home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!hayes!tnixon
- From: tnixon@hayes.com
- Newsgroups: comp.dcom.modems
- Subject: Re: hayes response codes and uugetty/getty
- Message-ID: <6609.2b43778e@hayes.com>
- Date: 31 Dec 92 22:43:26 EDT
- References: <1992Dec30.043842.3548@daimi.aau.dk>
- Organization: Hayes Microcomputer Products, Norcross, GA
- Lines: 19
-
- In article <1992Dec30.043842.3548@daimi.aau.dk>, eks@daimi.aau.dk (Eigil Krogh S|rensen) writes:
-
- > With hayes compatible modems you can't disable the "RING" and "CONNECT" mesgs.
- > on incomming calls without disabling all response codes, or can you ?
-
- With many newer modems, you can. The "Q2" command causes the modem
- to disable all result codes associated with answering of calls,
- including RING, CARRIER, PROTOCOL, COMPRESSION, CONNECT, etc., but
- leave them enabled when originating calls -- exactly what you're
- looking for. You don't mention what modem you have, so it's hard to
- say whether or not it supports Q2, but it wouldn't hurt to try
- setting it and then calling to see if you get a RING.
-
- --
- Toby Nixon, Principal Engineer | Voice +1-404-840-9200 Telex 401243420
- Hayes Microcomputer Products, Inc. | Fax +1-404-447-0178 CIS 70271,404
- P.O. Box 105203 | BBS +1-404-446-6336 AT&T !tnixon
- Atlanta, Georgia 30348 | UUCP uunet!hayes!tnixon Fido 1:114/15
- USA | Internet tnixon@hayes.com
-