home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!julienas!chorus!opera.chorus.fr!ngk
- From: ngk@opera.chorus.fr (Gia-Khanh Nguyen)
- Newsgroups: sci.electronics
- Subject: Speakers loose tweeters and filter elements
- Keywords: Audio, PA, Speaker
- Message-ID: <1517@chorus.chorus.fr>
- Date: 22 Dec 92 15:42:05 GMT
- Sender: ngk@chorus.chorus.fr
- Reply-To: ngk@opera.chorus.fr (Gia-Khanh Nguyen)
- Organization: Chorus systemes, Saint Quentin en Yvelines, France
- Lines: 84
-
-
-
- Hi netters,
-
- I have a pair of JAMO-300 speakers. Their specification is:
-
- - 8 Ohm impedance.
- - 300 W / each.
- - 4 ways SP system with passive filters.
-
- I use them with a Samick SM-6000 Stereo Power Amplifier (250W/channel)
- for dancing parties.
- The problem is that I often have the tweeters and/or some capacitors of the
- filters broken, but never the other elements. I think that the filters for
- the broken tweeters are not well designed or it misses some sort of protection.
- So I'm wondering if any one can tell me how to avoid such a situation for the
- next time I use them (i.e. an active/passive protection circuit or a
- modification in the filters).
-
- I give you here the diagram of one speaker system :
-
-
- +-------+------------+----------------+------------------------+
- | | | | |
- | | C1 -+- C2 -+- +---+---+
- | | -+- -+- | |
- | |-| | | + | | +
- | | | |-| +----+ |\+-+ +-+/|
- | L1 | | L2 | | | | T1 | | | T2| | |
- + | | | | | C3 -+- |-| |/+-+ +-+\|
- o-----+ |-| | | -+- | | + | | +
- | |-| | L3| | +---+---+
- To PA | | + | | | |
- o--+ | | |\+-+ |-| |-|
- - | +----+ +----+----+ T3 | | | | R1 | |
- | | | | | | |/+-+ | |-|
- | | | | |-| | + | | |
- | + | | + | L4| | | +----+ |
- | |\+-+ -+-C4 |\+-+ | | -+-C5 | | |
- | B1| | | -+- | | | | | -+- |-| |-| C6 -+-
- | |/+-+ | M1|/+-+ |-| | R2| | | |R3 -+-
- | + | | + | | | |-| |-| |
- | | | | | | | | |
- | | | | | | | | |
- +-----+----+-------+----+----+-----------+----+-------------------+
-
-
- all capacitors are bipolar chemical capacitors
- C1 = 10uF, C2 = 3.3uF, C3 = 4.7uF, C4 = 22uF, C5 = 10uF, C6 = 1uF
-
- Li are air/iron core selves (inductance) values are unknown.
-
- all resistors are winding/carbon 10W resistors.
-
- R1 = 12 Ohms, R2 = 10 Ohms, R3 = kind of varistor (ceramic disk form)
-
- B1 = bommer, M1 = medium speaker, T3 = medium-tweeter, T1=T2 = tweeters
-
-
- What happened:
-
- T3/C3 are broken very often.
- T1 and T2 eventually.
- M1/C5 sometimes.
- B1 never broken.
-
-
- Thank you very much for any advice.
-
-
- Gia-Khanh Nguyen (ngk@chorus.fr)
-
-
-
-
-
-
-
-
-
-
-
-
-
-