home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!walter!att-out!pacbell.com!ames!saimiri.primate.wisc.edu!zaphod.mps.ohio-state.edu!swrinde!network.ucsd.edu!sdcc12!xm9
- From: xm9@sdcc12.ucsd.edu (richard g. adair)
- Newsgroups: comp.sys.hp
- Subject: Re: Correct way to set up terminal type on HP/UX
- Summary: xterm and SUNs
- Keywords: xterm rlogin
- Message-ID: <41188@sdcc12.ucsd.edu>
- Date: 18 Nov 92 15:53:22 GMT
- References: <1992Nov17.215102.24942@asihub.sd.cadence.com> <cjw.722048358@moo.acns.nwu.edu>
- Sender: news@sdcc12.ucsd.edu
- Distribution: na
- Organization: Arete Associates, San Diego
- Lines: 17
- Nntp-Posting-Host: sdcc12.ucsd.edu
-
- In article <cjw.722048358@moo.acns.nwu.edu> cjw@moo.acns.nwu.edu (Christopher Wargaski) writes:
- >ericw@asihub.sd.cadence.com (Eric D. Williams) writes:
- >> I have a pretty basic problem (which is not in the FAQ):
- >> I'm sitting in front of a Sun/DEC/Mips/IBM, running X.
- >> I use xterms.
- >> I rlogin into an HP 9000/710.
-
- If it hurts, don't do that! :-). Try this instead: issue a command
- from the sun like "rsh hpname xterm -ls -display hpname:0.0" instead
- of logging in remotely via rlogin. This way, the xterm is actually
- running on your HP, not on your SUN. Works better.
-
- Could this be one for the FAQ?
-
- Tony Burzio
- Arete Associates
- San Diego, CA
-