home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.os.os2.apps
- Path: sparky!uunet!psinntp!openwx!mikel
- From: mikel@networx.com (Mike Lempriere)
- Subject: Re: YEE F**KIN' HA - SP Finally Installed
- Message-ID: <1992Dec21.213707.7710@networx.com>
- Sender: usenet@networx.com (Usenet News Account)
- Organization: NetWorx
- X-Newsreader: TIN [version 1.1 PL6]
- References: <8fAY8CW00iV2A3sVh8@andrew.cmu.edu>
- Date: Mon, 21 Dec 1992 21:37:07 GMT
- Lines: 22
-
- Jason Ari Goldstein (jg3o+@andrew.cmu.edu) wrote:
- : Hey now,
- :
- : Well, it turns out that because I had a second monochrome video card
- : installed the service pack wasn't happy. Well, since I blew my
- : monochrome monitor a couple of weeks back I had no qualms about not
- : installing for 2 monitors. Any way, it installed no problem with the
- : exception of it isn't in 1024x768 mode. How do I get it to change?
- : Thanks.
- [.sig deleted]
- ------------------------------------------------------------------------------
- Just to let you know, I'm using Trident SVGA and an old monchrome with
- OS/2 2.0 and the CSD. It does work. In case it might help, the following
- is extracted from my config.sys.
-
- rem --- Display settings ---
- DEVINFO=SCR,SVGA,D:\OS2\VIOTBL.DCP
- DEVICE=D:\OS2\MDOS\VSVGA.SYS
- rem DEVICE=D:\OS2\MDOS\VMONO.SYS
- SET VIDEO_DEVICES=VIO_VGA,VIO_MPA
- SET VIO_VGA=DEVICE(BVHVGA,BVHSVGA)
- SET VIO_MPA=DEVICE(BVHMPA)
-