#4,269# "Disable Screensaver and Monitor Energy Settings"
#4,263# "Show Curtain"
#4,270# "Force Truecolor"
#4,271# "TV-Chip Options"
#4,240# "Macrovision off"
#4,241# "Enhance Text"
#4,242# "Dot Crawl Reduction"
#4,244# "No Colorbars"
#4,243# "Color Fix"
#4,245# "Non-Interlaced"
#4,246# "Negative H-Sync"
#4,264# "Signal adjustment"
#4,258# "Color Carrier"
#4,257# "Adaptive Flicker Filter"
#4,273# "Hue"
#4,274# "Clone Mode Overlay"
#4,280# "Prefer TV mode on"
#4,277# "Head 1"
#4,278# "Head 2"
#4,281# "Direct overlay to"
#4,277# "Head 1"
#4,278# "Head 2"
#4,266# "Special output modes"
#4,265# "Wide screen signal"
#4,267# "RGB"
#4,268# "YUV"
--- items on 3. tab -------------------
#20,4# "Resize Modus off - ( To turn on: "
#5,348# "Aspect Ratio:"
#5,332# "Show Client Data"
#5,347# "Options"
#5,312# "Show Border"
#5,313# "Hide Taskbar"
#5,314# "Use Toolbar"
#5,342# "Enlarge Borders"
#5,343# "Top:"
#5,344# "Sides:"
#5,345# "Bottom:"
#5,346# "Presets (press 3 sec. to save)"
--- items on 4. tab -------------------
#6,420# "Sound Options"
#6,421# "Mixer 1:"
#6,427# "Mixer 2:"
#6,419# "Dynamic Volume"
#6,426# "Ignore mute in TV mode"
#6,418# "Other Line:"
#6,410# "Work Mode Preset"
#6,409# "Entertainment Mode Preset"
#6,4010# "Playback Device"
#6,4011# "Playback Device"
#6,470# "S/PDIF"
#6,471# "S/PDIF"
#6,472# "Dynamic"
#6,473# "Dynamic"
#6,4020# "Master"
#6,4021# "Wave"
#6,4022# "Line"
#6,4023# "other"
#6,4024# "Master"
#6,4025# "Wave"
#6,4026# "Line"
#6,4027# "other"
--- items on 5. tab -------------------
#7,470# "Power off Timer"
#7,471# "min."
#7,458# "Always start Timer with TV mode"
#20,0# "Start"
#20,1# "Stop"
#7,472# "Autostart"
#7,464# "Start when TV mode is enabled"
#7,465# "Start when TV mode is disabled"
#7,463# "Quit TV mode when 1. app. is quit"
#7,453# "MS-DOS Application"
#7,473# "Parameter"
#7,474# "Parameter"
#7,424# "Desktop Icon Position"
#7,411# "Save"
#7,412# "Restore"
#7,413# "Auto Save/Restore"
#7,425# "Ref. Resolution:"
--- items on 6. tab -------------------
#8,540# "Hardware Detection"
#8,536# "Card:"
#8,550# "TV-Chip:"
#8,551# "Dualhead:"
#8,552# "Driver:"
#8,554# "ID:"
#8,541# "Hotkey Configuration"
#8,542# "TV Mode on:"
#8,543# "TV Mode off:"
#8,544# "Show TVTool:"
#8,545# "Start App.:"
#8,546# "Monitor Stby:"
#8,547# "Resize Mode:"
#8,548# "Zoom Window:"
#8,549# "Toggle Size:"
#8,530# "Decrease:"
#8,531# "Increase:"
#8,532# "Function:"
#8,539# "2. Button:"
#8,538# "(Press together with hotkey)"
--- items on more options config ------
#9,561# "Language"
#9,559# "Backup Settings"
#9,564# "Backup"
#9,565# "Restore"
#9,558# "Start Options"
#9,551# "Minimize TVTool on startup"
#9,552# "Load TVTool on Windows startup"
#9,553# "Multi row style"
#9,566# "Quit on Cancel + ESC"
#9,567# "Always expand More Options"
#9,576# "Show up on right mouse button (2 sec.)"
#9,575# "Show all messages"
--- items on 7. tab -------------------
#10,610# "Registration"
#10,611# "Please press the button next to key field for registration. After 2-3 seconds the fields grey out if succesful."
#10,613# "Registration is disabled in Demo version!"
--- items on 8. tab (nView) -----------
#11,1# "Work mode"
#11,2# "Entertainment mode"
#11,57# "Monitor #"
#11,58# "Monitor #"
#11,60# "Primary Device"
#11,61# "Secondary Device"
#11,62# "Primary Device"
#11,63# "Secondary Device"
#11,3# "Enable"
#11,4# "Enable"
#11,10# "Analog monitor"
#11,11# "Digital monitor"
#11,12# "TV"
#11,20# "Analog monitor"
#11,21# "Digital monitor"
#11,22# "TV"
#11,13# "Analog monitor"
#11,14# "Digital monitor"
#11,15# "TV"
#11,23# "Analog monitor"
#11,24# "Digital monitor"
#11,25# "TV"
#11,30# "Clone"
#11,31# "Extension"
#11,32# "Clone"
#11,33# "Extension"
#11,34# "Rotate 180░"
#11,35# "Rotate 180░"
#11,53# "Test setting"
#11,52# "Scan Devices"
#20,12# "Quick Setup >>"
#20,13# "Quick Setup <<"
#20,14# "Please wait ..."
--- items on 9. tab (Player) -----------
#13,40# "Context menu configuration"
#13,50# "Enable TVTool context menu"
#13,70# "Player for AVI files"
#13,71# "Player for MPEG files"
#13,51# "Enable TV mode when player is started"
#13,52# "Disable TV mode when player is quit"
#13,41# "Player presets"
#13,72# "Player Selection:"
#13,73# "Command Line:"
#13,57# "Delay"
#13,74# "Sec."
#13,66# "Restore Defaults"
#20,5# "TVTool - Play on TV"
--- items on 10. tab (IRControl)--------
#14,40# "IR configuration "
#14,41# "Scanning"
#14,42# "Received code:"
#14,43# "Name"
#14,44# "Learn"
#14,46# "Code"
#14,47# "Command"
#14,230# "What┤s this?"
#14,1115# "Don┤t show again"
#14,1105# "More info"
#14,1110# "Order"
--- items on more options IRControl) ---
#15,1004# "IR configuration file"
#15,1000# "Save"
#15,1001# "Load"
#15,1005# "IR signal bandwith"
#15,220# "Narrow bandwith"
#15,1006# "Skip infrared commands"
#15,1007# "Eliminate toggle bit"
#15,232# "Find toggle bits"
#15,1008# "Bit mask:"
#15,1009# "Clear:"
--- items on Quick setup page ---------
#12,100# "nView options"
#12,23# "Secondary device position"
#12,552# "Work mode"
#12,553# "ET mode"
#12,65# "Force TV detection"
#12,550# "Apply"
#12,66# "Allow rotation"
#12,68# "Enable toolbar fix"
#12,67# "Enable secondary device positioning"
#12,69# "Keep monitor resolution"
#12,27# "Quick setup entertainment mode"
#12,20# "Single TV mode"
#12,21# "Clone mode"
#12,22# "Desktop Extension mode"
#12,1# "The TV is the only display device. This mode is especially recommended for games."
#12,2# "The TV and the monitor show the same content simultaneously."
#12,3# "The movie is displayed on TV while the monitor can be used to work."
#12,4# "Select"
#12,5# "Select"
#12,6# "Select"
--- TVTool messages -------------------
#21,3# "All adjustments are set to default values!"
#21,6# "Do you really want to change the TV system?"
#21,7# "Your Monitor must be able to handle low frequencies (PAL 50Hz/31kHz - NTSC 60Hz/31kHz) to use dualview. Otherwise it could be damaged.",13,13,"Do you want to turn this option on?"
#21,15# "This mode is not initialized yet.\\Do you want to initialize it now and restart the computer?"
#21,21# "No window is selected!\\To select a window bring it in foreground first and press the hotkey."
#21,25# "Do you really want to change the TV mode resolution?"
#21,29# "There was no supported graphics card found in your system!\\TVTool supports graphics cards based on nVidia chipsets only."
#21,31# "TVTool was unable to detect a TV chip on your card, therefore most functions are disabled. Please have a look in the FAQ to solve this problem!\\(Note: The internal TV encoders NV17/18 are not yet supported by TVTool.)"
#21,32# "TVTool was unable to detect a TV chip on your card!\\You have more than one graphics adapters in your system. Please make sure that the card containing the TV-out is the primary graphics card. This can be selected in the bios of your PC."
#21,34# "TVTool was unable to start the NT service. You must have administrator rights for the first installation of TVTool!"
#21,37# "The shareware version of TVTool has a time limit of 15 minutes each session. Thank you for evaluating this program.\\Please check out www.tvtool.com for further information."
#21,48# "The combination ALT-F6 is not available under this operating system. Please chose another hotkey!"
#21,49# "There seems to be a problem with your user data. Please contact userdata@tvtool.de.\\The fastest way to get help is to use the 'Request support' button!"
#21,50# "TVTool has detected a graphics card change since last session.\\Picture parameters are set to their default values!"
#21,51# "This is the first time you run this version of TVTool.\\The hotkey definitions and picture parameters are set to default."
#21,52# "The PC will be shut down in 1 minute. All open applications are concluded.\\To stop the timer please press the Cancel button."
#21,54# "The switch could not be performed.\\Please try another TV mode resolution."
#21,55# "The change will become active after next start of TVTool!"
#21,59# "Please select application"
#21,60# "Please select the player you want to use"
#21,61# "The PC will be shut down shortly!\To stop press Cancel button."
#21,62# "The playback starts shortly.\To stop press Cancel button"
#21,63# "The settings have been saved to your TVTool folder!"
#21,64# "The settings are restored!\\TVTool will be quit now and the settings become active after next start."
#21,65# "The backup file was not found in your TVTool folder!"
#21,67# "Please wait while searching hardware..."
#21,68# "This mode requires special wiring.\\Do you want to turn it on?"
#21,70# "The registry entries could not be restored. Please try again after reboot."
#21,71# "The current resolution is smaller than the reference resolution. Therefore some icons might be placed incorrectly!\\Do you really want to restore the icons?"
#21,72# "Do you really want to save the icon positions and overwrite current setting?"
#21,76# "TVTool is minimized into a trayicon in the taskbar now. To make it visible again just click on the trayicon.\\A right click on the trayicon opens a menu with more options."
#21,78# "The player presets 1-3 will be restored to Mediaplayer2, ZoomPlayer and BSPlayer.\\Do you really want to do that?"
#21,80# "Some items like the tab names will change language after next start of TVTool only."
#21,81# "Don┤t show this message again."
#21,82# "Some right mouse button operations might not work properly when this option is turned on. If you experience problems in any application turn it off again please."
#21,83# "The command line can consist of several commands which are interpreted by the media player. As a placeholder for the filename of the movie file please use the symbol %.\\Some players like BSPlayer require the movie filename in quotation marks. In this case it had to look like ''%''"
#21,84# "TVTool was unable to initialize this resolution.\\Probably the graphic card driver is too old. Please upgrade to Detonator driver version 43.45 or later!"
#21,85# "Required functions of the graphics card driver were not found on this system! Please upgrade to nVidia Detonator version 43.45 or later.\\TVTool will report an error message each time when the missing function is called."
#21,86# "Do you want to keep this setting?"
#21,87# "Most properties on this tab are disabled for MV TV encoder.\\Please use the MV properties button on the first tab to adjust the MV encoder!"
#21,88# "This action cannot be performed, because a required function was not found in the graphics driver on this system!\\Please update to Detonator 43.45 or later!"
#21,89# "If the Windows session is quit while TV mode is enabled the PC will startup in TV mode next time!\\Do you really want to quit Windows now?"
#21,90# "This option will get active after next start of Windows only!"
#21,91# "When this option is enabled a new entry 'TVTool - Play on TV' is added to the context menu of movie files. Just do a right click on any AVI or MPEG file and it will be opened automatically on the TV screen in the player defined below."
#21,92# "Please press the SAME button on the remote control 2 times after closing this dialog!"
#21,93# "Please select file to save the infrared configuration"
#21,94# "The file already exists! Do you want to overwrite it?"
#21,95# "Please select the infrared configuration file"
#21,96# "This is no TVTool infrared configuration file!"
