home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!zaphod.mps.ohio-state.edu!darwin.sura.net!udel!princeton!pucc!AUXPOST
- From: levan%eagle@EKU (Jerry LeVan)
- Sender: VMNNPOST@pucc.Princeton.EDU (Listserv to Netnews Gateway)
- Newsgroups: comp.unix.aux
- Subject: Xlisp
- Message-ID: <9212301657.AA12672@eagle>
- Date: Wed, 30 Dec 1992 11:57:37 -0500
- Organization: Listserv to Netnews Gateway at pucc.Princeton.EDU
- Approved: AUXPOST@PUCC
- Lines: 33
-
- Hello,
-
- I recently downloaded xlisp 2.1e from glia.biostr.washington.edu and it compiled
- without a hitch. The only change I needed to make was to:
- 1) redefine CC in the makesysv file. (they used the sun sysv compiler na
- me)
- 2) replace some spaces with a tab in the action lines of the makesysv ma
- ke
- file.
-
- ********************************************************************************
- *****
- Has anyone had this problem?
-
- I installed the HDFD drive and rom upgrade in my macII (and added four 4 meg sim
- ms).
- I have a DayStar 40 MHZ accelerator card with cache.
-
- If I turn on the cache, my mac will die within 40 minutes. ( Macsbug says bad
- read and its never the same place.) With the cache card turned off my mac will
- run forever.
-
- This is the second Daystar card. They are pointing the finger at the ROM upgrade
- ,
- Does this make any sense?
-
- My local dealer has agreed to replace the ROM.
-
- I don't understand why it is taking so long to croak when the cache (on the
- accelerator) is turned on.
-
- Jerry
- Jerry LeVan ( levan%eagle@eku.bitnet or matlevan@eku.bitnet )
-