home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky rec.audio:19287 rec.video:16305
- Newsgroups: rec.audio,rec.video
- Path: sparky!uunet!nwnexus!kanefsky
- From: kanefsky@halcyon.com (Steve Kanefsky)
- Subject: Re: Sony TA-E2000ESD DSP A/V Surround Preamp
- Message-ID: <1993Jan23.210328.25938@nwnexus.WA.COM>
- Sender: sso@nwnexus.WA.COM (System Security Officer)
- Organization: The 23:00 News and Mail Service
- References: <brambo-210193101209@143.172.48.212> <C17zCv.Awv@ampex.com> <brambo-220193122157@143.172.48.212>
- Distribution: rec
- Date: Sat, 23 Jan 1993 21:03:28 GMT
- Lines: 22
-
- In article <brambo-220193122157@143.172.48.212> brambo@eco.twg.com (Mark Bramblett) writes:
-
- >What I meant to say is that on the TAE1000ESD, equalization and dynamic
- >range expansion/compression is disabled. So if you have refined an
- >equalization curve that works for your room set up, you cannot take
- >advantage of it when you are in DOLBY SURROUND mode. I was curious if
- >this design limitation had been removed in the new model.
-
- Yes, it has been removed. Pro-Logic is now an attribute of any given
- surround mode in addition to a mode all by itself. You can choose any
- surround mode you want (Hall1, Hall2, Jazz Club, etc.), alter the front,
- center, and/or rear EQ curves, adjust any of the myriad of surround
- parameters (seating position, room size, etc.), adjust the
- expansion/compression, choose whether the Pro-Logic decoder is on or off,
- and save all that in a memory. Three of the ten preset modes have
- Pro-Logic turned on by default: Pro-Logic (of course), Theater1, and
- Theater2. The latter two also have some ambience synthesis and non-flat
- EQ curves by default, but these can of course be altered and stored in a
- user memory.
-
- --
- Steve Kanefsky
-