home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!cs.utexas.edu!torn!newsserver.cs.uwindsor.ca!jabba!wizofhoz!ghazi
- From: ghazi@wizofhoz.uucp (Ozzie)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: ECS Denise and 1084
- Message-ID: <ghazi.05hd@wizofhoz.uucp>
- Date: 20 Nov 1992 01:22:51 GMT
- References: <charro.722047439@ee.ualberta.ca>
- Organization: Not an Organization
- Lines: 29
-
- In article <charro.722047439@ee.ualberta.ca> charro@ee.ualberta.ca (Dan Charrois) writes:
- >I have an A500 with ECS Agnus, but the standard Denise. I would like
- >to run my workbench in SuperHires, and am wondering if my 1084 monitor
- >could cope with the signal if I were to buy an ECS Denise. As well,
- >if I were to buy a flickerfixer, could it work with SuperHires
- >Interlaced, or just the original standard Denise video modes?
- >
- >I understand (I think) that I'd need a multisync monitor to view
- >Productivity modes, but I wouldn't mind a SuperHires interlaced
- >workbench if it's possible with my old 1084.
- >
- >Thanks for your help...Dan
-
- You can use Superhires interlaced with the 1084. For some odd
- reason though you should bypass a flicker fixer when using superhires or
- productivity mode, of the two types I know of one automaticly bypasses the
- fixer and the other has a bypass switch for using the two new modes the ECS
- Denise gives you. Again I'm fuzzy on the whys, so maybe someone can explain
- it better.
-
- --
-
- RETURN ADDRESS IS: cs.uwindsor.ca!jabba!wizofhoz!ghazi
-
- ///
- ///AMIGA! POWER FOR THE DREAMER
- Ghazi Hage uucp:jabba!wizofhoz!ghazi ///
- \\\/// WINDSOR, ONTARIO,CANADA
- \XX/
-