
- >Thanks to all for a hopeful tip
- >
- >Lars
-
- Why i get no answer to my question ?
-
- Dos nowbudy alls have this problem !!
-
- I waiting for some usefull answer.
-
- Lars
-
- ________________________________________________________________________________
- maasjost@irb.uni-hannover.de Tel.: 0511/762-4939
- Dipl.-Ing. Lars Maasjost Fax.: 0511/762-4933
- SysAdm
-
- Uni-Hannover Institut fuer Rechnerstrukturen und Betriebssysteme
- ________________________________________________________________________________
-