> > A lot of misc. fixes that will make it more likely that
> > randomly selected programs will work
> >
> Wonder if some of them will make PageMaker 4 work (fingers crossed...)
alot of random fixes, plus a few hours of hacking on pagemaker
specifically, and aldus pagemaker v5.0a and v4.2 both seem to work for
the most part.
there are likely to be lots of uncovered bugs... but then again, that
is what we have you testers for :).
sadly, these changes are all very recent, and probably won't make it
into 1.99l.
- Cotton
---
Cotton Seed (cottons@mit.edu, cottons@ardi.com)
..., as if he were some kind of subterranean creature worshiping a
phosphorescent god.
From owner-executor Mon Apr 3 17:35:35 1995
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id RAA14123 for executor-outgoing; Mon, 3 Apr 1995 17:35:35 -0700
Received: from sloth.swcp.com (sloth.swcp.com [198.59.115.25]) by nacm.com (8.6.9/8.6.9) with ESMTP id RAA14118 for <executor@nacm.com>; Mon, 3 Apr 1995 17:35:30 -0700
Received: from iclone.UUCP (uucp@localhost) by sloth.swcp.com (8.6.9/8.6.9) with UUCP id SAA01113; Mon, 3 Apr 1995 18:38:15 -0600
Received: from gwar.ardi.com by mailhost with smtp
>>>>> "Dennis" == Dennis Cheng Kwok-wing <kwcheng2@cs.cuhk.hk> writes:
Dennis> On Mon, 3 Apr 1995, Nik Ahmad Fahmi wrote:
>> But the program runs beautifully on my office's 486DX-2 66 with
>> 8Mb RAM. I'm not using any third party memory manager or
>> anything ... just the plain EMM386 and SMARTDRV with
>> double_buffer (coz I got a SCSI HD).
>>
>> Please help anyone!!!
Dennis> Try pressing F5 (clean boot) in the boot phase (Starting
Dennis> MS-DOS...) if you are using MSDOS6 or later. Of course,
Dennis> load your mouse driver in the
C> prompt.
Dennis> I have tried to use Executor 1.99k in my machine, but it
Dennis> hanged up initially. I am using the plain EMM386 and
Dennis> SMARTDRV too. What I did is the abovementioned and it
Dennis> ran.
We ask that everyone who has problems like this PLEASE INVESTIGATE and
figure out what specific aspect of your startup files is causing
problems. We can't reproduce these problems over here, and we need to
know what's biting you so we can either produce a workaround or
document the problem.
Thanks!
-Mat
From owner-executor Tue Apr 4 21:50:33 1995
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id VAA08361 for executor-outgoing; Tue, 4 Apr 1995 21:50:33 -0700
Received: from news1.crl.com (news1.crl.com [165.113.1.23]) by nacm.com (8.6.9/8.6.9) with SMTP id VAA08353 for <Executor@nacm.com>; Tue, 4 Apr 1995 21:50:28 -0700
Received: from ephsa.UUCP by news1.crl.com with UUCP id AA19788
(5.65c/IDA-1.502); Tue, 4 Apr 1995 21:27:13 -0700
Received: by ephsa.alamo.net (Smail3.1.28.1 #2)
id m0rwMKT-0003pbC; Tue, 4 Apr 95 23:04 CDT
Received: from fcircus.sat.tx.us by fezzik.endicor.com (8.6.12/Endicor)
id WAA10653; Tue, 4 Apr 1995 22:20:21 -0500
Received: by fcircus.sat.tx.us (V1.17-beta/Amiga)
id <5wty@fcircus.sat.tx.us>; Fri, 31 Mar 95 22:23:20 CST
Date: Fri, 31 Mar 95 22:23:20 CST
Message-Id: <9504010423.5wty@fcircus.sat.tx.us>
X-Mailer: BBX-UMB 1.06l (February 20, 1995)
From: Joseph_Pena@fcircus.sat.tx.us (Joseph Pena)
To: warwick@cs.uq.oz.au
Cc: Executor@nacm.com
Subject: Re: de-binhexing
Sender: owner-executor@nacm.com
Precedence: bulk
Another solution to decompressing .Hqx is to simply use Stuffit Expander,
ver. 3.5.2. This program is widely avalible on the Internet. By using
Stuffit Expander, you decompress .Bin, .HQX, and .Sit files. Stuffit
Expander, ver. 3.5.2 will decompress Stuffit 1.5.1 and the new Stuffit
Deluxe ver. 3.5.2 archives. If you need to decompress Unix UUencoded
files, .Zip Pkzip/Pkunzip archives, and .Gzip files, then obtain
DropStuff. Add this program to Stuffit Expander, ver 3.5.2. Please let me
know if you need help.
Sincerely,
Joseph R. Pena
Joseph_Pena@fcircus.sat.tx.us
Joseph_Pena@fcircus.sat.tx.us
From owner-executor Tue Apr 4 22:28:14 1995
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id WAA08778 for executor-outgoing; Tue, 4 Apr 1995 22:28:14 -0700
Received: from news1.crl.com (news1.crl.com [165.113.1.23]) by nacm.com (8.6.9/8.6.9) with SMTP id WAA08773 for <executor@nacm.com>; Tue, 4 Apr 1995 22:28:10 -0700
Received: from ephsa.UUCP by news1.crl.com with UUCP id AA21424
(5.65c/IDA-1.502 for nacm.com!executor); Tue, 4 Apr 1995 22:21:45 -0700
Received: by ephsa.alamo.net (Smail3.1.28.1 #2)
id m0rwNIZ-0003owC; Wed, 5 Apr 95 00:06 CDT
Received: from fcircus.sat.tx.us by fezzik.endicor.com (8.6.12/Endicor)
id WAA10758; Tue, 4 Apr 1995 22:21:17 -0500
Received: by fcircus.sat.tx.us (V1.17-beta/Amiga)
id <5x00@fcircus.sat.tx.us>; Sun, 2 Apr 95 14:35:54 CST
Date: Sun, 2 Apr 95 14:35:54 CST
Message-Id: <9504022035.5x00@fcircus.sat.tx.us>
X-Mailer: BBX-UMB 1.06l (February 20, 1995)
From: Joseph_Pena@fcircus.sat.tx.us (Joseph Pena)
To: executor@nacm.com
Subject: Advertising Executor in Magazines
Sender: owner-executor@nacm.com
Precedence: bulk
Dear Executor,
You should also consider sending a commerical copy of Executor for
DOS and Linux to PC Magazine, PC Computing, PC World, Windows Magazine,
and Windows Sources. I will be glad to write an article on Executor for
you. Please send me some information. Thank you for your time.
Sincerely,
Joseph R. Pena
Joseph_Pena@fcircus.sat.tx.us
From owner-executor Tue Apr 4 22:36:00 1995
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id WAA08921 for executor-outgoing; Tue, 4 Apr 1995 22:36:00 -0700
Received: from news1.crl.com (news1.crl.com [165.113.1.23]) by nacm.com (8.6.9/8.6.9) with SMTP id WAA08916 for <Executor@nacm.com>; Tue, 4 Apr 1995 22:35:56 -0700
Received: from ephsa.UUCP by news1.crl.com with UUCP id AA21422
(5.65c/IDA-1.502); Tue, 4 Apr 1995 22:21:42 -0700
Received: by ephsa.alamo.net (Smail3.1.28.1 #2)
id m0rwNIV-0003pZC; Wed, 5 Apr 95 00:06 CDT
Received: from fcircus.sat.tx.us by fezzik.endicor.com (8.6.12/Endicor)
id WAA10753; Tue, 4 Apr 1995 22:21:14 -0500
Received: by fcircus.sat.tx.us (V1.17-beta/Amiga)
id <5wzv@fcircus.sat.tx.us>; Sun, 2 Apr 95 14:32:28 CST
Date: Sun, 2 Apr 95 14:32:28 CST
Message-Id: <9504022032.5wzv@fcircus.sat.tx.us>
X-Mailer: BBX-UMB 1.06l (February 20, 1995)
From: Joseph_Pena@fcircus.sat.tx.us (Joseph Pena)
To: salernof@polaris.ncs.nova.edu
Cc: Executor@nacm.com
Subject: Re: brief status report
Sender: owner-executor@nacm.com
Precedence: bulk
Not only that SoftWindows and SoftWindows 68K (for 68040 computers) don't
even run Microsoft Windows 3.1 applications that require 386 Enhanced
Mode.
Joseph_Pena@fcircus.sat.tx.us
From owner-executor Tue Apr 4 23:48:53 1995
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id XAA10000 for executor-outgoing; Tue, 4 Apr 1995 23:48:53 -0700
Received: from jaring.my (jaring.my [192.228.128.20]) by nacm.com (8.6.9/8.6.9) with SMTP id XAA09995 for <executor@nacm.com>; Tue, 4 Apr 1995 23:48:46 -0700
Received: from abdulla.UUCP by jaring.my with UUCP id AA18549
(5.67a/IDA-1.5 for executor@nacm.com); Wed, 5 Apr 1995 14:48:41 +0800
Message-Id: <199504050648.AA18549@jaring.my>
Received: from abdulla by abdulla.pc.my (UUPC/extended 1.12k) with UUCP
for executor@nacm.com; Wed, 05 Apr 1995 14:37:40 +0800
From: Nik Ahmad Fahmi <nfahmi@abdulla.pc.my>
To: executor@nacm.com
Date: Wed, 5 Apr 1995 14:37:39
Mime-Version: 1.0
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7BIT
Subject: Re: Executor/DOS 1.99k won't load
Reply-To: nfahmi@abdulla.pc.my
Priority: normal
X-Mailer: PMail v3.0 (R1a)
Sender: owner-executor@nacm.com
Precedence: bulk
> Date sent: Tue, 4 Apr 1995 00:05:31 +0800 (HKT)
> From: Dennis Cheng Kwok-wing <jaring!cs.cuhk.hk!kwcheng2>
> To: Nik Ahmad Fahmi <abdulla!nfahmi>
> Copies to: nacm.com!executor
> Subject: Re: Executor/DOS 1.99k won't load
> On Mon, 3 Apr 1995, Nik Ahmad Fahmi wrote:
>
> > HI all,
> >
> > I just got the demo copy of Executor/DOS 1.99k. My problem is I can't
> > seem to be able to run it on my system ... Pentium-90 with 16Mb RAM.
> Try pressing F5 (clean boot) in the boot phase (Starting MS-DOS...) if
> you are using MSDOS6 or later. Of course, load your mouse driver in the
> C> prompt.
I just managed to pinpoint the problem ... believe it or not, it's my
mouse driver. If I load the standard Microsoft mouse driver, my mouse
won't work but I can load Executor. When I switched to the driver that
comes with the mouse, my mouse works but i was dumped back to DOS
prompt after running Executor.
Running 'mem /c' showed that cwsdpmi and go32 are still in memory and
the PC would just hang after that.
I'm not sure where the mouse driver is from coz it's a no brand mouse
but i believe, it's Logitech compatible .... is there a new version
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id GAA14178 for executor-outgoing; Wed, 5 Apr 1995 06:30:02 -0700
Received: from newsgw.mentorg.com (newsgw.mentorg.com [137.202.128.5]) by nacm.com (8.6.9/8.6.9) with ESMTP id GAA14173 for <Executor@nacm.com>; Wed, 5 Apr 1995 06:29:51 -0700
Received: from Warren.MENTORG.COM by newsgw.mentorg.com (8.6.4/CF5.22R)
id JAA05372; Wed, 5 Apr 1995 09:28:41 -0400
Received: from shokk (shokk.warren.mentorg.com) by Warren.MENTORG.COM with SMTP id AA18946
(5.65c/IDA-1.4.4 for <Executor@nacm.com>); Wed, 5 Apr 1995 09:29:47 -0400
Received: (from majordom@localhost) by nacm.com (8.6.9/8.6.9) id IAA16141 for executor-outgoing; Wed, 5 Apr 1995 08:40:46 -0700
Received: from sloth.swcp.com (sloth.swcp.com [198.59.115.25]) by nacm.com (8.6.9/8.6.9) with ESMTP id IAA16136 for <executor@nacm.com>; Wed, 5 Apr 1995 08:40:39 -0700
Received: from iclone.UUCP (uucp@localhost) by sloth.swcp.com (8.6.9/8.6.9) with UUCP id JAA24146 for nacm.com!executor; Wed, 5 Apr 1995 09:43:31 -0600
Received: from beaut.ardi.com by mailhost with smtp