home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!uunet.ca!xenitec!zswamp!geoff
- From: geoff@zswamp.UUCP (Geoffrey Welsh)
- Newsgroups: comp.dcom.modems
- Subject: Re: Docs needed for CTD Datacom plus 2424ADH
- Message-ID: <BP0cuB2w165w@zswamp.UUCP>
- Date: Mon, 16 Nov 92 23:44:46 EST
- References: <yWu+qAhBBh107h@freeside.com>
- Organization: Izot's Swamp
- Lines: 25
-
- elrond@freeside.com (SysAdmin) writes:
-
- > Subject line says it all realy, I recently got a used
- > CTS Datacom plus 2424ADH modem, and have no docs for it.
- >
- > I've seen this modem used in "reliable mode", but I have no
- > Idea what the command set for the MNP modes are. I've tried
- > using the Hayes Enchanced AT command set, to no avail. I
- > would appreciate any help I could get on this.
-
- Umm, I believe that there was an ADH and an ADM model, the latter with
- MNP3.
-
- Also, these modems (at least, the ones I saw - I worked for a former
- distributor) don't support higher serial port rates, so you can't get the
- performance boost from MNP.
-
- I suppose that, in a day when MNP was rare, these were good modems (though
- they keep dying because of overheating - few seem to have lasted this long)...
- but, in a day of MNP5 and/or V.42bis and 9600 bps port speeds on 2400MNP
- modems, they're not much better than a plain 2400.
-
- Geoffrey Welsh, 7 Strath Humber Court, Islington, Ontario, M9A 4C8 Canada
- geoff@zswamp.uucp, [xenitec.on.ca|m2xenix.psg.com]!zswamp!geoff (416)258-8467
- You're still young if your wallet is exhausted before you are.
-