home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!spool.mu.edu!enterpoop.mit.edu!eru.mt.luth.se!lunic!sunic!nobeltech!ppan
- From: ppan@nobeltech.se (Per Andersson)
- Newsgroups: comp.protocols.snmp
- Subject: Re: CableTron MiniMMAC reports only 1 interface
- Message-ID: <1993Jan21.092755.23543@nobeltech.se>
- Date: 21 Jan 93 09:27:55 GMT
- References: <1j72f7INN5pj@gaia.ucs.orst.edu> <1993Jan15.142317.2091@msus1.msus.edu>
- Distribution: inet
- Organization: NobelTech AB
- Lines: 22
-
- In article <1993Jan15.142317.2091@msus1.msus.edu> mndot@msus1.msus.edu writes:
- >In article <1j72f7INN5pj@gaia.ucs.orst.edu>, leach@OCE.ORST.EDU (Tom Leach) writes:
- >> I've just received a couple of CableTron MiniMMACS with the SNMP board
- >> installed (the NCMM board). When I fire up snmpwalk (cmu snmp V1.1b) or
- >> SunNet Manager (V1.2 or 2.0), they all report just 1 interface.
- >I believe this is the correct response. Their is truely only one interface.
- >It is either the AUI connector or the Fiber connector to your backbone. I
- >could be wrong on this but it seems to be consistent with the rest of
- >cabletron's equipment and how they report.
-
- Or, if that is not the answer, perhaps your box doesn't have all ports
- enabled. I've often been tricked by the fact that you have to enable
- new ports from the terminal port when installing new cards in the MMAC.
-
- /Per
-
-
- --
- -----------------------------------------------------------------------------
- Per Andersson - ppan@nobeltech.se (perand@stacken.kth.se on free time)
- Managing networks at, but not speaking for Nobeltech AB, J{rf{lla, Sweden
- -----------------------------------------------------------------------------
-