home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!gatech!europa.asd.contel.com!howland.reston.ans.net!spool.mu.edu!uwm.edu!linac!att!bu.edu!dartvax!saturn.caps.maine.edu!gandalf!jurlwin
- From: jurlwin@gandalf.UMCS.Maine.EDU (Jeff Urlwin)
- Newsgroups: comp.os.os2.misc
- Subject: Re: CorelSCSI ...Help!
- Message-ID: <1993Jan22.165144.26533@gandalf.UMCS.Maine.EDU>
- Date: 22 Jan 93 16:51:44 GMT
- References: <1jo5i1INNdjm@geraldo.cc.utexas.edu>
- Organization: University of Maine, Department of Computer Science
- Lines: 37
-
- In article <1jo5i1INNdjm@geraldo.cc.utexas.edu> futeh@ccwf.cc.utexas.edu (Futeh Kao) writes:
- >I bought the CorelSCSI drivers. Obviously, I can't use the ASPILS_O.SYS
- >ASPI manager since I have a AHA1742 card. I have the following lines
- > BASEDEV=AHA174X.ADD
- > BASEDEV=OS2ASPI.DMD
- > DEVICE=C:/CORELDRV/OS2/SMR_ASP.SYS
- >
- >Well, when I booted up my system, it whined about no ASPI manager
- >(what about the os2aspi.dmd?) and the smr_asp.sys is not installed.
- >After that I can't use any of the utilities because they all complained
- >about no ASPI. The documnetation is so "undocumented" that I'm left
- >clueless. Can anyone help?
-
- Hi...you need to tell hte AHA174X.ADD to not give control of your device
- to the Scsi manager (OS2SCSI.DMD) or the DASD manager (OS2DASD.DMD).
- If the device you want Corel SCSI to control is SCSI id 4, then:
-
- BASEDEV=AHA174X.ADD /A:0 /!SM:4 /!DM:4
-
- The A: option specifies controller 0 (the only one on my system).
- The !SM and !DM tell AHA174X.ADD not to give the Scsi Manger and the Dasd
- Manager control of the device id 4 (in this case).
-
- Even though I only have 1 adapter, it seems that I have to specify the A:0
- anyway...
-
- >Help Mr. Sipple
-
- I'm not quite him, but I think I helped :)
-
- Jeff
-
-
-
- --
- --------------------------------------
- jurlwin@gandalf.umcs.maine.edu
-