37 Visio and Visio Setup require Windows 3.1, Windows 95 or Windows NT 3.51 or later.
38 You do not have enough disk space available to install
39 Visio with all the options specified.
41 VISIOLTE
42 Visio Sampler
43 VISBETA
44 OLE libraries or Visual Basic(tm) libraries are in use. It is recommended that you choose Cancel, close all applications using OLE or Visual Basic, and then restart Setup.\n\n
45 If you choose OK, setup may need to restart Windows after installation is complete and install the required libraries.
46 /n
47 Setup initialization failed, please contact Visio Technical Support at 0800 132 047 (dial +353 1 7060185 if you are calling outside of The United Kingdom).
51 /r
52 VISIO.EXE
53 VISTUTOR.EXE
54 SETUP.HLP
55 Setup has detected Visio is currently in use. Please select OK now and close all instances of Visio, then run Setup again.
56 utils\shpdata.exe
57 REGWIZRD.EXE
58 VISIOHM.EXE
59 VISIOTST.EXE
71 visio32.exe
72 unVis16.exe
73 unVis32.exe
75 This is an upgrade only version of Visio. A prior version of Visio must be installed before this setup may be run.
76 CUSTOM.DIC
77 Setup couldn't create an internal temporary file on your system.
78 Please contact Visio Technical Support at 0800 132 047 (dial +353 1 7060185 if you are calling outside of The United Kingdom).
79 If you continue, Setup and/or Visio may not function properly. Do you want to continue?
80 Do you want to backup existing templates and stencils from the prior version of Visio installed on your system?
81 MSINSSTF.DLL
82 CD Setup has detected a potential conflict with your CD ROM driver. Proceeding with the installation could result in errors and an incomplete installation.
83 \n\nIf you have Visio 4.0 disks, please exit the CD Setup and proceed with an installation from disks.
84 If you do not have disks, please exit the CD Setup and copy the contents of your Visio CD ROM disk to, and start the installation from, your hard disk or network disk.
85 \n\nFor more information check the README.TXT located on your Visio CD in the INSTALL directory.\n\nContinue with Setup?
100 Visio Setup is not yet complete. Are you sure you want to exit Setup?
102 Setup has detected an existing version of Visio in the destination directory.\n\n
103 Choose OK if you want to reinstall Visio or if you want to add options to your installation.\n\n
106 If you want to install Visio to a different directory, choose Cancel and type a different destination directory at the prompt.
109 The directory you typed is invalid or incomplete.
110 Please type a full path with drive letter; for example 'c:\visio'.
112 \visio.exe
113 .OLD
114 Setup is backing up your template directory to template.old. This may take a moment or two depending on the number of templates previously installed.
115 Setup has detected that the target drive is a network drive.\n\nSelect Yes if you would like setup to switch to a shared install of Visio, then choose the View network.txt button for instructions on completing the installation.\n\n
116 Select No if you would like to continue with a regular install.\n\nSelect Cancel if you would like to change the target installation drive and/or directory.
117 SHARED
118 STENCILS
119 SETUP
120 TEMPLATE
121 ADD-ONS
122 CUSTOM
123 HELP
124 SAMPLES
125 SYSTEM
126 SAMPLES
127 FILTER
128 DRAWINGS
129 \Program Files
130 \WIN32APP
131 \Visio
132 Invalid source directory: %s\nCurrent working directory assumed.
133 STANDARD
134 TECHNCAL
135 SPELLING
136 WIZARDS
137 Template.OLD
200 readme.txt
201 notepad.exe
202 network.txt
203 extensions
204 vsd
205 winhelp.exe
206 visio.hlp
207 progref.hlp
208 Visio Help
209 Programming Reference
210 New Visio Diagram
300 setup.inf
301 Visio Administrative Setup
302 Visio Shapes Setup
303 C:\VISIO\TEMPLATE
304 Setup failed.
305 Visio Shapes have not been installed.
306 Visio has not been properly installed. You should run the setup program in its entirety at a later time to install Visio.
308 Administrative Setup succeeded.
309 .tmp
310 application
311 TemplatePath
312 Files required by Visio were in use during installation. Setup will now restart Windows to complete the installation.\n
313 Extensions
314 AddonsPath
315 Network Setup succeeded.
316 Welcome to Visio Network Setup.
317 Setup will place a shared copy of Visio into the following directory.
318 Setup will place a compressed copy of Visio into the following directory.
319 Welcome to Visio Administrative Setup.
320 setupp.inf
321 VISIO.INI
322 VISIO.BIN
323 SETUP.INI
324 Visio Network Setup
325 Visio Workstation Setup
326 Shared
400 Progman
500 DDEML.DLL
501 LZEXPAND.DLL
502 SHELL.DLL
600 K
601 Installs Visio with the most common options. Requires %s MB of disk space.
603 Installs all Visio Shapes options. This installation requires a total of %s MB of disk space.
700 Visio requires the SHARE line of your AUTOEXEC.BAT to have the following settings: \n\n SHARE /L:500 /F:5100\n\nSetup has detected that at least one of these settings is missing or too low.\n\n
701 Would you like Setup to change these settings for you?
702 Failed to open AUTOEXEC.BAT, please verify SHARE is installed with the following parameters\n\nSHARE /L:500 /F:5100\n
703 Setup failed to rename the temporary file to AUTOEXEC.BAT.\n\nSetup created a temporary file named ~VISTMP.T. Before running Visio copy ~VISTMP.T to AUTOEXEC.BAT and reboot your machine.
704 To run properly, Visio requires that SHARE is installed by your AUTOEXEC.BAT with the following parameters:\n\nSHARE /L:500 /F:5100\n\n
705 SHARE /L:500 /F:5100
706 /L:
707 /F:
708 500
709 5100
710 SHARE
711 \AUTOEXEC.BAT
712 \AUTOEXEC.VIS
713 \~VISTMP.T
714 REM
715 Please verify this line exists before running Visio.
716 Setup can make changes to your AUTOEXEC.BAT file for you. Your AUTOEXEC.BAT will be renamed AUTOEXEC.VIS.\n\n
717 REGEDIT.EXE
718 OLE2.REG
719 Setup failed to register OLE 2.0 with the registration database. OLE2.REG is located in your WINDOWS\SYSTEM directory, run Regedit and merge OLE2.REG with the registration database.
720 OLE2AUTO.REG
721 Setup failed to register OLE 2.0 Automation with the registration database. OLE2AUTO.REG is located in your WINDOWS\SYSTEM directory, run Regedit and merge OLE2AUTO.REG with the registration database.
722 VBRUN300.DLL
723 VBOA300.DLL
724 Files required to run Visio Add-ons are missing. Please run Visio setup and install Add-ons by selecting the custom install option from the Visio Install Options dialog.
725 \n\nSelect 'Yes' to continue with this shapes installation.\n\nSelect 'No' to cancel this shapes installation.
726 Setup has detected that drive '%c' is too full to install OLE system files.\n\nPlease clear an additional 1MB of disk space and run Setup again.
728 The directory '%s' is read only. Setup cannot write OLE system files.\n\nSelect 'OK' to continue with setup then refer to NETWORK.TXT for instructions on completing the installation.\n\nSelect 'Cancel' to exit setup.
729 Then select only the add-ons check box from the Visio Setup Options dialog.
730 SHAPES.DLL
731 2.00
732 This release of Visio Shapes requires a newer version of Visio than the one currently installed on your system.\n\nSelect 'OK' to complete this installation.
733 Setup has detected existing stencils or templates with the same name as files being installed. Would you like setup to save a copy of these files?\n\nSelect 'Yes' to backup existing files.\n\nSelect 'No' to overwrite existing files.
734 setup.exe
735 setupn.inf
736 setupw.inf
737 vsetup.exe
738 /s
739 Setup has detected that some system files need to be updated but are currently in use. Please contact your network administrator or refer to NETWORK.TXT for more information on updating system files.
740 \n\nSelect 'Cancel' change your installation directory and/or drive or exit setup.
741 setup.ini
742 Please wait while the Visio toolbar button is added to:\n\n%s
743 Setup may have encountered a problem while trying to add a toolbar button to the selected application(s). If you would like Setup to continue with this action select 'OK'. If you would like to skip this action select 'Cancel'.
744 Setup is having a problem adding its toolbar button to your toolbar. Please refer to the section 'Customizing your toolbar' in readme.txt.
745 The target drive selected is read-only. Please select another drive or remove read-only attribute from the selected drive.
746 Please Wait...\n\nSetup is checking your system configuration.
747 Setup will install files to %s.\n\nSelect OK to continue with the installation.\n\nSelect Cancel, then select the Change Directory... button to change the target directory.\n\nNOTE: %r
748 \protocol\StdFileEditing\server
749 ShapewareVISIO20
750 The word processor installed on your computer has a spell checker that is compatible with Visio.\n\nWould you like Visio to use your word processor's spell checker?
751 Setup will install files to %s.\n\nSelect OK to continue with the installation.\n\nNOTE: %r
752 Visio.Drawing.3
753 If you are installing from floppy disks, Setup may not require all disks for a successful installation.
800 Visio Uninstall
801 Please Wait...\n\nRemoving Program Manager icons.
802 Please Wait...\n\nRemoving File:
803 Please Wait...\n\nScanning for files.
804 Please Wait...\n\nChecking system configuration.
805 Select OK to remove Visio files from your system. This will not remove drawing files or stencil and template files that are newer than the original installation date or files located on a network drive.
806 Uninstall will also remove empty directories.\n\nSelect Cancel to cancel Uninstall. All Visio files will remain on your system.
807 Uninstall was successful.\n\nUninstall has not removed\n- Drawing (.VSD) files.\n- Files used by other Windows applications.\n- Files installed by other versions of Visio.\n- Modified Stencils and Templates.
808 Uninstall canceled.
809 Uninstall failed.
810 Uninstall has detected a copy of Visio running. Please close Visio, then restart Uninstall.
811 The shared DLL %s may no longer be needed.\n\nWould you like this file deleted (some installed programs may need this file to run)?
812 Uninstall has detected Visio is currently in use. Please select OK now and close all instances of Visio, then run Uninstall again.
813 The registry can't be accessed to add an option for uninstalling Visio. Uninstall will not available.
829 ProgramFilesDir
830 The serial number you entered is not valid for this upgrade.\nPlease check your serial number and try again.
