0	length of name must not exceed NAMELEN (%1)
1	length of parameter entity name must not exceed NAMELEN less the length of the PERO delimiter (%1)
2	length of number must not exceed NAMELEN (%1)
3	length of attribute value must not exceed LITLEN less NORMSEP (%1)
4	a name group is not allowed in a parameter entity reference in the prolog
5	an entity end in a token separator must terminate an entity referenced in the same group
6	character %1 invalid: only %2 and token separators allowed
7	a parameter separator is required after a number that is followed by a name start character
8	character %1 invalid: only %2 and parameter separators allowed
9	an entity end in a parameter separator must terminate an entity referenced in the same declaration
10	an entity end is not allowed in a token separator that does not follow a token
11	%1 is not a valid token here
12	a parameter entity reference can only occur in a group where a token could occur
13	token %1 has already occurred in this group
14	the number of tokens in a group must not exceed GRPCNT (%1)
15	an entity end in a literal must terminate an entity referenced in the same literal
16	character %1 invalid: only minimum data characters allowed
17	a parameter literal in a data tag pattern must not contain a numeric character reference to a non-SGML character
18	a parameter literal in a data tag pattern must not contain a numeric character reference to a function character
19	a name group is not allowed in a general entity reference in a start tag
20	a name group is not allowed in a general entity reference in the prolog
21	%1 is not a function name
22	%1 is not a character number in the document character set
23	parameter entity %1 not defined
24	general entity %1 not defined and no default entity
25	RNI delimiter must be followed by name start character
26	unterminated comment: found end of entity inside comment
27	comment started here
28	only one type of connector should be used in a single group
29	%1 is not a reserved name
30	%1 is not allowed as a reserved name here
31	length of interpreted minimum literal must not exceed reference LITLEN (%1)
32	length of tokenized attribute value must not exceed LITLEN less NORMSEP (%1)
33	length of system identifier must not exceed LITLEN (%1)
34	length of interpreted parameter literal must not exceed LITLEN (%1)
35	length of interpreted parameter literal in data tag pattern must not exceed DTEMPLEN
36	literal is missing closing delimiter
37	%1 invalid: only %2 and parameter separators are allowed
38	%1 invalid: only %2 and token separators are allowed
39	%1 invalid: only %2 and token separators are allowed
40	unknown declaration type %1
41	%1 declaration not allowed in DTD subset
42	character %1 not allowed in declaration subset
43	end of document in DTD subset
44	character %1 not allowed in prolog
45	end of document in prolog
46	%1 declaration not allowed in prolog
47	%1 used both a rank stem and generic identifier
48	omitted tag minimization parameter can be omitted only if "OMITTAG NO" is specified on the SGML declaration
49	element type %1 already defined
50	entity reference with no applicable DTD
51	invalid comment declaration: found %1 outside comment but inside comment declaration
52	commment declaration started here
53	%1 declaration not allowed in instance
54	non-SGML character not allowed in content
55	no current rank for rank stem %1
56	duplicate attribute definition list for notation %1
57	duplicate attribute definition list for element %1
58	entity end not allowed in end tag
59	character %1 not allowed in end tag
60	%1 invalid: only s and tagc allowed here
61	character data is not allowed here
62	document type does not allow element %1 here
63	document type does not allow element %1 here; missing one of %2 start-tag
64	document type does not allow element %1 here; assuming missing %2 start-tag
65	no start tag specified for implied empty element %1
66	end tag for %1 omitted, but its declaration does not permit this
67	start tag was here
68	end tag for %1 omitted, but OMITTAG NO was specified
69	start tag was here
70	start tag omitted for element %1 with declared content
71	end tag for %1 which is not finished
72	start tag for %1 omitted, but its declaration does not permit this
73	number of open elements exceeds TAGLVL (%1)
74	element %1 undefined
75	empty end tag but no open elements
76	%1 not finished but containing element ended
77	end tag for element %1 which is not open
78	internal parameter entity %1 cannot be CDATA or SDATA
79	character %1 not allowed in attribute specification list
80	an attribute value must be a literal unless it contains only name characters
81	entity end not allowed in attribute specification list except in attribute value literal
82	external parameter entity %1 cannot be CDATA, SDATA, NDATA or SUBDOC
83	duplicate declaration of entity %1
84	duplicate declaration of parameter entity %1
85	a reference to a PI entity is allowed only in a context where a processing instruction could occur
86	a reference to a CDATA or SDATA entity is allowed only in a context where a data character could occur
87	a reference to a subdocument entity or external data entity is allowed only in a context where a data character could occur
88	a reference to a subdocument entity or external data entity is not allowed in replaceable character data
89	the number of open entities cannot exceed ENTLVL
90	a reference to a PI entity is not allowed in replaceable character data
91	entity %1 is already open
92	short reference map %1 not defined
93	short reference map in DTD must specify associated element type
94	short reference map in document instance cannot specify associated element type
95	short reference map %1 for element %2 not defined in DTD
96	%1 is not a short reference delimiter
97	short reference delimiter %1 already mapped in this declaration
98	no document element
99	entity end not allowed in processing instruction
100	length of processing instruction must not exceed PILEN (%1)
101	missing pic delimiter
102	an attribute specification must start with a name or name token
103	%1 is not a member of a group specified for any attribute
104	the name and vi delimiter can be omitted from an attribute specification only if SHORTTAG YES is specified
105	there is no attribute %1
106	an attribute value specification must start with a literal or a name character
107	length of name token must not exceed NAMELEN (%1)
108	an attribute value literal can occur in an attribute specification list only after a vi delimiter
109	duplicate specification of attribute %1
110	duplicate definition of attribute %1
111	data attribute specification must be omitted if attribute specification list is empty
112	marked section end not in marked section declaration
113	number of open marked sections must not exceed TAGLVL (%1)
114	missing marked section end
115	marked section started here
116	entity end in character data, replaceable character data or ignored marked section
117	normalized length of attribute value literal must not exceed LITLEN (%1); length was %2
118	syntax of attribute value does not conform to declared value
119	character %1 is not allowed in the value of attribute %2
120	value of attribute %1 must be a single token
121	value of attribute %2 invalid: %1 cannot start a number token
122	value of attribute %2 invalid: %1 cannot start a name
123	non-impliable attribute %1 not specified but OMITTAG NO and SHORTTAG NO
124	required attribute %1 not specified
125	first occurrence of current attribute %1 not specified
126	%1 is not a notation name
127	%1 is not a general entity name
128	value of attribute %2 cannot be %1; must be one of %3
129	%1 is not a data or subdocument entity
130	content model is ambiguous: when no tokens have been matched, both the %2 and %3 occurrences of %1 are possible
131	content model is ambiguous: when the current token is the %2 occurrence of %1, both the %4 and %5 occurrences of %3 are possible
132	content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost containing and group has been matched, both the %4 and %5 occurrences of %3 are possible
133	content model is ambiguous: when the current token is the %2 occurrence of %1 and the innermost %3 containing and groups have been matched, both the %5 and %6 occurrences of %4 are possible
134	invalid comment declaration: found character %1 outside comment but inside comment declaration
135	comment declaration started here
136	non SGML character number %1
137	data or replaceable character data in declaration subset
138	ID %1 already defined
139	ID %1 first defined here
140	value of fixed attribute %1 not equal to default
141	character %1 is not significant in the reference concrete syntax and so cannot occur in a comment in the SGML declaration
142	minimum data of first minimum literal in SGML declaration must be "ISO 8879:1986" or "ISO 8879:1986 (ENR)" or "ISO 8879:1986 (WWW)" not %1
143	parameter before "LCNMSTRT" must be "NAMING" not %1
144	unexpected entity end in SGML declaration: only %1, S separators and comments allowed
145	%1 invalid: only %2 and parameter separators allowed
146	magnitude of %1 too big (length exceeds NAMELEN)
147	character %1 is not significant in the reference concrete syntax and so cannot occur in a literal in the SGML declaration except as the replacement of a character reference
148	%1 is not a valid syntax reference character number
149	a parameter entity reference cannot occur in an SGML declaration
150	%1 invalid: only %2 and parameter separators are allowed
151	cannot continue because of previous errors
152	SGML declaration cannot be parsed because the character set does not contain characters having the following numbers in ISO 646: %1
153	the specified character set is invalid because it does not contain the minimum data characters having the following numbers in ISO 646: %1
154	character numbers declared more than once: %1
155	character numbers should have been declared UNUSED: %1
156	character numbers missing in base set: %1
157	characters in the document character set with numbers exceeding %1 not supported
158	invalid formal public identifier %1: missing //
159	invalid formal public identifier %1: no SPACE after public text class
160	invalid formal public identifier %1: invalid public text class
161	invalid formal public identifier %1: public text language must be a name containing only upper case letters
162	invalid formal public identifer %1: public text display version not permitted with this text class
163	invalid formal public identifier %1: extra field
164	public text class of public identifier in notation identifier must be NOTATION
165	base character set %1 is unknown
166	delimiter set is ambiguous: %1 and %2 can be recognized in the same mode
167	characters with the following numbers in the syntax reference character set are significant in the concrete syntax but are not in the document character set: %1
168	there is no unique character in the document character set corresponding to character number %1 in the syntax reference character set
169	there is no unique character in the internal character set corresponding to character number %1 in the syntax reference character set
170	the character with number %1 in ISO 646 is significant but has no representation in the syntax reference character set
171	capacity set %1 is unknown
172	capacity %1 already specified
173	value of capacity %1 exceeds value of TOTALCAP
174	syntax %1 is unknown
175	UCNMSTRT must have the same number of characters as LCNMSTRT
176	UCNMCHAR must have the same number of characters as LCNMCHAR
177	number of open subdocuments exceeds quantity specified for SUBDOC parameter in SGML declaration (%1)
178	entity %1 declared SUBDOC, but SUBDOC NO specified in SGML declaration
179	a parameter entity referenced in a parameter separator must end in the same declaration
180	reference to non-existent ID %1
181	generic identifier %1 used in DTD but not defined
182	%1 not finished but document ended
183	cannot continue with subdocument because of previous errors
184	no document type declaration; will parse without validation
185	no internal or external document type declaration subset; will parse without validation
186	this is not an SGML document
187	length of start-tag before interpretation of literals must not exceed TAGLEN (%1)
188	a parameter entity referenced in a token separator must end in the same group
189	the following character numbers are shunned characters that are not significant and so should have been declared UNUSED: %1
190	there is no unique character in the specified document character set corresponding to character number %1 in ISO 646
191	length of attribute value must not exceed LITLEN less NORMSEP (-%1)
192	length of tokenized attribute value must not exceed LITLEN less NORMSEP (-%1)
193	concrete syntax scope is INSTANCE but value of %1 quantity is less than value in reference quantity set
194	public text class of formal public identifier of base character set must be CHARSET
195	public text class of formal public identifier of capacity set must be CAPACITY
196	public text class of formal public identifier of concrete syntax must be SYNTAX
197	when there is an MSOCHAR there must also be an MSICHAR
198	character number %1 in the syntax reference character set was specified as a character to be switched but is not a markup character
199	character number %1 was specified as a character to be switched but is not in the syntax reference character set
200	character numbers %1 in the document character set have been assigned the same meaning, but this is the meaning of a significant character
201	character number %1 assigned to more than one function
202	%1 is already a function name
203	characters with the following numbers in ISO 646 are significant in the concrete syntax but are not in the document character set: %1
204	general delimiter %1 consists solely of function characters
205	letters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
206	digits assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
207	character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RE
208	character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is RS
209	character number %1 cannot be assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT because it is SPACE
210	separator characters assigned to LCNMCHAR, UCNMCHAR, LCNMSTRT or UCNMSTRT: %1
211	character number %1 cannot be switched because it is a Digit, LC Letter or UC Letter
212	pointless for number of characters to be 0
213	%1 cannot be the replacement for a reference reserved name because it is another reference reserved name
214	%1 cannot be the replacement for a reference reserved name because it is the replacement of another reference reserved name
215	replacement for reserved name %1 already specified
216	%1 is not a valid name in the declared concrete syntax
217	%1 is not a valid short reference delimiter because it has more than one B sequence
218	%1 is not a valid short reference delimiter because it is adjacent to a character that can occur in a blank sequence
219	length of delimiter %1 exceeds NAMELEN (%2)
220	length of reserved name %1 exceeds NAMELEN (%2)
221	character numbers assigned to both LCNMCHAR or UCNMCHAR and LCNMSTRT or UCNMSTRT: %1
222	when the concrete syntax scope is INSTANCE the syntax reference character set of the declared syntax must be the same as that of the reference concrete syntax
223	end-tag minimization should be "O" for element with declared content of EMPTY
224	end-tag minimization should be "O" for element %1 because it has CONREF attribute
225	element %1 has a declared content of EMPTY and a CONREF attribute
226	element %1 has a declared content of EMPTY and a NOTATION attribute
227	declared value of data attribute cannot be ENTITY, ENTITIES, ID, IDREF, IDREFS or NOTATION
228	default value of data attribute cannot be CONREF or CURRENT
229	number of attribute names and name tokens (%1) exceeds ATTCNT (%2)
230	if the declared value is ID the default value must be IMPLIED or REQUIRED
231	the attribute definition list already declared attribute %1 as the ID attribute
232	the attribute definition list already declared attribute %1 as the NOTATION attribute
233	token %1 occurs more than once in attribute definition list
234	no attributes defined for notation %1
235	notation %1 for entity %2 undefined
236	entity %1 undefined in short reference map %2
237	notation %1 is undefined but had attribute definition
238	length of interpreted parameter literal in bracketed text plus the length of the bracketing delimiters must not exceed LITLEN (%1)
239	length of rank stem plus length of rank suffix must not exceed NAMELEN (%1)
240	document instance must start with document element
241	content model nesting level exceeds GRPLVL (%1)
242	grand total of content tokens exceeds GRPGTCNT (%1)
243	unclosed start-tag requires SHORTTAG YES
244	net-enabling start-tag requires SHORTTAG YES
245	unclosed end-tag requires SHORTTAG YES
246	DTDs other than base allowed only if CONCUR YES or EXPLICIT YES
247	end of entity other than document entity after document element
248	%1 declaration illegal after document element
249	character reference illegal after document element
250	entity reference illegal after document element
251	marked section illegal after document element
252	the %1 occurrence of %2 in the content model for %3 cannot be excluded at this point because it is contextually required
253	the %1 occurrence of %2 in the content model for %3 cannot be excluded because it is neither inherently optional nor a member of an or group
254	an attribute value specification must be an attribute value literal unless SHORTTAG YES is specified
255	value cannot be specified both for notation attribute and content reference attribute
256	notation %1 already defined
257	short reference map %1 already defined
258	first defined here
259	general delimiter role %1 already defined
260	number of id references in start-tag must not exceed GRPCNT (%1)
261	number of entity names in attribute specification list must not exceed GRPCNT (%1)
262	normalized length of attribute specification list must not exceed ATTSPLEN (%1); length was %2
263	short reference delimiter %1 already specified
264	single character short references were already specified for character numbers: %1
265	default entity used in entity attribute %1
266	reference to entity %1 uses default entity 
267	entity %1 in short reference map %2 uses default entity
268	no DTD %1 declared
269	LPD %1 has neither internal nor external subset
270	element types have different link attribute definitions
271	link set %1 already defined
272	empty result attribute specification
273	no source element type %1
274	no result element type %1
275	end of document in LPD subset
276	%1 declaration not allowed in LPD subset
277	ID link set declaration not allowed in simple link declaration subset
278	link set declaration not allowed in simple link declaration subset
279	attributes can only be defined for base document element (not %1) in simple link declaration subset
280	a short reference mapping declaration is allowed only in the base DTD
281	a short reference use declaration is allowed only in the base DTD
282	default value of link attribute cannot be CURRENT or CONREF
283	declared value of link attribute cannot be ID, IDREF, IDREFS or NOTATION
284	only fixed attributes can be defined in simple LPD
285	only one ID link set declaration allowed in an LPD subset
286	no initial link set defined for LPD %1
287	notation %1 not defined in source DTD
288	result document type in simple link specification must be implied
289	simple link requires SIMPLE YES
290	implicit link requires IMPLICIT YES
291	explicit link requires EXPLICIT YES
292	LPD not allowed before first DTD
293	DTD not allowed after an LPD
294	definition of general entity %1 is unstable
295	definition of parameter entity %1 is unstable
296	multiple link rules for ID %1 but not all have link attribute specifications
297	multiple link rules for element type %1 but not all have link attribute specifications
298	link type %1 does not have a link set %2
299	link set use declaration for simple link process
300	no link type %1
301	both document type and link type %1
302	link type %1 already defined
303	document type %1 already defined
304	link set %1 used in LPD but not defined
305	#IMPLIED already linked to result element type %1
306	number of active simple link processes exceeds quantity specified for SIMPLE parameter in SGML declaration (%1)
307	only one chain of explicit link processes can be active
308	source document type name for link type %1 must be base document type since EXPLICIT YES 1
309	one one implicit link process can be active
310	sorry, link type %1 not activated: only one implicit or explicit link process can be active (with base document type as source document type)
311	name missing after name group in entity reference
312	source document type name for link type %1 must be base document type since EXPLICIT NO
313	link process must be activated before base DTD
314	unexpected entity end while starting second pass
315	type %1 of element with ID %2 not associated element type for applicable link rule in ID link set
316	DATATAG feature not implemented
317	generic identifier specification missing after document type specification in start-tag
318	generic identifier specification missing after document type specification in end-tag
319	a net-enabling start-tag cannot include a document type specification
320	DTD did not contain element declaration for document type name
321	invalid default SGML declaration
322	reference to entity %1 for which no system identifier could be generated
323	entity was defined here
324	content model is mixed but does not allow #PCDATA everywhere
325	start or end of range must specify a single character
326	number of first character in range must not exceed number of second character in range
327	delimiter cannot be an empty string
328	too many characters assigned same meaning with minimum literal
329	earlier reference to entity %1 used default entity
330	empty start-tag
331	empty end-tag
332	unused short reference map %1
333	unused parameter entity %1
334	cannot generate system identifier for public text %1
335	cannot generate system identifier for general entity %1
336	cannot generate system identifier for parameter entity %1
337	cannot generate system identifier for document type %1
338	cannot generate system identifier for link type %1
339	cannot generate system identifier for notation %1
340	element type %1 both included and excluded
341	no document type declaration; implying %1
342	minimum data of AFDR declaration must be "ISO/IEC 10744:1997" not %1
343	AFDR declaration required before use of AFDR extensions
344	ENR extensions were used but minimum literal was not "ISO 8879:1986 (ENR)" or "ISO 8879:1986 (WWW)"
345	illegal numeric character reference to non-SGML character %1 in literal
346	cannot convert character reference to number %1 because description %2 unrecognized
347	cannot convert character reference to number %1 because character %2 from baseset %3 unknown
348	character reference to number %1 cannot be converted because of problem with internal character set
349	cannot convert character reference to number %1 because character not in internal character set
350	Web SGML adaptations were used but minimum literal was not "ISO 8879:1986 (WWW)"
351	token %1 can be value for more multiple attributes so attribute name required
352	length of hex number must not exceed NAMELEN (%1)
353	%1 is not a valid name in the declared concrete syntax
354	CDATA declared content
355	RCDATA declared content
356	inclusion
357	exclusion
358	NUMBER or NUMBERS declared value
359	NAME or NAMES declared value
360	NUTOKEN or NUTOKENS declared value
361	conref attribute
362	current attribute
363	TEMP marked section
364	included marked section in the instance
365	ignored marked section in the instance
366	RCDATA marked section
367	processing instruction entity
368	bracketed text entity
369	internal CDATA entity
370	internal SDATA entity
371	external CDATA entity
372	external SDATA entity
373	attribute definition list declaration for notation
374	rank stem
375	no system id specified
376	comment in parameter separator
377	named character reference
378	and group
379	attribute value not a literal
380	attribute name missing
381	element declaration for group of element types
382	attribute definition list declaration for group of element types
383	empty comment declaration
384	s separator in comment declaration
385	multiple comments in comment declaration
386	no status keyword
387	multiple status keywords
388	parameter entity reference in document instance
389	current attribute
390	element type minimization parameter
391	reference not terminated by refc delimiter
392	#PCDATA not first in model group
393	#PCDATA in seq group
394	#PCDATA in nested model group
395	#PCDATA in model group that does not have rep occurrence indicator
396	name group or name token group used connector other than OR
397	processing instruction does not start with name
398	s separator in status keyword specification in document instance
399	reference to external data entity
400	reference to external entity in attribute value
401	character %1 is the first character of a delimiter but occurred as data
402	SGML declaration was not implied
403	marked section in internal DTD subset
404	net-enabling start-tag not immediately followed by null end-tag
405	entity end in different element from entity reference
406	NETENABL IMMEDNET requires EMPTYNRM YES
407	reference to non-SGML character
408	declaration of default entity
409	reference to parameter entity in parameter separator in internal subset
410	reference to parameter entity in token separator in internal subset
411	reference to parameter entity in parameter literal in internal subset
412	cannot generate system identifier for SGML declaration reference
413	public text class of formal public identifier of SGML declaration must be SD
414	SGML declaration reference was used but minimum literal was not "ISO 8879:1986 (WWW)"
1000	delimiter 
1002	digit
1003	name start character
1004	sepchar
1005	separator
1006	name character
1007	data character
1008	minimum data character
1009	significant character
1010	record end character
1011	record start character
1012	space character
1013	, 
1014	-
1015	parameter literal
1016	data tag group
1017	model group
1018	data tag template group
1019	name
1020	name token
1021	element token
1022	inclusions
1023	exclusions
1024	minimum literal
1025	attribute value literal
1026	system identifier
1027	number
1028	attribute value
1029	name of capacity
1030	name of general delimiter role
1031	reference reserved name
1032	name of quantity
1033	entity end
1034	short reference delimiter
2000	bad formal system identifier syntax in %1
2001	value for attribute %1 missing in formal system identifier
2002	%1 is a formal system identifier attribute value not an attribute name
2003	value of SMCRD attribute must be a single character not %1
2004	unknown BCTF %1
2005	unknown encoding %1
2006	unsupported record boundary indicator %1
2007	unsupported formal system identifier attribute %1
2008	unsupported formal system identifier attribute value %1
2009	bad value %1 for formal system identifier tracking attribute
2010	duplicate specification for formal system identifier attribute %1
2011	bad value %1 for formal system identifier zapeof attribute
2012	bad value %1 for formal system identifier search attribute
2013	bad value %1 for formal system identifier fold attribute
2014	fold attribute allowed only for neutral storage manager
2015	BCTF and encoding attributes not applicable to this storage manager
2016	cannot specify both BCTF and encoding attribute
2017	ZAPEOF attribute not applicable to this storage manager
2018	RECORDS attribute not applicable to this storage manager
2019	bad value %1 for formal system identifier indirect attribute
2020	non-minimum data character (number %1) in value of formal system identifier lookup attribute
2100	name expected
2101	literal expected
2102	name or literal expected
2103	nul character
2104	not a minimum data character
2105	end of entity in comment
2106	end of entity in literal
2107	OVERRIDE requires argument of YES or NO
2108	CATALOG entries cause loop
2109	second argument for SYSTEM entry should be quoted to avoid ambiguity
2110	no DOCUMENT entry in catalog %1
2111	no entry for public identifier %1 in catalog %2
2112	DTDDECL catalog entries are not supported
2200	error reading %1 (%2)
2201	cannot open %1 (%2)
2202	error closing %1 (%2)
2203	error seeking on %1 (%2)
2204	invalid filename %1
2205	error reading file descriptor %1 (%2)
2206	error seeking on file descriptor %1 (%2)
2207	%1 is not a valid file descriptor number
2208	cannot find %1; tried %2
2300	empty host in HTTP URL %1
2301	uncompletable relative HTTP URL %1
2302	empty port number in HTTP URL %1
2303	invalid port number in HTTP URL %1
2304	host %1 not found
2305	could not resolve host %1 (try again later)
2306	could not resolve host %1 (unrecoverable error)
2307	no address record for host name %1
2308	could not resolve host %1 (%2)
2309	could not resolve host %1 (unknown error)
2310	cannot create socket (%1)
2311	error connecting to %1 (%2)
2312	error sending request to %1 (%2)
2313	error receiving from host %1 (%2)
2314	error closing connection to host %1 (%2)
2315	invalid host number %1
2316	could not get %2 from %1 (reason given was %3)
2317	URL not supported by this version
2318	only HTTP scheme supported
2319	could not initialize Windows Sockets (%1)
2320	incompatible Windows Sockets version
2321	error number 
2400	cannot open %1 (%2)
2401	"error reading %1 (%2)
2402	error seeking %1 (%2)
3000	no system identifier could be generated for meta-DTD for architecture %1
3001	element type %1 not defined in meta-DTD
3002	element %1 invalid in meta-DTD because excluded
3003	meta-DTD does not allow element %1 at this point
3004	document element must be instance of %1 element type form
3005	element %1 unfinished in meta-DTD
3006	missing substitute name
3007	substitute for non-existent architecture attribute %1
3008	substitute name for %1 already defined
3009	substitute name %1 is not the name of an attribute
3010	reference in architecture to non-existent ID %1
3011	architectural content specified with #ARCCONT not allowed by meta-DTD
3012	invalid value %1 for ArcSupr attribute
3013	no declaration for meta-DTD parameter entity %1
3014	no declaration for meta-DTD general entity %1
3015	meta-DTD entity %1 must be external
3016	no ArcDTD architecture support attribute specified
3017	ArcDataF notation %1 not defined in meta-DTD
3018	ID attribute %1 in meta-DTD not declared as ID in DTD
3019	invalid value %1 for ArcAuto architectural support attribute
3020	no notation declaration for architecture %1
3021	meta-DTD does not allow data at this point
3022	invalid value %1 for ArcIgnD attribute
3023	invalid value %1 for ArcIndr architectural support attribute
3024	unrecognized quantity name %1
3025	no value specified for quantity %1
3026	length of value %1 for quantity is too long
3027	invalid digit %1
3028	only value of nArcIndr for ArcIndr attribute supported
4000	invalid option %1
4001	missing argument for option %1
4002	usage is %1
4003	SP version %1
4004	unknown BCTF %1
4005	unknown encoding %1
4006	cannot open output file %1 (%2)
4007	cannot close output file %1 (%2)
4200	unknown warning type %1
4201	invalid error limit
4202	maximum number of errors (%1) reached; change with -E option
5000	I
5001	W
5002	Q
5003	X
5004	E
5005	open elements
5006	In entity %1 included from %2
5007	In entity included from %2
5008	(invalid location)
5009	offset 
5100	st
5101	nd
5102	rd
5103	th
5104	(invalid argument type)
5105	(invalid message)