home *** CD-ROM | disk | FTP | other *** search
-
-
-
- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
- $ $
- $ Lex Luthor $
- $ and $
- $ The Legion Of Doom/Hackers $
- $ Present: $
- $ Hacking Cosmos Part 2 $
- $ Intermediate Course $
- $ $
- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
- $ $
- $ In Part II we will explain how to $
- $ find out various information about $
- $ a Telephone number. Also, files, $
- $ paths and directories will be $
- $ explained. $
- $ $
- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
- $ (C) Written 23-Sept-84 $
- $ L.O.D. Recursive Systems INC. $
- $$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
-
- NOTE: Everything shown in UPPER CASE is printed by COSMOS or typed by you.
-
- I would like to correct a mistake I made in Part 1, I got a little carried
- away with the capabilties of COSMOS. You Cannot enter someones name and get
- thier phone #. What COSMOS is primarily used for is: To assign Central Office
- Equipment to cable pairs, and telephone numbers. It maintains records of all
- relevent facilities including subscriber cable and office equipment, process
- service and work orders, and it produces bulk assignments for office additions
- and rearrangements. In short, it automates the frame in your Central Office.
- It prints lists at the beggining of each day, telling what numbers to connect,
- and disconnect. Also, to keep track of everything going on in the frame.
-
-
- HACKING ACCTS:
- ------- ------
-
- Most COSMOS systems run on either a PDP 11/45 or 11/70 made by DEC, and can
- usually handle up to 96 terminals which are either hard-wired, or remotly dial
- into the system. If you don't know your local COSMOS dial-up or don't have an
- account you can probably bullshit 1 out of your Test Board, frame, or switch.
- They all should have the Dial-up, password and WireCenter in your area. Tell
- them you are Joe Comosolo from the COSMOS data center and youv'e noticed
- illegal access attempts. Ask them who is having the problem and ask them for an
- account/password to do an on-line check to see what the problem is.
-
-
- Typical COSMOS accts are: MF02, PA52, DP08, etc. Those 2 letter prefixes
- in the beggining of the acct stand for:
-
- PA- LooP Assignment center.
- DA- Network Admin center.
- RS- Repair Service.
- MF- Frame and Toll.
- FC- Frame Control center.
- GA- General Inquiries.
- DC- Data Conversion.
- NT- NTec.
- DP- DisPatch.
- CI- CIC.
-
- The more important accounts which are used for service order entry are, in
- order of importance:
-
- ROOT
- SYS
- BIN
- PREOP
- COSMOS
-
- COSMOS is the account that the test board uses, and is now mainly found on the
- older versions of the COSNIX operating system. The typical COSMOS passwords
- are like: WETEST, MILK48, RINGIT. I have known people to guess a pass which
- was a color or an anmimal then they entered other account names and different
- colors and got other pw's, but it is very unlikely that you will guess a pw.
- Some accounts don't have passwords but you will rarely get that lucky.
- Sometimes all you need is the dial-up to get in. Whoever was last on forgot
- to hit CTRL-Y to log off, and just hung up, so when you call, you get the WC%
- sitting there! I hate to have to rely on this method of entry, and prefer
- having an account/password. Well, you are now in, and can do some of the
- things explained in this file.
-
-
- TRANSACTION CODES:
- ----------- ------
-
- Once you log in you should get the prompt of WC% where WC is the Wire Center
- and % indicates that the system is on-line. From that prompt, you can type
- certain commands that will enable you to do different things. The ISH or INQ
- commands (Inquire about a Circuit) will print out various information about the
- number you do it to. From the prompt, type ISH or INQ <C/R>. You will then have
- to type an H which means HUNT then TN which is the Telephone Number 935-2481
- and the system will print an underscore "-". You then type an "." and.........
- WC% ISH
- H TN 935-2481
- -.
-
- TN 935-2481
- ST WK PD DATE 07-16-78 TYPE B
- **ORD F24030161451 DD 01-20-84 FDD 01-20-84
- OE 003-601-403
- ST WK PD DATE 07-16-78 CS 1FR US 1FR FEA RNNL
- **ORD F24030161451 DD 01-20-84 FDD 01-20-84
- LOC WC1014 LOC W13-03L14/4-04
- CP 45-1262
- ST WK PD DATE 11-02-82
- **ORD F24030161451 DD 01-20-84 FDD 01-20-84
- LOC WC1010 LOC W10-06L01/3/12
-
- HUNT SEQUENCE FOR TN 935-2481
- TN 935-2482 TN 935-2484
-
- ** ISH COMPLETED 09-24-84
-
- WC%
-
- Here is an explanation of what was just printed out about the number 935-2481:
-
- LINE 1 --> TN 935-2481
- Is the Telephone number that you inquired about.
-
- LINE 2 --> ST WK PD DATE 07-16-78 TYPE B
- ST means STatus, WK PD is the WorK PerioD, the date following is when the TN
- 935-2481 was first installed, and TYPE sometimes abbreviated as TT is the
- Telephone number Type, where B is a POTs (Personal number) with Hunting.
- Hunting means that when the number 935-2481 is busy, the call will be forwarded
- automatically to the next number until it finds an idle line. The TT TYPE
- could be any one of the following:
-
- B -- POTs hunting.
- C -- Coin.
- G -- Complex services, e.g., Direct
- Inward Dialing, Radio Common
- Carrier, etc.
- O -- Official (company).
- Q -- Centrex, WATS, large PBX's.
- X -- POTs non-hunting.
-
-
- LINE 3 --> **ORD F24030161451 DD 01-20-84 FDD 01-20-84
- ORD stands for service or work ORDer which has a maximum of 20 Alphanumeric
- Characters. DD is the Due Date, and FDD is the Frame Due Date, which I assume
- is/was the last time the line was worked on.
-
- LINE 4 --> OE 003-601-403
- OE stands for Operating Exchange which, in this case is a #1ESS. Check HACKING
- COSMOS Part III for the formats of Operating Exchanges. By seeing what format
- the OE is, you can tell what type of CO the number is served by.
-
- LINE 5 --> ST WK PD DATE 07-16-78 CS 1FR US 1FR FEA RNNL
- ST, WK, PD were all explained in LINE 2, CS is the Customer Class of Service,
- 1FR stands for Flat Rate. US is the USOC (Uniform Service Order Code) which are
- identification codes used on Service Orders and Equipment records to identify
- items of service or equipment. Each code conisists of 3 or 5 characters, each
- one being either a letter or a number. FEA RNNL stands for Customer FEAtures.
- R = Rotary, N = Non-sleeve, N = Non-essential, and L = Loop started. The
- typical type of line is Loop started, A ground start is used on PBX's and such.
-
- LINE 6 --> (repeat of LINE 3)
-
- LINE 7 --> LOC WC1014 LOC 213-03L14/4-04
- LOC is the LOCation.
-
- LINE 8 --> CP 45-1262
- CP is the CablePair 45-1262.
-
- LINES 9-11 --> (Have been previously explained.)
-
- LINE 12 --> HUNT SEQUENCE FOR TN 935-2481
- TN 935-2482 TN 935-2484
-
- As explained earlier, when 935-2481 is busy, it will HUNT to 935-2482 if that
- is busy, it will goto 2483 and so on.
-
- You can also inquire upon the Cable Pair, by:
-
- WC% ISH
- H CP 45-1262
- -.
-
- The information printed will be similar to what was printed about the TN.
-
-
- PATHS, FILES AND DIRECTORIES:
- ------ ----- --- ------------
-
- If you have a semi-priveledged acct., type LS /* to see what files you have
- access to. You will probably see something similar to:
-
- /BIN: /ETC: /USR:
- CP COSNIX BIN
- DATE INIT COSMOS
- ECHO LINES PREOP
- LCASE PASSWD SO
- MOTD SYSGEN SYS
- STAT UIDS TMP
-
- In actuality, these directories/files will be in "single file", I just put them
- in 3 columns to save space/paper.
-
- To run a program/process just type the filename at the WC% promt. If you want
- to view a file in a directory, in this case we will use the /BIN directory,
- you would type:
-
- WC% CD /BIN
-
- You first Connect to the Directory then to print the file MOTD which stands for
- Message Of The Day, type:
-
- WC% PR /MOTD
-
- FRI APR. 10, 1984 11:37:16 MOTD PAGE 1
-
- ATTN: ALL USERS
- MAKE SURE YOU LOG OUT PROPERLY
- THANK YOU
-
- Some files may have an "!" appended to the end of them on the older versions
- of COSNIX, those files should be text files and you should have no problem
- PRinting them. Other files may be encrypted, or you mistook a file for a
- program and all you get is garbage.
-
- If you do not know what directory a file you are looking for is in use the
- FIND <file-name> command. As shown below, PERMIT is what we are looking for:
-
- WC% FIND PERMIT
- /DEV/PERMIT
-
- You can either connect to the /DEV directory then PRint the file or type:
-
- WC% PR /DEV/PERMIT
-
-
- The most looked up file would probably be the PASSWD file.
-
- WC% CAT /ETC/PASSWD
-
- ROOT:YXMDIMME:0::/:
- SYS:YXORBMBX:1::/USR/SYS:
- BIN:TMMZAKZF:3::/BIN:
- PREOP::8::/USR/PREOP:
- COSMOS:LEORVVB4:39::/USR/TMP:/BIN/PERMIT
- PA02:ZSKD4ET:40::/USR/TMP:/BIN/PERMIT
-
- 99 times out of 100 the passwords will be encrypted. Notice that there are 2
- colons after the PREOP account, that means that there is no password, so after
- entering PREOP at the ;LOGIN: it will jump to WC? then if it is a valid WC, you
- will get in. The way COSMOS checks to see if the pass is valid is: after you
- enter your account, and password, the system encrypts the pw you just typed,and
- compares it to the encrypted password in the PASSWD file. If it is correct, you
- will be in, if not, INVALID LOGIN.
-
-
- In Part 3 I will have the PREFIX, FORMATS AND CODE VALUES Chart which gives all
- the needed definitions of the abbreviations that the system prints out when
- performing most transactions.
-
- Lex Luthor
- Legion of Doom!
- Legion of Hackers
-
-
- ACKLOWLEDGEMENTS:
- -----------------
-
- SHARP RAZOR
- THE WARLOCK
-
- And last but not least, I would like to thank SOUTHERN BELL for letting me use
- thier COSMOS facilities to obtain the information needed to write this phile
-
-
- DOWNLOADED FROM P-80 SYSTEMS....