home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!mcsun!fuug!kiae!demos!glas!irl
- From: irl@glas.apc.org
- Newsgroups: comp.sys.sun.admin
- Date: 27 Dec 92 04:18 MDT
- Subject: What's going with tip?
- Sender: Notesfile to Usenet Gateway <notes@glas.apc.org>
- Message-ID: <57800052@glas.apc.org>
- Nf-ID: #N:glas:57800052:000:1118
- Nf-From: glas.UUCP!irl Dec 27 04:18:00 1992
- Lines: 37
-
-
- Dear colleagues,
-
- I apologise if it is a FAQ, but I am a new person in the Sun world.
-
- My task was to connect Telebit T-2500 to our Sun-3/160 in order we can
- use it both for dial-in and dial-out connections. Sun-3/160 runs SUN OS 4.1.1.
- Modem is to be connected to the ALM-2 Multiplexor.
-
- I done all the things enlisted in documentation.
- 1) I rebuilt the kernel with proper flags for mcp0
- 2) I done
- mv /dev/ttyh0 /dev/ttyd0
- mknod /dev/cua0 c 44 128
- 3) I updated /etc/ttytab with the line
- ttyd0 "getty std.9600" vt100 on remote
- 4) I made an entry in /etc/remote like
- TEL0:\
- 5) I setup modem for valid carrier detect report via
- ATS131=1
-
- It works fine with one noticeable exception. tip doesn't work. It connects
- to modem (anyway it says "connected") but no characters are transmitted.
- Such behavior seems to be especially strange because kermit works fine, and
- even cat smth. > /dev/cua0 works.
-
- I suppose that it is tip problem, but how to get around it?
-
- Thanks in advance,
-
- Volodya Gurevich.
-
- Moscow IRIS Data Center System Administrator.
- e-mail: irl@glas.apc.org
-
- Moscow, Russia.
-
-