home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.apollo
- Path: sparky!uunet!mcsun!sun4nl!dutrun!donau!dutentb!antoon
- From: antoon@dutentb.et.tudelft.nl (Antoon Frehe)
- Subject: Followup Adding a second disk etc ...
- Message-ID: <1993Jan21.132139.13556@donau.et.tudelft.nl>
- Sender: news@donau.et.tudelft.nl (UseNet News System)
- Nntp-Posting-Host: dutentc.et.tudelft.nl
- Organization: Delft University of Technology, Dept. of Electrical Engineering
- Date: Thu, 21 Jan 1993 13:21:39 GMT
- Lines: 28
-
- Hi,
-
- Thanks for all the replies. i must admit, i'd seen this jumper program
- somewhere before, but now i just hadn't thought of it.
-
- I haven't tried everything yet, but people are starting to complain the
- Apollo is too often of the air because i'm busy playing with it's disks.
- There's a few strange things. When i use the jumper program, the layout of
- the WD7000 board doesn't look a bit like the my WD7000V-ASE (to be exact).
- Also David Krowitz says the WD7000 has 3 connectors. Mine has 4.
- 2 34 pin connectors and 2 20 pin connectors. Is it so that i have to
- chain the cables from one disk to the other or cab or must i use
- seperate cables from the controller to the disks?
-
- Most disturbing however is a line from the jumper program when i look
- at the Micropolis 155 Mb drive. It reads..
-
- 155 Mb Drives are Not Supported for Multiple Disk Configuration.
-
- Greetings Antoon.
-
- --
- ---------------------------------------------------------------------------
- Antoon Frehe E-mail antoon@dutentb.et.tudelft.nl
- University of Technology Delft a.frehe@et.tudelft.nl
- Mekelweg 4, 2628 CD Delft
- The Netherlands, Earth phone 015 781796
- ---------------------------------------------------------------------------
-