home *** CD-ROM | disk | FTP | other *** search
/ NetNews Usenet Archive 1993 #3 / NN_1993_3.iso / spool / comp / dcom / modems / 19947 < prev    next >
Encoding:
Text File  |  1993-01-24  |  2.0 KB  |  46 lines

  1. Newsgroups: comp.dcom.modems
  2. Path: sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!bgsuvax!sarnold
  3. From: sarnold@andy.bgsu.edu (G. Steve Arnold)
  4. Subject: Re: why does sz break ?
  5. Message-ID: <C1DzJz.9GC@andy.bgsu.edu>
  6. Organization: Bowling Green State University B.G., Oh.
  7. References: <1993Jan24.231743.27900@ornl.gov>
  8. Date: Mon, 25 Jan 1993 01:45:32 GMT
  9. Lines: 35
  10.  
  11. gsgathin@sacam.OREN.ORTN.EDU (golando s gathings) writes:
  12. > I am trying to install rz and sz on a sparc station to allow
  13. > tranfers via a dial-in thru a DCA box or a xyplex terminal
  14. > server.  I compile the source code using the 'bsd' switch
  15. > when I try to to download the file using sz on the host side
  16. > and a pc on the local side , it immediately aborts the xfer
  17. >   I have also used the 'sz -TT filename ' command to see
  18. > if the above boxes are stripping  control characters.  It
  19. > returns saying that mode(2) in the rbsb.c module is not 
  20. > implemented.  
  21. > Does any one have any ideas on when the above is happening ?
  22.  
  23.     Yeah, sounds like the problem here about a year ago when they
  24. installed a xyplex server. the fix for us was to establish the connection
  25. with the proper host and then, before you sz *** (whatever), send a 
  26. modem break (ctrl-END for most DTE software) and enter the following
  27. commands at the XYPLEX prompt...
  28.  
  29. set session pasthru
  30. set port flow disable
  31.  
  32.     Then resume your host session and sz away! Ihave *NO* idea if this 
  33. will work for you 'cause I have *NO* idea how close your setup is to this 
  34. one, plus i know almost nothing about the tech. aspects of DCA boxes.
  35. Give this a shot if you haven't tried it already -- if this doesn't work,
  36. I'd also try disabling error correction and adaptive rate negotiation
  37. before you dial -- this seems to help sometimes, too.
  38.  
  39.     --steve
  40.  
  41. -- 
  42.    The only difference between a Communist        G. Steve Arnold
  43.    and a Socialist is that the Socialist will     Dept. Math and Stats.
  44.    only confiscate the resources that are         BGSU
  45.    profitable.                                    sarnold@andy.bgsu.edu
  46.