home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
PC World 1997 November
/
PCWorld_1997-11_cd.bin
/
hardware
/
ovladace
/
Sit
/
3com
/
edisk
/
3c562x.exe
/
HELP
/
BANYAN.TXT
next >
Wrap
Text File
|
1996-11-11
|
3KB
|
119 lines
3Com Corporation
NDIS 2.01 Drivers Installation Notes
Banyan VINES
------------
To install VINES 6.0 software on a DOS NDIS
workstation, follow these instructions. DOS must be
installed on the target workstation C: drive, or you
must have a bootable DOS floppy.
1. Use the DOS MD command to create a subdirectory
called \VINES.
2. Copy the contents of the VINES LAN S/W (DOS)
Install diskette into the \VINES subdirectory.
3. Copy the contents of the NDIS subdirectory on
the VINES LAN S/W (DOS) 2 of 2 diskette into the
\VINES subdirectory.
4. Copy the PROTOCOL.INI fragment from the
\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3
subdirectory on the EtherDisk diskette to the
\VINES subdirectory.
5. Copy 3CELCM.EXE and ELPC3X.DOS from the NDIS\DOS
directory of the EtherDisk to the \Vines
subdirectory.
6. Edit the PROTOCOL.INI file to read as follows:
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[VINES_XIF]
DRIVERNAME = NDISBAN$
BINDINGS = ELINKPC3
[ELINKPC3]
DRIVERNAME = ELPC3$
7. Run the PCCONFIG.EXE program located in the
\VINES subdirectory.
8. Select option 1, Network Card Settings.
9. Select the NDIS Ethernet option.
10. The NDIS workstation screen appears. Enter the
IRQ that you selected for the EtherLink/PC Card
adapter. Select the IRQ using the Configuration
and Diagnostic Program.
11. Press F10 twice to return to the first menu.
Select option 2, Login Environment Settings.
In the next screen select option 1, Default
Communications Driver. In the next screen
scroll down to NDIS Ethernet and press enter.
Exit PCCONFIG by pressing F10 at each stage to
save the new configuration.
12. Edit the CONFIG.SYS file and add the following
lines, substituting A: for C: for a floppy
disk installation.
DEVICE = C:\VINES\PROTMAN.DOS /I:C:\VINES
DEVICE = C:\VINES\3CELCM.EXE
DEVICE = C:\VINES\ELPC3X.DOS
13. Add the following line to the AUTOEXEC.BAT
file.
cd \VINES
BAN
cd \
BAN loads the NDISBAN drivers and reads the
PCCONFIG.DB file to invoke changes made during the
PCCONFIG stage.
=========================================================
SYSTEM.INI information
=======================
In order for the modem to function correctly
in MS Windows, add the following commands to your
Window's SYSTEM.INI file under the [386Enh] category:
(In case they are not there already)
[386Enh]
:
:
COM1Base=3F8
COM1Irq=4
COM2Base=2F8
COM2Irq=3
COM3Base=3E8
COM3Irq=4
COM4Base=2E8
COM4Irq=3
=========================================================
=========================================================
Please Note
============
Although the driver name is ELPC3X.DOS, the internal
driver name (used in PROTOCOL.INI) is ELPC3$
=========================================================
(%VER NDIS - Banyan VINES v2.0e)