home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.unix.sys5.r4:1404 comp.unix.pc-clone.32bit:1368 comp.unix.sysv386:17930
- Path: sparky!uunet!opl.com!hri.com!spool.mu.edu!uwm.edu!linac!att!cbnewsm!corey
- From: corey@cbnewsm.cb.att.com (william.c.brown)
- Newsgroups: comp.unix.sys5.r4,comp.unix.pc-clone.32bit,comp.unix.sysv386
- Subject: Re: UHC SVR4 with IDE _AND_ SCSI WD's?
- Summary: No Problem!
- Keywords: UHC SVR4 IDE SCSI
- Message-ID: <1993Jan26.201855.812@cbnewsm.cb.att.com>
- Date: 26 Jan 93 20:18:55 GMT
- References: <1993Jan26.163030.14784@lgc.com>
- Followup-To: poster
- Distribution: usa
- Organization: AT&T
- Lines: 38
-
- In article <1993Jan26.163030.14784@lgc.com>, danson@lgc.com (Doug Anson) writes:
- > Hi;
- >
- > I have UHC SVR4.0.3.6 running on a 386/33 with an IDE drive. I would like to
- > add a SCSI card and second disk that may be accessed by the OS. The root
- > partition would remain on the IDE drive (i.e. it would boot IDE).
- >
- > Is it possible to have such a configuration? Has anyone attempted it?
- >
- > Thanks in advance for any comments, suggestions
- > Doug
- > --
-
-
- This is not a problem with either ESIX 4.0.4 or UnixWare A.S.
- ESIX does not see the drive until you can get the base system
- up and do an dskadd. UnixWare, on the other hand, can see the
- drive and will prompt you to partition it.
-
- I don't think you will have a problem with the UHC stuff either
- since it should be close to the ESIX stuff in nature..
-
- My specific combo is 386/33 with 102MB IDE (primary) and 700MB SCSI
- with Adaptec 1542B controller as secondary drive...
-
- Good luck.
-
-
-
- /* ----- */
- /* Corey Brown (WB0RXQ): 20m, 15m, 2m(146.82) 70cm(443.65) */
- /* AT&T NSD */
- /* Alpharetta, Ga 30202 */
- /* (404)750-8071 */
- /* ----------------- */
- /* att!alphlk!wcb | They're history in terms of the */
- /* attmail!wcbrown | future! (lws-91) */
- /* ----- */
-