home *** CD-ROM | disk | FTP | other *** search
- Xref: sparky comp.sys.next.sysadmin:7209 comp.dcom.modems:18482
- Newsgroups: comp.sys.next.sysadmin,comp.dcom.modems
- Path: sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!wupost!csus.edu!netcom.com!gerg
- From: gerg@netcom.com (Greg Andrews)
- Subject: Re: Telebit 3000 Init string for NeXT station Turbo?
- Message-ID: <1992Dec25.012639.27222@netcom.com>
- Organization: Netcom Online Communications Services (408-241-9760 login: guest)
- References: <1992Dec24.034936.1528@colorado.edu>
- Date: Fri, 25 Dec 1992 01:26:39 GMT
- Lines: 26
-
- cary@aurora.colorado.edu (John R. Cary) writes:
- >
- >Re: What is correct setup for Telebit 3000 on a NeXT?
- >
-
- The &F3 pre-stored configuration.
-
- >
- >I am running NeXT3.0 on a NeXT station turbo. I bought a Telebit 3000
- >and a NeXT hardware handshaking cable and hooked it all up to go, but
- >I have no go on dialin.
- >
- >My configuration works fine on dialout. I use kermit.
- >But on dialin, the login herald never shows up - only a few x's,
- >as if a baud rate were incorrect.
- >
-
- Set the modem to use the &F3 settings, and set your getty to 19200 bps.
-
- -Greg
- (Telebit Engineer)
- --
- ::::::::::::::::::: Greg Andrews gerg@netcom.com :::::::::::::::::::
- ObDrieux: MODERN PROBLEMS: Hi Diddle Diddle, The Cat and the Fiddle,
- The Cow Blew Up on the Launching Pad
- :::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
-