home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.unix.xenix.sco
- Path: sparky!uunet!ukma!wupost!spool.mu.edu!umn.edu!csus.edu!netcom.com!gerg
- From: gerg@netcom.com (Greg Andrews)
- Subject: Re: DialT1000
- Message-ID: <1992Nov15.211528.25846@netcom.com>
- Organization: Netcom Online Communications Services (408-241-9760 login: guest)
- References: <Bxq6AG.4J7@abode.ttank.com>
- Date: Sun, 15 Nov 1992 21:15:28 GMT
- Lines: 28
-
- In article <Bxq6AG.4J7@abode.ttank.com> eric@abode.ttank.com (Eric C. Bennett) writes:
- >
- >I am looking for a dialer program for my T1000. If anyone has this I would
- >greatly appreciate it if they would email it to me. If not, I would appreciate
- >someone mailing me there S register configuration on their T1000.
- >
- >If you have the source for the above mentioned dialer I can compile it, if you
- >only have the binary it needs to be compatible with SCO XENIX 2.3.3
- >
-
- You already have the source and executable. Use dialTBIT.
-
- Simply reset your modem to the Enhanced Command Mode. You can let dialTBIT
- configure your modem for you (which would require you to set up a getty
- that cycles 19200-->2400-->1200-->300-->19200), or you can have dialTBIT
- configure the modem and then you can cu to the modem and type "ATS66=1"
- (which allows a fixed speed getty at 19200).
-
- If you want a complete guide to setting up your SCO system as well as
- the modem, call Telebit tech support. +1-800-TELEBIT or +1-408-734-5200
- or modems@telebit.com.
-
-
- --
- .------------------------------------------------------------------.
- | Greg Andrews | UUCP: {amdahl,claris}!netcom!gerg |
- | | Internet: gerg@netcom.COM |
- `------------------------------------------------------------------'
-