home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.transputer
- Path: sparky!uunet!inmos!titan.inmos.co.uk!dogmatix!raw
- From: raw@dogmatix.inmos.co.uk (Bob Wipfel)
- Subject: Re: IMS B437, problem
- Message-ID: <1993Jan28.130730.5025@titan.inmos.co.uk>
- Sender: raw@dogmatix (Bob Wipfel)
- Organization: INMOS Limited, Bristol, UK
- References: <1993Jan27.165749.330@isy.liu.se>
- Date: Thu, 28 Jan 1993 13:07:30 GMT
- Lines: 24
-
- In article <1993Jan27.165749.330@isy.liu.se>, michael@isy.liu.se
- (Michael Hall) writes:
-
- |> We have bought an IMS 437display TRAM. I have some problem to get it
- |> to work with out monitor. The monitor is an ordinary TV-montior (standard
- |> PAL system). The problem is that i can't initialize the hardware correct.
- |> My question is, are there anybody who are using one of this graphics board
- |> with an TV-montior. If so, what are the correct parameter block that shall
- |> be used to initialize the harware?
-
- The IMS-B437 compact display TRAM is capable of driving a TV monitor in
- interlaced mode. However, getting the video timing parameters correct, as you
- have discovered, can be somewhat difficult.
-
- If you e-mail me details of your monitor (make, model and any timing
- parameters you have from its manual) I'll see if I can generate you a video
- parameter block. Details of your software would be useful also, what language,
- tools (IMS-F003C etc?) are you using?
-
- --
- | Bob Wipfel Inmos Ltd, Bristol | EMail(UK) ukc!inmos!raw
- |----------------------------------------| or raw@inmos.co.uk
- | The opinions above are my personal | Internet: raw@inmos.com
- | views and do not reflect Inmos policy. | UUCP:(US) uunet!inmos.com!raw
-