home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!charon.amdahl.com!pacbell.com!ames!elroy.jpl.nasa.gov!sdd.hp.com!zaphod.mps.ohio-state.edu!saimiri.primate.wisc.edu!zazen!uwec.edu!mcelwre
- From: mcelwre@cnsvax.uwec.edu
- Newsgroups: sci.environment
- Subject: Gravity-NEUTRALIZING AIRcraft
- Message-ID: <1992Nov17.171834.2404@cnsvax.uwec.edu>
- Date: 17 Nov 92 17:18:33 -0600
- Organization: University of Wisconsin Eau Claire
- Lines: 72
-
-
-
- Gravity-NEUTRALIZING Air/Spacecraft
- or ZERO/REDUCED-Gravity Chamber
-
- NASA should build an experimental spacecraft based on
- U.S. Patent #3,626,605 [at least $3.00 per complete copy from
- U.S. Patent Office, 2021 Jefferson Davis Hwy., Arlington, VA
- 22202; correct 7-digit patent number required. Or try getting
- it via your local public or university library's inter-library
- loan dept..], titled "METHOD AND APPARATUS FOR GENERATING A
- SECONDARY GRAVITATIONAL FORCE FIELD", awarded to Inventor
- Henry W. Wallace on Dec. 14, 1971.
-
- In the patent, Figs. 7A and 7B are basically side views
- of a gravity-NEUTRALIZING FLYING SAUCER, or, if anchored to
- the ground, a ZERO-GRAVITY CHAMBER [which could have MANY
- possible GROUND-level applications for science, medicine,
- manufacturing, etc.]. Each oval diagram shows a motor
- spinning a central disc at a very high speed, about 28,000
- RPM, and also rotating two other discs sandwiched around the
- first disc, via gears, at a much slower speed, perhaps 2,800
- RPM, in the opposite direction. The two outer discs have
- extensions [counter-balanced via off-center axis] that, as
- they rotate, alternately make contact with two wide
- extensions from opposite walls of the spacecraft. The
- central disc should have shallow spiral-shaped grooves on
- both sides for air-bearings, to allow the needed very close
- contact with the two outer discs.
-
- I should clarify that each of the two outer discs has
- ONLY ONE [counter-balanced] extension, each one pointed
- opposite (180 degrees) the extension of the other disc.
-
- VERY CLOSE CONTACT must be made as the disc extensions
- slide past the wall extensions in order to conduct the
- "Kinemassic" Energy (term coined by the Inventor) from the
- discs to the walls in an ALTERNATING CIRCULATION.
-
- The most important factor making it work is that the
- discs, extensions, and outer walls of the spacecraft MUST be
- made of any material(s) in which a very large majority of the
- atoms are of isotopes having "half integral atomic spin",
- such as copper (3/2). All other parts, etc., should have a
- minority of such atoms. [See the appropriate column of the
- table of isotopes in the latest edition of "The Handbook of
- Chemistry and Physics."]
-
- Experimenters should use one motor to spin the center
- disc, and a 2ND SEPARATE motor to rotate the two outer discs,
- so their relative speeds can be varied to establish the
- needed conditions for PROPULSION of the spacecraft via
- "NEGATIVE WEIGHT" (with the spacecraft's "Kinemassic" field
- PUSHING AGAINST the earth's gravitational field, etc.).
-
-
- If we have to put up a space station, establish Moon
- bases, go to Mars, rendezvous with comets, etc., WHY DO IT
- THE HARD WAY?!
-
- Your favorite university or research company could make
- a big name for itself by making a small model of this work.
-
-
- UN-altered REPRODUCTION and DISSEMINATION of this
- IMPORTANT Information is ENCOURAGED.
-
-
- Robert E. McElwaine
- B.S., Physics and Astronomy, UW-EC
-
-
-