home *** CD-ROM | disk | FTP | other *** search
- Path: sparky!uunet!ornl!rsg1.er.usgs.gov!darwin.sura.net!wupost!gumby!destroyer!ncar!csn!tware!sugs!landis
- From: landis@sugs.tware.com (Hale Landis)
- Newsgroups: comp.os.os2.misc
- Subject: Trouble with ESDI and OS/2?
- Distribution: world
- Message-ID: <721832405snx@sugs.tware.com>
- Date: Sun, 15 Nov 92 13:00:05 GMT
- Organization: SUGS
- Lines: 13
-
- You can't have two disk controllers at the same I/O port
- addresses. This may be your problem. Unless you have set the
- jumpers on your ESDI controller and/or your IDE (ATA) host
- adapter correctly you probably do have two controllers at the
- same I/O port addresses. If one controller is at 1f0-1f7, the
- other should be at 170-177. Beware, under DOS, you won't be able to
- see the controller at 17x unless it has an INT 13 ROM or you load
- a device driver in config.sys!
-
- --------------------------------------------------------
- Hale Landis Ph 408-423-4017
- landis@sugs.tware.com -or- hale_landis@notes.seagate.com
- --------------------------------------------------------
-