home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!news
- From: rusty@cs.utexas.edu (Christopher Russell Rice)
- Newsgroups: comp.sys.ibm.pc.hardware
- Subject: TEAC FD505 Combo Drive
- Date: 29 Dec 1992 07:53:41 -0600
- Organization: University of Texas at Austin, Dept of Computer Sciences
- Lines: 12
- Distribution: usa
- Message-ID: <lk0m35INNg0o@levelland.cs.utexas.edu>
- NNTP-Posting-Host: levelland.cs.utexas.edu
- Keywords: teac, floppy drive
-
- Has anyone successfully installed a TEAC FD505 Dual Floppy Drive with
- an internal QIC-40 (Archive 5540i) tape drive running off the floppy
- controller? I know it's possible to hook up the 5540i with 2 floppy drives
- using only a 3 connector floppy cable, no add-in board is necessary, but
- the DS and terminating resistor combination eludes me. The FD505 is
- set to use DS 1 and DS 2 and the 5540i to use DS 3, but the tape backup
- software doesn't seem to find the tape drive at DS 3.
-
- Any suggestions?
-
- RuSTy,
- rusty@cs.utexas.edu
-