0	setup
1	visio
2	filters
3	template
4	samples
5	help
6	add-ons
7	custom
8	examples
9	stencils
10	system
11	vbsupport
32	drawings
33	visio16.exe
34	mscuistf.dll
35	C:\VISIO
36	Visio could not be properly installed.\n\n
37	Visio and Visio Setup require Windows 3.1, Windows 95 or Windows NT 3.51 or later.
38	You do not have enough disk space available to install 
39	Visio with all the options specified.
41	VISIOLTE
42	Visio Sampler
43	VISBETA
44	OLE libraries or Visual Basic(tm) libraries are in use. It is recommended that you choose Cancel, close all applications using OLE or Visual Basic, and then restart Setup.\n\n
45	If you choose OK, setup may need to restart Windows after installation is complete and install the required libraries.
46	/n
47	Setup initialization failed, please contact Visio Technical Support at 0800 132 047 (dial +353 1 7060185 if you are calling outside of The United Kingdom).
51	 /r
52	VISIO.EXE
53	VISTUTOR.EXE
54	SETUP.HLP
55	Setup has detected Visio is currently in use.  Please select OK now and close all instances of Visio, then run Setup again.
56	utils\shpdata.exe
57	REGWIZRD.EXE
58	VISIOHM.EXE
59	VISIOTST.EXE
71	visio32.exe
72	unVis16.exe
73	unVis32.exe
75	This is an upgrade only version of Visio.  A prior version of Visio must be installed before this setup may be run.
76	CUSTOM.DIC
77	Setup couldn't create an internal temporary file on your system.
78	Please contact Visio Technical Support at 0800 132 047 (dial +353 1 7060185 if you are calling outside of The United Kingdom).
79	If you continue, Setup and/or Visio may not function properly.  Do you want to continue?
80	Do you want to backup existing templates and stencils from the prior version of Visio installed on your system?
81	MSINSSTF.DLL
82	CD Setup has detected a potential conflict with your CD ROM driver.  Proceeding with the installation could result in errors and an incomplete installation.
83	\n\nIf you have Visio 4.0 disks, please exit the CD Setup and proceed with an installation from disks.
84	  If you do not have disks, please exit the CD Setup and copy the contents of your Visio CD ROM disk to, and start the installation from, your hard disk or network disk.
85	\n\nFor more information check the README.TXT located on your Visio CD in the INSTALL directory.\n\nContinue with Setup?
100	Visio Setup is not yet complete. Are you sure you want to exit Setup?
102	Setup has detected an existing version of Visio in the destination directory.\n\n
103	Choose OK if you want to reinstall Visio or if you want to add options to your installation.\n\n
106	If you want to install Visio to a different directory, choose Cancel and type a different destination directory at the prompt.
109	The directory you typed is invalid or incomplete. 
110	Please type a full path with drive letter; for example 'c:\visio'.
112	\visio.exe
113	.OLD
114	Setup is backing up your template directory to template.old. This may take a moment or two depending on the number of templates previously installed.
115	Setup has detected that the target drive is a network drive.\n\nSelect Yes if you would like setup to switch to a shared install of Visio, then choose the View network.txt button for instructions on completing the installation.\n\n
116	Select No if you would like to continue with a regular install.\n\nSelect Cancel if you would like to change the target installation drive and/or directory.
117	SHARED
118	STENCILS
119	SETUP
120	TEMPLATE
121	ADD-ONS
122	CUSTOM
123	HELP
124	SAMPLES
125	SYSTEM
126	SAMPLES
127	FILTER
128	DRAWINGS
129	\Program Files
130	\WIN32APP
131	\Visio
132	Invalid source directory: %s\nCurrent working directory assumed.
133	STANDARD
134	TECHNCAL
135	SPELLING
136	WIZARDS
137	Template.OLD
200	readme.txt
201	notepad.exe
202	network.txt
203	extensions
204	vsd
205	winhelp.exe
206	visio.hlp
207	progref.hlp
208	Visio Help
209	Programming Reference
210	New Visio Diagram
300	setup.inf
301	Visio Administrative Setup
302	Visio Shapes Setup
303	C:\VISIO\TEMPLATE
304	Setup failed.
305	Visio Shapes have not been installed.
306	Visio has not been properly installed. You should run the setup program in its entirety at a later time to install Visio.
308	Administrative Setup succeeded.
309	.tmp
310	application
311	TemplatePath
312	Files required by Visio were in use during installation.  Setup will now restart Windows to complete the installation.\n
313	Extensions
314	AddonsPath
315	Network Setup succeeded.
316	Welcome to Visio Network Setup.
317	Setup will place a shared copy of Visio into the following directory.
318	Setup will place a compressed copy of Visio into the following directory.
319	Welcome to Visio Administrative Setup.
320	setupp.inf
321	VISIO.INI
322	VISIO.BIN
323	SETUP.INI
324	Visio Network Setup
325	Visio Workstation Setup
326	Shared
400	Progman
500	DDEML.DLL
501	LZEXPAND.DLL
502	SHELL.DLL
600	K
601	Installs Visio with the most common options. Requires %s MB of disk space.
603	Installs all Visio Shapes options. This installation requires a total of %s MB of disk space.
700	Visio requires the SHARE line of your AUTOEXEC.BAT to have the following settings: \n\n SHARE /L:500 /F:5100\n\nSetup has detected that at least one of these settings is missing or too low.\n\n
701	Would you like Setup to change these settings for you?
702	Failed to open AUTOEXEC.BAT, please verify SHARE is installed with the following parameters\n\nSHARE /L:500 /F:5100\n
703	Setup failed to rename the temporary file to AUTOEXEC.BAT.\n\nSetup created a temporary file named ~VISTMP.T. Before running Visio copy ~VISTMP.T to AUTOEXEC.BAT and reboot your machine.
704	To run properly, Visio requires that SHARE is installed by your AUTOEXEC.BAT with the following parameters:\n\nSHARE /L:500 /F:5100\n\n
705	SHARE /L:500 /F:5100
706	/L:
707	/F:
708	500
709	5100
710	SHARE
711	\AUTOEXEC.BAT
712	\AUTOEXEC.VIS
713	\~VISTMP.T
714	REM
715	Please verify this line exists before running Visio.
716	Setup can make changes to your AUTOEXEC.BAT file for you. Your AUTOEXEC.BAT will be renamed AUTOEXEC.VIS.\n\n
717	REGEDIT.EXE
718	OLE2.REG
719	Setup failed to register OLE 2.0 with the registration database. OLE2.REG is located in your WINDOWS\SYSTEM directory, run Regedit and merge OLE2.REG with the registration database.
720	OLE2AUTO.REG
721	Setup failed to register OLE 2.0 Automation with the registration database. OLE2AUTO.REG is located in your WINDOWS\SYSTEM directory, run Regedit and merge OLE2AUTO.REG with the registration database.
722	VBRUN300.DLL
723	VBOA300.DLL
724	Files required to run Visio Add-ons are missing.  Please run Visio setup and install Add-ons by selecting the custom install option from the Visio Install Options dialog.
725	\n\nSelect 'Yes' to continue with this shapes installation.\n\nSelect 'No' to cancel this shapes installation.
726	Setup has detected that drive '%c' is too full to install OLE system files.\n\nPlease clear an additional 1MB of disk space and run Setup again. 
728	The directory '%s' is read only. Setup cannot write OLE system files.\n\nSelect 'OK' to continue with setup then refer to NETWORK.TXT for instructions on completing the installation.\n\nSelect 'Cancel' to exit setup.
729	  Then select only the add-ons check box from the Visio Setup Options dialog.
730	SHAPES.DLL
731	2.00
732	This release of Visio Shapes requires a newer version of Visio than the one currently installed on your system.\n\nSelect 'OK' to complete this installation.
733	Setup has detected existing stencils or templates with the same name as files being installed.  Would you like setup to save a copy of these files?\n\nSelect 'Yes' to backup existing files.\n\nSelect 'No' to overwrite existing files.
734	setup.exe
735	setupn.inf
736	setupw.inf
737	vsetup.exe
738	/s
739	Setup has detected that some system files need to be updated but are currently in use.  Please contact your network administrator or refer to NETWORK.TXT for more information on updating system files.
740	\n\nSelect 'Cancel' change your installation directory and/or drive or exit setup.
741	setup.ini
742	Please wait while the Visio toolbar button is added to:\n\n%s
743	Setup may have encountered a problem while trying to add a toolbar button to the selected application(s).  If you would like Setup to continue with this action select 'OK'.  If you would like to skip this action select 'Cancel'.
744	Setup is having a problem adding its toolbar button to your toolbar. Please refer to the section 'Customizing your toolbar' in readme.txt.
745	The target drive selected is read-only.  Please select another drive or remove read-only attribute from the selected drive.
746	Please Wait...\n\nSetup is checking your system configuration.
747	Setup will install files to %s.\n\nSelect OK to continue with the installation.\n\nSelect Cancel, then select the Change Directory... button to change the target directory.\n\nNOTE: %r
748	\protocol\StdFileEditing\server
749	ShapewareVISIO20
750	The word processor installed on your computer has a spell checker that is compatible with Visio.\n\nWould you like Visio to use your word processor's spell checker?
751	Setup will install files to %s.\n\nSelect OK to continue with the installation.\n\nNOTE: %r
752	Visio.Drawing.3
753	If you are installing from floppy disks, Setup may not require all disks for a successful installation.
800	Visio Uninstall
801	Please Wait...\n\nRemoving Program Manager icons.
802	Please Wait...\n\nRemoving File:  
803	Please Wait...\n\nScanning for files.
804	Please Wait...\n\nChecking system configuration.
805	Select OK to remove Visio files from your system.  This will not remove drawing files or stencil and template files that are newer than the original installation date or files located on a network drive. 
806	 Uninstall will also remove empty directories.\n\nSelect Cancel to cancel Uninstall.  All Visio files will remain on your system.
807	Uninstall was successful.\n\nUninstall has not removed\n- Drawing (.VSD) files.\n- Files used by other Windows applications.\n- Files installed by other versions of Visio.\n- Modified Stencils and Templates.
808	Uninstall canceled.
809	Uninstall failed.
810	Uninstall has detected a copy of Visio running.  Please close Visio, then restart Uninstall.
811	The shared DLL %s may no longer be needed.\n\nWould you like this file deleted (some installed programs may need this file to run)?
812	Uninstall has detected Visio is currently in use.  Please select OK now and close all instances of Visio, then run Uninstall again.
813	The registry can't be accessed to add an option for uninstalling Visio.  Uninstall will not available.
829	ProgramFilesDir
830	The serial number you entered is not valid for this upgrade.\nPlease check your serial number and try again.