home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.ibm.pc.hardware
- Path: sparky!uunet!stanford.edu!ames!pasteur!euler.Berkeley.EDU!wblee
- From: wblee@euler.Berkeley.EDU (Wen-Po Bobby Lee)
- Subject: Re: Laser Printer Problem (repost)
- Message-ID: <1992Nov16.174022.3422@pasteur.Berkeley.EDU>
- Keywords: form feed, The Printer Works
- Sender: nntp@pasteur.Berkeley.EDU (NNTP Poster)
- Nntp-Posting-Host: euler.berkeley.edu
- Organization: University of California at Berkeley
- References: <1992Nov10.235743.210@pasteur.Berkeley.EDU>
- Distribution: usa
- Date: Mon, 16 Nov 1992 17:40:22 GMT
- Lines: 19
-
- I am reposting this because I did not get any responses.
- HELP! Someone must know the answer!!!
-
- >I have a curious problem. Someone I know has a laser printer from
- >The Printer Works, model LX-29000. If any of you have seen this printer
- >before, you may have noticed that there are no buttons, just some LEDs and
- >a power switch. The owner of this printer would like to toggle the print
- >capture from his program, Procomm v2.4.3 (DOS). However, since an EOF is
- >never sent, and there is no OFF LINE and FORM FEED button, he is unable to
- >print what shows up on his screen. Does anyone know any solutions to this
- >problem? Can a signal be sent manually?
- >
- >Please reply by email to this address. Thanks.
- >wblee@euler.berkeley.edu
-
- Does Windows 3.1 Print Manager have anything to do with it? Is it because
- this is a postscript printer, and the data is ASCII test? Thanks.
-
- --Bobby
-