1 length of parameter entity name must not exceed NAMELEN less the length of the PERO delimiter (%1)
2 length of number must not exceed NAMELEN (%1)
3 length of attribute value must not exceed LITLEN less NORMSEP (%1)
4 a name group is not allowed in a parameter entity reference in the prolog
5 an entity end in a token separator must terminate an entity referenced in the same group
6 character %1 invalid: only %2 and token separators allowed
7 a parameter separator is required after a number that is followed by a name start character
8 character %1 invalid: only %2 and parameter separators allowed
9 an entity end in a parameter separator must terminate an entity referenced in the same declaration
10 an entity end is not allowed in a token separator that does not follow a token
11 %1 is not a valid token here
12 a parameter entity reference can only occur in a group where a token could occur
13 token %1 has already occurred in this group
14 the number of tokens in a group must not exceed GRPCNT (%1)
15 an entity end in a literal must terminate an entity referenced in the same literal
16 character %1 invalid: only minimum data characters allowed
17 a parameter literal in a data tag pattern must not contain a numeric character reference to a non-SGML character
18 a parameter literal in a data tag pattern must not contain a numeric character reference to a function character
19 a name group is not allowed in a general entity reference in a start tag
20 a name group is not allowed in a general entity reference in the prolog
21 %1 is not a function name
22 %1 is not a character number in the document character set
23 parameter entity %1 not defined
24 general entity %1 not defined and no default entity
25 RNI delimiter must be followed by name start character
26 unterminated comment: found end of entity inside comment
27 comment started here
28 only one type of connector should be used in a single group
29 %1 is not a reserved name
30 %1 is not allowed as a reserved name here
31 length of interpreted minimum literal must not exceed reference LITLEN (%1)
32 length of tokenized attribute value must not exceed LITLEN less NORMSEP (%1)
33 length of system identifier must not exceed LITLEN (%1)
34 length of interpreted parameter literal must not exceed LITLEN (%1)
35 length of interpreted parameter literal in data tag pattern must not exceed DTEMPLEN
36 literal is missing closing delimiter
37 %1 invalid: only %2 and parameter separators are allowed
38 %1 invalid: only %2 and token separators are allowed
39 %1 invalid: only %2 and token separators are allowed
40 unknown declaration type %1
41 %1 declaration not allowed in DTD subset
42 character %1 not allowed in declaration subset
43 end of document in DTD subset
44 character %1 not allowed in prolog
45 end of document in prolog
46 %1 declaration not allowed in prolog
47 %1 used both a rank stem and generic identifier
48 omitted tag minimization parameter can be omitted only if "OMITTAG NO" is specified on the SGML declaration
49 element type %1 already defined
50 entity reference with no applicable DTD
51 invalid comment declaration: found %1 outside comment but inside comment declaration
52 commment declaration started here
53 %1 declaration not allowed in instance
54 non-SGML character not allowed in content
55 no current rank for rank stem %1
56 duplicate attribute definition list for notation %1
57 duplicate attribute definition list for element %1
58 entity end not allowed in end tag
59 character %1 not allowed in end tag
60 %1 invalid: only s and tagc allowed here
61 character data is not allowed here
62 document type does not allow element %1 here
63 document type does not allow element %1 here; missing one of %2 start-tag
64 document type does not allow element %1 here; assuming missing %2 start-tag
65 no start tag specified for implied empty element %1
66 end tag for %1 omitted, but its declaration does not permit this
67 start tag was here
68 end tag for %1 omitted, but OMITTAG NO was specified
69 start tag was here
70 start tag omitted for element %1 with declared content
71 end tag for %1 which is not finished
72 start tag for %1 omitted, but its declaration does not permit this
73 number of open elements exceeds TAGLVL (%1)
74 element %1 undefined
75 empty end tag but no open elements
76 %1 not finished but containing element ended
77 end tag for element %1 which is not open
78 internal parameter entity %1 cannot be CDATA or SDATA
79 character %1 not allowed in attribute specification list
80 an attribute value must be a literal unless it contains only name characters
81 entity end not allowed in attribute specification list except in attribute value literal
82 external parameter entity %1 cannot be CDATA, SDATA, NDATA or SUBDOC
83 duplicate declaration of entity %1
84 duplicate declaration of parameter entity %1
85 a reference to a PI entity is allowed only in a context where a processing instruction could occur
86 a reference to a CDATA or SDATA entity is allowed only in a context where a data character could occur
87 a reference to a subdocument entity or external data entity is allowed only in a context where a data character could occur
88 a reference to a subdocument entity or external data entity is not allowed in replaceable character data
89 the number of open entities cannot exceed ENTLVL
90 a reference to a PI entity is not allowed in replaceable character data
91 entity %1 is already open
92 short reference map %1 not defined
93 short reference map in DTD must specify associated element type
94 short reference map in document instance cannot specify associated element type
95 short reference map %1 for element %2 not defined in DTD
96 %1 is not a short reference delimiter
97 short reference delimiter %1 already mapped in this declaration
98 no document element
99 entity end not allowed in processing instruction
100 length of processing instruction must not exceed PILEN (%1)
101 missing pic delimiter
102 an attribute specification must start with a name or name token
103 %1 is not a member of a group specified for any attribute
104 the name and vi delimiter can be omitted from an attribute specification only if SHORTTAG YES is specified
105 there is no attribute %1
106 an attribute value specification must start with a literal or a name character
107 length of name token must not exceed NAMELEN (%1)
108 an attribute value literal can occur in an attribute specification list only after a vi delimiter
109 duplicate specification of attribute %1
110 duplicate definition of attribute %1
111 data attribute specification must be omitted if attribute specification list is empty
112 marked section end not in marked section declaration
113 number of open marked sections must not exceed TAGLVL (%1)
114 missing marked section end
115 marked section started here
116 entity end in character data, replaceable character data or ignored marked section
117 normalized length of attribute value literal must not exceed LITLEN (%1); length was %2
118 syntax of attribute value does not conform to declared value
119 character %1 is not allowed in the value of attribute %2
120 value of attribute %1 must be a single token
121 value of attribute %2 invalid: %1 cannot start a number token
122 value of attribute %2 invalid: %1 cannot start a name
123 non-impliable attribute %1 not specified but OMITTAG NO and SHORTTAG NO
124 required attribute %1 not specified
125 first occurrence of current attribute %1 not specified
126 %1 is not a notation name
127 %1 is not a general entity name
128 value of attribute %2 cannot be %1; must be one of %3
129 %1 is not a data or subdocument entity
130 content model is ambiguous: when no tokens have been matched, both the %2 and %3 occurrences of %1 are possible
131 content model is ambiguous: when the current token is the %2 occurrence of %1, both the %4 and %5 occurrences of %3 are possible
132 content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost containing and group has been matched, both the %4 and %5 occurrences of %3 are possible
133 content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost %3 containing and groups have been matched, both the %5 and %6 occurrences of %4 are possible
134 invalid comment declaration: found character %1 outside comment but inside comment declaration
135 comment declaration started here
136 non SGML character number %1
137 data or replaceable character data in declaration subset
138 ID %1 already defined
139 ID %1 first defined here
140 value of fixed attribute %1 not equal to default
141 character %1 is not significant in the reference concrete syntax and so cannot occur in a comment in the SGML declaration
142 minimum data of first minimum literal in SGML declaration must be "ISO 8879:1986" or "ISO 8879:1986 (ENR)" or "ISO 8879:1986 (WWW)" not %1
143 parameter before "LCNMSTRT" must be "NAMING" not %1
144 unexpected entity end in SGML declaration: only %1, S separators and comments allowed
145 %1 invalid: only %2 and parameter separators allowed
146 magnitude of %1 too big (length exceeds NAMELEN)
147 character %1 is not significant in the reference concrete syntax and so cannot occur in a literal in the SGML declaration except as the replacement of a character reference
148 %1 is not a valid syntax reference character number
149 a parameter entity reference cannot occur in an SGML declaration
150 %1 invalid: only %2 and parameter separators are allowed
151 cannot continue because of previous errors
152 SGML declaration cannot be parsed because the character set does not contain characters having the following numbers in ISO 646: %1
153 the specified character set is invalid because it does not contain the minimum data characters having the following numbers in ISO 646: %1
154 character numbers declared more than once: %1
155 character numbers should have been declared UNUSED: %1
156 character numbers missing in base set: %1
157 characters in the document character set with numbers exceeding %1 not supported
158 invalid formal public identifier %1: missing //
159 invalid formal public identifier %1: no SPACE after public text class
160 invalid formal public identifier %1: invalid public text class
161 invalid formal public identifier %1: public text language must be a name containing only upper case letters
162 invalid formal public identifer %1: public text display version not permitted with this text class
163 invalid formal public identifier %1: extra field
164 public text class of public identifier in notation identifier must be NOTATION
165 base character set %1 is unknown
166 delimiter set is ambiguous: %1 and %2 can be recognized in the same mode
167 characters with the following numbers in the syntax reference character set are significant in the concrete syntax but are not in the document character set: %1
168 there is no unique character in the document character set corresponding to character number %1 in the syntax reference character set
169 there is no unique character in the internal character set corresponding to character number %1 in the syntax reference character set
170 the character with number %1 in ISO 646 is significant but has no representation in the syntax reference character set
171 capacity set %1 is unknown
172 capacity %1 already specified
173 value of capacity %1 exceeds value of TOTALCAP
174 syntax %1 is unknown
175 UCNMSTRT must have the same number of characters as LCNMSTRT
176 UCNMCHAR must have the same number of characters as LCNMCHAR
177 number of open subdocuments exceeds quantity specified for SUBDOC parameter in SGML declaration (%1)
178 entity %1 declared SUBDOC, but SUBDOC NO specified in SGML declaration
179 a parameter entity referenced in a parameter separator must end in the same declaration
180 reference to non-existent ID %1
181 generic identifier %1 used in DTD but not defined
182 %1 not finished but document ended
183 cannot continue with subdocument because of previous errors
184 no document type declaration; will parse without validation
185 no internal or external document type declaration subset; will parse without validation
186 this is not an SGML document
187 length of start-tag before interpretation of literals must not exceed TAGLEN (%1)
188 a parameter entity referenced in a token separator must end in the same group
189 the following character numbers are shunned characters that are not significant and so should have been declared UNUSED: %1
190 there is no unique character in the specified document character set corresponding to character number %1 in ISO 646
191 length of attribute value must not exceed LITLEN less NORMSEP (-%1)
192 length of tokenized attribute value must not exceed LITLEN less NORMSEP (-%1)
193 concrete syntax scope is INSTANCE but value of %1 quantity is less than value in reference quantity set
194 public text class of formal public identifier of base character set must be CHARSET
195 public text class of formal public identifier of capacity set must be CAPACITY
196 public text class of formal public identifier of concrete syntax must be SYNTAX
197 when there is an MSOCHAR there must also be an MSICHAR
198 character number %1 in the syntax reference character set was specified as a character to be switched but is not a markup character
199 character number %1 was specified as a character to be switched but is not in the syntax reference character set
200 character numbers %1 in the document character set have been assigned the same meaning, but this is the meaning of a significant character
201 character number %1 assigned to more than one function
202 %1 is already a function name
203 characters with the following numbers in ISO 646 are significant in the concrete syntax but are not in the document character set: %1
204 general delimiter %1 consists solely of function characters
205 letters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
206 digits assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
207 character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RE
208 character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RS
209 character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is SPACE
210 separator characters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
211 character number %1 cannot be switched because it is a Digit, LC Letter or UC Letter
212 pointless for number of characters to be 0
213 %1 cannot be the replacement for a reference reserved name because it is another reference reserved name
214 %1 cannot be the replacement for a reference reserved name because it is the replacement of another reference reserved name
215 replacement for reserved name %1 already specified
216 %1 is not a valid name in the declared concrete syntax
217 %1 is not a valid short reference delimiter because it has more than one B sequence
218 %1 is not a valid short reference delimiter because it is adjacent to a character that can occur in a blank sequence
219 length of delimiter %1 exceeds NAMELEN (%2)
220 length of reserved name %1 exceeds NAMELEN (%2)
221 character numbers assigned to both LCNMCHAR or UCNMCHAR and LCNMSTRT or UCNMSTRT: %1
222 when the concrete syntax scope is INSTANCE the syntax reference character set of the declared syntax must be the same as that of the reference concrete syntax
223 end-tag minimization should be "O" for element with declared content of EMPTY
224 end-tag minimization should be "O" for element %1 because it has CONREF attribute
225 element %1 has a declared content of EMPTY and a CONREF attribute
226 element %1 has a declared content of EMPTY and a NOTATION attribute
227 declared value of data attribute cannot be ENTITY, ENTITIES, ID, IDREF, IDREFS or NOTATION
228 default value of data attribute cannot be CONREF or CURRENT
229 number of attribute names and name tokens (%1) exceeds ATTCNT (%2)
230 if the declared value is ID the default value must be IMPLIED or REQUIRED
231 the attribute definition list already declared attribute %1 as the ID attribute
232 the attribute definition list already declared attribute %1 as the NOTATION attribute
233 token %1 occurs more than once in attribute definition list
234 no attributes defined for notation %1
235 notation %1 for entity %2 undefined
236 entity %1 undefined in short reference map %2
237 notation %1 is undefined but had attribute definition
238 length of interpreted parameter literal in bracketed text plus the length of the bracketing delimiters must not exceed LITLEN (%1)
239 length of rank stem plus length of rank suffix must not exceed NAMELEN (%1)
240 document instance must start with document element
241 content model nesting level exceeds GRPLVL (%1)
242 grand total of content tokens exceeds GRPGTCNT (%1)
243 unclosed start-tag requires SHORTTAG YES
244 net-enabling start-tag requires SHORTTAG YES
245 unclosed end-tag requires SHORTTAG YES
246 DTDs other than base allowed only if CONCUR YES or EXPLICIT YES
247 end of entity other than document entity after document element
248 %1 declaration illegal after document element
249 character reference illegal after document element
250 entity reference illegal after document element
251 marked section illegal after document element
252 the %1 occurrence of %2 in the content model for %3 cannot be excluded at this point because it is contextually required
253 the %1 occurrence of %2 in the content model for %3 cannot be excluded because it is neither inherently optional nor a member of an or group
254 an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified
255 value cannot be specified both for notation attribute and content reference attribute
256 notation %1 already defined
257 short reference map %1 already defined
258 first defined here
259 general delimiter role %1 already defined
260 number of id references in start-tag must not exceed GRPCNT (%1)
261 number of entity names in attribute specification list must not exceed GRPCNT (%1)
262 normalized length of attribute specification list must not exceed ATTSPLEN (%1); length was %2
263 short reference delimiter %1 already specified
264 single character short references were already specified for character numbers: %1
265 default entity used in entity attribute %1
266 reference to entity %1 uses default entity
267 entity %1 in short reference map %2 uses default entity
268 no DTD %1 declared
269 LPD %1 has neither internal nor external subset
270 element types have different link attribute definitions
271 link set %1 already defined
272 empty result attribute specification
273 no source element type %1
274 no result element type %1
275 end of document in LPD subset
276 %1 declaration not allowed in LPD subset
277 ID link set declaration not allowed in simple link declaration subset
278 link set declaration not allowed in simple link declaration subset
279 attributes can only be defined for base document element (not %1) in simple link declaration subset
280 a short reference mapping declaration is allowed only in the base DTD
281 a short reference use declaration is allowed only in the base DTD
282 default value of link attribute cannot be CURRENT or CONREF
283 declared value of link attribute cannot be ID, IDREF, IDREFS or NOTATION
284 only fixed attributes can be defined in simple LPD
285 only one ID link set declaration allowed in an LPD subset
286 no initial link set defined for LPD %1
287 notation %1 not defined in source DTD
288 result document type in simple link specification must be implied
289 simple link requires SIMPLE YES
290 implicit link requires IMPLICIT YES
291 explicit link requires EXPLICIT YES
292 LPD not allowed before first DTD
293 DTD not allowed after an LPD
294 definition of general entity %1 is unstable
295 definition of parameter entity %1 is unstable
296 multiple link rules for ID %1 but not all have link attribute specifications
297 multiple link rules for element type %1 but not all have link attribute specifications
298 link type %1 does not have a link set %2
299 link set use declaration for simple link process
300 no link type %1
301 both document type and link type %1
302 link type %1 already defined
303 document type %1 already defined
304 link set %1 used in LPD but not defined
305 #IMPLIED already linked to result element type %1
306 number of active simple link processes exceeds quantity specified for SIMPLE parameter in SGML declaration (%1)
307 only one chain of explicit link processes can be active
308 source document type name for link type %1 must be base document type since EXPLICIT YES 1
309 one one implicit link process can be active
310 sorry, link type %1 not activated: only one implicit or explicit link process can be active (with base document type as source document type)
311 name missing after name group in entity reference
312 source document type name for link type %1 must be base document type since EXPLICIT NO
313 link process must be activated before base DTD
314 unexpected entity end while starting second pass
315 type %1 of element with ID %2 not associated element type for applicable link rule in ID link set
316 DATATAG feature not implemented
317 generic identifier specification missing after document type specification in start-tag
318 generic identifier specification missing after document type specification in end-tag
319 a net-enabling start-tag cannot include a document type specification
320 DTD did not contain element declaration for document type name
321 invalid default SGML declaration
322 reference to entity %1 for which no system identifier could be generated
323 entity was defined here
324 content model is mixed but does not allow #PCDATA everywhere
325 start or end of range must specify a single character
326 number of first character in range must not exceed number of second character in range
327 delimiter cannot be an empty string
328 too many characters assigned same meaning with minimum literal
329 earlier reference to entity %1 used default entity
330 empty start-tag
331 empty end-tag
332 unused short reference map %1
333 unused parameter entity %1
334 cannot generate system identifier for public text %1
335 cannot generate system identifier for general entity %1
336 cannot generate system identifier for parameter entity %1
337 cannot generate system identifier for document type %1
338 cannot generate system identifier for link type %1
339 cannot generate system identifier for notation %1
340 element type %1 both included and excluded
341 no document type declaration; implying %1
342 minimum data of AFDR declaration must be "ISO/IEC 10744:1997" not %1
343 AFDR declaration required before use of AFDR extensions
344 ENR extensions were used but minimum literal was not "ISO 8879:1986 (ENR)" or "ISO 8879:1986 (WWW)"
345 illegal numeric character reference to non-SGML character %1 in literal
346 cannot convert character reference to number %1 because description %2 unrecognized
347 cannot convert character reference to number %1 because character %2 from baseset %3 unknown
348 character reference to number %1 cannot be converted because of problem with internal character set
349 cannot convert character reference to number %1 because character not in internal character set
350 Web SGML adaptations were used but minimum literal was not "ISO 8879:1986 (WWW)"
351 token %1 can be value for more multiple attributes so attribute name required
352 length of hex number must not exceed NAMELEN (%1)
353 %1 is not a valid name in the declared concrete syntax
354 CDATA declared content
355 RCDATA declared content
356 inclusion
357 exclusion
358 NUMBER or NUMBERS declared value
359 NAME or NAMES declared value
360 NUTOKEN or NUTOKENS declared value
361 conref attribute
362 current attribute
363 TEMP marked section
364 included marked section in the instance
365 ignored marked section in the instance
366 RCDATA marked section
367 processing instruction entity
368 bracketed text entity
369 internal CDATA entity
370 internal SDATA entity
371 external CDATA entity
372 external SDATA entity
373 attribute definition list declaration for notation
374 rank stem
375 no system id specified
376 comment in parameter separator
377 named character reference
378 and group
379 attribute value not a literal
380 attribute name missing
381 element declaration for group of element types
382 attribute definition list declaration for group of element types
383 empty comment declaration
384 s separator in comment declaration
385 multiple comments in comment declaration
386 no status keyword
387 multiple status keywords
388 parameter entity reference in document instance
389 current attribute
390 element type minimization parameter
391 reference not terminated by refc delimiter
392 #PCDATA not first in model group
393 #PCDATA in seq group
394 #PCDATA in nested model group
395 #PCDATA in model group that does not have rep occurrence indicator
396 name group or name token group used connector other than OR
397 processing instruction does not start with name
398 s separator in status keyword specification in document instance
399 reference to external data entity
400 reference to external entity in attribute value
401 character %1 is the first character of a delimiter but occurred as data
402 SGML declaration was not implied
403 marked section in internal DTD subset
404 net-enabling start-tag not immediately followed by null end-tag
405 entity end in different element from entity reference
406 NETENABL IMMEDNET requires EMPTYNRM YES
407 reference to non-SGML character
408 declaration of default entity
409 reference to parameter entity in parameter separator in internal subset
410 reference to parameter entity in token separator in internal subset
411 reference to parameter entity in parameter literal in internal subset
412 cannot generate system identifier for SGML declaration reference
413 public text class of formal public identifier of SGML declaration must be SD
414 SGML declaration reference was used but minimum literal was not "ISO 8879:1986 (WWW)"
1000 delimiter
1002 digit
1003 name start character
1004 sepchar
1005 separator
1006 name character
1007 data character
1008 minimum data character
1009 significant character
1010 record end character
1011 record start character
1012 space character
1013 ,
1014 -
1015 parameter literal
1016 data tag group
1017 model group
1018 data tag template group
1019 name
1020 name token
1021 element token
1022 inclusions
1023 exclusions
1024 minimum literal
1025 attribute value literal
1026 system identifier
1027 number
1028 attribute value
1029 name of capacity
1030 name of general delimiter role
1031 reference reserved name
1032 name of quantity
1033 entity end
1034 short reference delimiter
2000 bad formal system identifier syntax in %1
2001 value for attribute %1 missing in formal system identifier
2002 %1 is a formal system identifier attribute value not an attribute name
2003 value of SMCRD attribute must be a single character not %1
2004 unknown BCTF %1
2005 unknown encoding %1
2006 unsupported record boundary indicator %1
2007 unsupported formal system identifier attribute %1
2008 unsupported formal system identifier attribute value %1
2009 bad value %1 for formal system identifier tracking attribute
2010 duplicate specification for formal system identifier attribute %1
2011 bad value %1 for formal system identifier zapeof attribute
2012 bad value %1 for formal system identifier search attribute
2013 bad value %1 for formal system identifier fold attribute
2014 fold attribute allowed only for neutral storage manager
2015 BCTF and encoding attributes not applicable to this storage manager
2016 cannot specify both BCTF and encoding attribute
2017 ZAPEOF attribute not applicable to this storage manager
2018 RECORDS attribute not applicable to this storage manager
2019 bad value %1 for formal system identifier indirect attribute
2020 non-minimum data character (number %1) in value of formal system identifier lookup attribute
2100 name expected
2101 literal expected
2102 name or literal expected
2103 nul character
2104 not a minimum data character
2105 end of entity in comment
2106 end of entity in literal
2107 OVERRIDE requires argument of YES or NO
2108 CATALOG entries cause loop
2109 second argument for SYSTEM entry should be quoted to avoid ambiguity
2110 no DOCUMENT entry in catalog %1
2111 no entry for public identifier %1 in catalog %2
2112 DTDDECL catalog entries are not supported
2200 error reading %1 (%2)
2201 cannot open %1 (%2)
2202 error closing %1 (%2)
2203 error seeking on %1 (%2)
2204 invalid filename %1
2205 error reading file descriptor %1 (%2)
2206 error seeking on file descriptor %1 (%2)
2207 %1 is not a valid file descriptor number
2208 cannot find %1; tried %2
2300 empty host in HTTP URL %1
2301 uncompletable relative HTTP URL %1
2302 empty port number in HTTP URL %1
2303 invalid port number in HTTP URL %1
2304 host %1 not found
2305 could not resolve host %1 (try again later)
2306 could not resolve host %1 (unrecoverable error)
2307 no address record for host name %1
2308 could not resolve host %1 (%2)
2309 could not resolve host %1 (unknown error)
2310 cannot create socket (%1)
2311 error connecting to %1 (%2)
2312 error sending request to %1 (%2)
2313 error receiving from host %1 (%2)
2314 error closing connection to host %1 (%2)
2315 invalid host number %1
2316 could not get %2 from %1 (reason given was %3)
2317 URL not supported by this version
2318 only HTTP scheme supported
2319 could not initialize Windows Sockets (%1)
2320 incompatible Windows Sockets version
2321 error number
2400 cannot open %1 (%2)
2401 "error reading %1 (%2)
2402 error seeking %1 (%2)
3000 no system identifier could be generated for meta-DTD for architecture %1
3001 element type %1 not defined in meta-DTD
3002 element %1 invalid in meta-DTD because excluded
3003 meta-DTD does not allow element %1 at this point
3004 document element must be instance of %1 element type form
3005 element %1 unfinished in meta-DTD
3006 missing substitute name
3007 substitute for non-existent architecture attribute %1
3008 substitute name for %1 already defined
3009 substitute name %1 is not the name of an attribute
3010 reference in architecture to non-existent ID %1
3011 architectural content specified with #ARCCONT not allowed by meta-DTD
3012 invalid value %1 for ArcSupr attribute
3013 no declaration for meta-DTD parameter entity %1
3014 no declaration for meta-DTD general entity %1
3015 meta-DTD entity %1 must be external
3016 no ArcDTD architecture support attribute specified
3017 ArcDataF notation %1 not defined in meta-DTD
3018 ID attribute %1 in meta-DTD not declared as ID in DTD
3019 invalid value %1 for ArcAuto architectural support attribute
3020 no notation declaration for architecture %1
3021 meta-DTD does not allow data at this point
3022 invalid value %1 for ArcIgnD attribute
3023 invalid value %1 for ArcIndr architectural support attribute
3024 unrecognized quantity name %1
3025 no value specified for quantity %1
3026 length of value %1 for quantity is too long
3027 invalid digit %1
3028 only value of nArcIndr for ArcIndr attribute supported
4000 invalid option %1
4001 missing argument for option %1
4002 usage is %1
4003 SP version %1
4004 unknown BCTF %1
4005 unknown encoding %1
4006 cannot open output file %1 (%2)
4007 cannot close output file %1 (%2)
4200 unknown warning type %1
4201 invalid error limit
4202 maximum number of errors (%1) reached; change with -E option
