24544 Text File (*.txt)|*.txt|All Files (*.*)|*.*||
24545 Print Job Info Sheet
24546 Print Job Info File (*.pji)|*.pji|All Files (*.*)|*.*||
24547 High
24548 Medium
24549 Low
24550 Draft
24551 %ld dpi
24552 %ld dpi x %ld dpi
24553 (%s)
24554 %3.3f Points
24555 You are about to delete the style: %s\n\nDo you wish to proceed?
24556 Error loading %s.
24557 As in document (%s)
24558 Custom
24559 Full Page
24560 Book
24561 Booklet
24562 Tent-Card
24563 Side-Fold Card
24564 Top-Fold Card
24565 Tri-Fold Card
24566 Double Sided Full Page
24567 Ready
24568 Paused
24569 Error
24570 Pending Deletion
24571 Paper Jam
24572 Paper Out
24573 Manual Feed
24574 Paper Problem
24575 Offline
24576 I/O Active
24577 Busy
24578 Printing
24579 Output Bin Full
24580 Not Available
24581 Waiting
24582 Processing
24583 Initializing
24584 Warming Up
24585 Toner Low
24586 No Toner
24587 Page Punt
24588 User Intervention Required
24589 Out Of Memory
24590 Door Open
24591 Server Unknown
24592 ;
24593 Default printer
24594 %d documents waiting
24595 1 document waiting
24596 Don't group
24597 Refeed this stack with this sheet
24598 in the direction of the arrow.
24599 Use the smaller arrow if your printer feeds the paper along the long edge.
24601 FACE UP
24602 FACE DOWN
24603 The first side of your print job is being printed.\n\nWhen the printer is finished, follow the instructions on top of the stack of printed sheets.\n\nOnce you have done this, click Continue to print the second side.
24604 The first side of your print job is being printed.\n\nWhen the printer is finished, refeed the stack for printing on the second side. The stack should be fed %s, with the %s edge that came out of the printer facing into the paper feed.\n\nOnce you have done this, click Continue to print the second side.
24605 face up
24606 face down
24607 first
24608 last
24609 C&urrent slide
24610 C&urrent thumbnail
24611 C&urrent frame
24612 C&urrent handout
24613 Sl&ide&s:
24614 Thumbna&ils:
24615 Fr&ames:
24616 H&andouts:
24617 Style name cannot be empty.
24618 0░
24619 180░
24620 Unable to access printer driver.Try removing and reinstalling this printer driver.
24621 The style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
24622 This is the name of a built-in style that cannot be changed.
24623 Manual Double-Sided Printing
24624 Page %d
24625 Slide %d
24626 Thumbnail %d
24627 Frame %d
24628 Handout %d
24629 %3.4f x %3.4f %s
24630 %3.4f %s
24631 &Close
24632 &Options...
24633 %d%%
24634 To Page
24635 To Width
24636 To Height
24637 To Selected
24638 To Fit
24639 AaBbCcDdEeXxYyZz
24640 (Print Preview)
24641 Signature %d
24642 Front
24643 Back
24644 -
24645 Seps
24646 Composite
24647 CMYK
24648 Hexachrome
24649 &&
24650 Spot
24651 Printer:
24652 Composite
24653 (%s)
24654 Signature
24655 Side
24656 Plate
24657 Page(s)
24658 %d of %d
24659 ,
24660 Nothing is selected to be printed
24661 No plates matching the View|Plate setting are selected for printing.
24662 Width: %s Height: %s Position: (%s, %s)
24663 None
24664 ,
24665 %s Densitometer Scale
24666 No
24667 Preview of duotone separations is not supported
24668 Zoom In
24669 Zoom Out
24670 Print Previe&w
24671 Sta&ndard
24672 &Toolbox
24673 &Zoom...
24674 &Property Bar
24675 Disabled for this printer
24676 Disabled for composite
24677 Not configured for separations
24678 Print
24679 Print Options
24680 Level 1
24681 Level 2
24682 PostScript 3
24683 P&repress...
24684 N-up Format
24685 Layout Template
24686 Layout Template (Front)
24687 Layout Template (Back)
24688 Nothing is selected to be printed. Check your page range and/or color separation settings.
24689 You have requested that the name of the current signature layout be included in this print style. However, the current signature layout has not been saved.\n\nDo you wish to save the current signature layout?\n\n
24690 Choose Yes to save this signature layout now, No to continue saving this print style without the name of a signature layout, or Cancel if you do not wish to save this print style at this time.
24691 You have requested that the name of the current n-up format be included in this print style. However, the current n-up format has not been saved.\n\nDo you wish to save the current n-up format?\n\n
24692 Choose Yes to save this n-up format now, No to continue saving this print style without the name of a n-up format, or Cancel if you do not wish to save this print style at this time.
24693 Generic Profile
24694 Could not find DCS file %s, do you want to continue printing?
24695 As in document
24696 Fit to page
24697 Center of page
24698 Top center
24699 Left center
24700 Right center
24701 Bottom center
24702 Top left corner
24703 Top right corner
24704 Bottom left corner
24705 Bottom right corner
24706 Custom
24707 -
24708 Not installed
24709 Not used for grayscale output
24710 Option
24711 Setting
24712 No printers installed
24713 Do not override
24714 (Portrait)
24715 (Landscape)
24716 Tiled pages: off
24717 Tiled pages: 1
24718 Tiled pages: %d
24719 x 1
24720 x %d
24721 Selection:
24722 Page range:
24723 (%s, %s)
24724 Maximum zoom level achieved.
24725 Zoom
24726 Pick Tool
24727 Signature Layout
24728 N-up Format
24729 Marks Placement
24730 Zoom Tool
24731 x:
24732 y:
24733 %
24734 Profiles
24735 Print
24736 You cannot print more than one document simultaneously. You must either wait for the current print job to finish or cancel it.
24737 &Help
24738 Microsoft Fax Driver
24739 PUB:
24740 There are no colors available for separation. Color separations have been turned off.
24741 Blank Page Insertion
24742 When printing, do you want %s to use your left/right page settings, inserting blank pages where necessary?
24743 Blank Page
24744 Press ESC to Cancel.
24745 corelap.hlp
24746 The name may not exceed 50 characters in length.
24747 Imposition Layout
24748 Imposition Layout - Page
24749 Imposition Layout - Gutter
24750 Imposition Layout - Margins
24751 CMYK
24752 RGB
24753 Grayscale
24754 This layout is stored in a .cly file created by an incompatible Corel application.
24779 %s\nCould not locate or successfully parse the selected PPD file.\nDo you wish to select another one?
24780 %s\nCould not successfully parse the selected PPD file.
24781 ,
24782 The printer is currently unavailable.\n\nThe printer and/or server may be offline. If this is not the case, it may be necessary to reinstall the printer.
24853 {\rtf1\ansi\deff0\deftab180{\fonttbl{\f0\fswiss Arial}}{\colortbl\red0\green0\blue0;\red128\green0\blue0;}\pard\fs16 This page will list potential problems or issues that you should be aware of regarding your print job.\par\par There are no known issues with the current
24854 document or print settings. Check again just before you print this document and future print jobs.\par\par\b\cf1 Tip:\plain\fs16 You can view or change which issues are checked for by clicking on Preflight Settings, below.}
24855 Plates with same screen angle
24856 Image or marks not fitting in media's printable area
24857 Blank page(s) in document
24858 White objects set to overprint
24859 One or more white objects are set to overprint
24860 There are one or more objects with a 100% white fill or outline, for which that fill or outline has been set to overprint.
24861 You can use the Find and Replace Wizard to locate white objects. Alternatively, you can turn off all overprints set for specific objects by turning off the "Preserve document overprint settings" option under the Separations tab.
24862 Banded fountain fills
24863 One or more fountain fills may show banding
24864 The following actions can eliminate banding:
24865 Reduce the length of the fountain fill
24866 Missing DCS files
24867 One or more DCS files are not in their original location
24868 The following DCS files are missing:
24869 Documents using TrueType fonts
24870 This document uses %d TrueType font(s)
24871 This document contains the following TrueType fonts. If you are sending this file to a service bureau, they may prefer that you use Type 1 fonts.
24872 To resolve the situation use a smaller page size in your document's Page Setup or choose a larger media size in Properties (under General tab).
24873 Images rotated to an angle other than 0░, 90░, 180░ or 270░
24874 There are one or more rotated images
24875 One or more images in this document have been rotated to an angle other than 0░, 90░, 180░ or 270░.
24876 For scanned images, it is preferable to rotate the source material on the scanner, rather than by software. Rotating images in software may reduce quality and/or result in slower printing.
24877 Layout scaled down to fit media
24878 Pages have been scaled down for the layout
24879 In order to fit the number of document pages specified in the current imposition layout onto the current media size, the document pages have been scaled down.
24880 If you do not want the document pages to be scaled down, you can select a larger media size in Printer Properties. Alternatively, you can turn on the "Maintain Document Page Size" option by selecting the Imposition Layout Tool in Print Preview.
24881 Registration color is used
24882 One or more objects use the registration color
24883 Objects that are colored with the registration color will print on all plates. The registration color is intended for use when drawing your own printer's marks, and generally should not be used for any other type of object.
24884 If you want to change these objects to use CMYK black instead, you can locate them using the Find and Replace Wizard.
24885 Convert spot not applied to placed EPS files
24886 Convert spot to CMYK doesn't apply to placed EPS files
24887 You have selected the Convert Spot to CMYK option, indicating that you do not want any spot color plates to be printed. However, the document contains one or more placed EPS files.
24888 If any of these EPS files contain spot colors, you should either turn off the Convert Spot to CMYK option, or recreate these EPS files without using spot colors.
24889 You should be aware that because the contents of EPS files are never altered, any spot colors in these EPS files will not be printed.
24890 Many fonts to be downloaded to a PostScript printer
24891 There are many fonts to be downloaded to the printer
24892 The current document and print settings will cause %d fonts to be downloaded to the printer. This could overrun memory and prevent the page(s) from printing.
24893 You can do one or both of the following to reduce the number of fonts that will be downloaded:
24894 Text with texture fills (PS Level 1 only)
24895 One or more text objects contain texture fills
24896 Text objects that contain texture fills may cause limitcheck errors on Level 1 PostScript devices. This is because multiple subpaths are usually necessary in order to render text objects.
24897 Bitmaps in complex clipping paths (PS Level 1 only)
24898 There are complex lenses or powerclips containing bitmaps
24899 There is a clipping path (e.g., a Lens or PowerClip), with multiple subpaths, that contains a bitmap.\n\nBitmaps inside complex clipping paths may cause limitcheck errors on Level 1 PostScript devices.
24900 These objects should be redesigned so that only one curve, with no subpaths, exists.
24901 Texture fills in complex objects (PS Level 1 only)
24902 There are objects with multiple subpaths containing texture fills
24903 Objects comprised of multiple subpaths that contain texture fills may cause limitcheck errors on Level 1 PostScript devices.
24904 These objects should be redesigned so that only one curve, with no subpaths, exists.
24905 Complex clipping regions (PS Level 1 only)
24906 There is a lens or powerclip object that contains many nodes
24907 There is a clipping path (e.g., a Lens or PowerClip) that contains many nodes. Complex clipping paths may cause limitcheck errors on level 1 PostScript devices.
24908 It would be best to redesign such clipping paths so that they use as few nodes and subpaths as possible.
24909 Objects with outline having many nodes (PS Level 1 only)
24910 There are objects with very complex outlines
24911 Outlines with more than 500 nodes may cause limitcheck errors on Level 1 PostScript devices.
24912 It would be best to redesign such objects so that fewer nodes are necessary.
24913 Objects with outline and fill having many nodes (PS Level 1 only)
24914 There are objects with both complex fills and complex outlines
24915 Objects with more than 300 nodes that contain complex fills may cause limitcheck errors on Level 1 PostScript devices.
24916 It would be best to redesign such objects so that they use as few nodes and sub paths as possible.
24917 Output doesn't fit on media
24918 The contents of the following page(s) do not fit within the media selected in printer properties. If you continue, objects may be cropped at the edge of the media.
24919 To resolve the situation, design your document to a smaller size, choose a larger media size in Properties under the General tab, or select the Fit To Page option under the Layout tab.
24920 Printer's marks don't fit within printable area
24921 The selected printer's marks do not fit within the printable area of this device. If you continue, these marks may be partially or entirely cropped near the edge of the media.
24922 To resolve the situation use a smaller page size in your document's Page Setup, choose a larger media size in Properties (under General tab), or manually place your marks in Print Preview using the Marks Placement Tool.
24923 Output doesn't fit within printable area
24924 The contents of the following page(s) do not fit within the printable area of this device. If you continue, objects may be cropped near the edge of the media.
24925 You can use Print Preview to view exactly what will be printed.
24926 Similarly named spot colors
24927 Similarly named spot colors
24928 This document contains 1 or more spot colors that are similarly named. If you are doing color separations, these colors will output on separate plates.
24929 A minimum of 0.5" around the document trim page size is required to completely print the printer's marks.
24932 When designing with spot colors, it is best to work with the palette appropriate for the paper stock you are printing on. Try to avoid using more than one palette whenever possible.
24933 ,
24935 If you do not want these objects to be cropped, you may choose a larger media size in Properties under the General tab, select the Fit To Page option under the Layout tab
24936 , use a device that has a smaller non-printable area, or design your document so that it doesn't extend so close to the edge of the page.
24937 Several spot plates will be printed
24938 Printing this document with the current print settings will cause %d spot plates to be printed. This could prove to be very costly.
24939 If you don't want to print these colors as separate spot plates, you can do one of the following:\n1. Select "Convert spot colors to CMYK" under the Separations tab.\n2. Instead of using spot colors in your document, use the equivalent CMYK colors.
24940 Two or more color separations will print at the same screen angle
24941 The current print settings will cause the following color separations to be printed at the same angle. This could result in MoirΘ patterns or other undesirable effects.
24942 Screening angles can be changed under the Separations tab after turning on "Use advanced settings." If you are unsure of what screen angles to use, contact your service bureau or printer.
24943 %s (%f░)
24944 ,
24945 Printer's marks don't fit on media
24946 The selected printer's marks do not fit on the media selected in printer properties. If you continue, these marks may be partially or entirely cropped at the edge of the media.
24947 To resolve the situation use a smaller page size in your document's Page Setup, choose a larger media size in Properties (under General tab), or manually place your marks in Print Preview using the Marks Placement Tool.
24948 There are blank pages in the document
24949 The following page(s) of the document are entirely blank, but are selected to be printed. You may wish to double check that this is intentional.
24950 Many spot plates
24951 Increase the number of fountain steps
24952 Increase the range of color in the fill
24953 Output to a higher resolution
24954 Output using a lower screen frequency
24955 Break apart the fill into two or more objects
24956 Color correction has been enabled for non-PostScript output
24957 Color correction enabled for non-PostScript output
24958 Color output to this device will be calibrated using the currently selected composite color profile. If the driver for this device is also set to do color correction, it may happen twice which will cause inconsistant results.
24959 If you wish to use the printer driver color correction, turn off the "Apply ICC profile" option under the Misc tab.
24960 If you wish to use Corel's color correction, turn off color correction in the printer driver by choosing "Properties" under the General tab.
24961 Device independent PostScript with PostScript Level 2 or PostScript 3
24962 Level 2 PostScript has been selected for device independent PostScript
24963 Level 2 and higher PostScript files are only suitable for certain prepress workflows. If your PostScript file is going to be separated in another application it is strongly recommended that you use Level 1 PostScript.
24964 PostScript 3 has been selected for device independent PostScript
24965 Print Job Information:
24966 Application Information
24967 Filename:
24968 Application:
24969 Version:
24970 Name:
24971 Driver / Device Information
24972 Driver Name:
24973 Driver File:
24974 Resolution:
24975 Job Information
24976 Mode:
24977 Invert:
24978 Mirror:
24979 AutoFlatness:
24980 AutoSpreading:
24981 Fountain Steps:
24982 For Macintosh:
24983 Color Profile:
24984 Screen Frequency:
24985 Bleed Limit:
24986 Crop Marks:
24987 Registration Marks:
24988 File Information:
24989 Densitometer Scale:
24990 Calibration Bar:
24991 Copies:
24992 Separation Information
24993 %s:
24994 No information entered
24995 Flatness:
24996 Maximum Spread:
24997 Text Above:
24998 Font(s)
24999 Font(s) Required
25000 Font(s) Supplied
25001 OPI Linked Images
25002 None
25003 Yes
25004 No
25005 On
25006 Off
25007 Separations
25008 No
25009 Yes
25010 No
25011 Yes
25012 See Separation Information
25013 degrees
25014 lpi
25015 UNKNOWN
25016 Landscape
25017 Portrait
25018 N/A
25019 Do not know where to output the sheet.\n Go into Info Settings and specify a destination\n
25020 Printer Default
25021 PostScript Level:
25022 Bitmap Color Space:
25023 Auto Increase Fountain Steps:
25024 Optimize Fountain fills:
25025 RGB
25026 CMYK
25027 Page Numbers:
25028 Client Information
25029 Client Name:
25030 Company Name:
25031 Mailing Address:
25032 Phone Number:
25033 Fax Number:
25034 Email Address:
25035 Job Name:
25036 Job Comments:
25037
25038 Print to File:
25039 Fixed Spread:
25040 Grayscale
25041 Page Size:
25042 Slide Size:
25043 Thumbnail Size:
25044 Frame Size:
25045 Handout Size:
25046 Page Orientation:
25047 Slide Orientation:
25048 Thumbnail Orientation:
25049 Frame Orientation:
25050 Handout Orientation:
25051 at
25052 :
25053 (Continued)
25054 Imposition Layout:
25055 Preserve Document Overprints:
25056 Rasterize Entire Page:
25057 On - Single File
25058 On - Chapters to Separate Files
25059 On - Pages to Separate Files
25060 On - Plates to Separate Files
25061 PPD Device Name:
25062 Using PPD file
25063 Device independent PostScript file
25064 Using operating system's printer driver
25065 Output Method:
25066 Color Bitmap Downsampling:
25067 Grayscale Bitmap Downsampling:
25068 Monochrome Bitmap Downsampling:
25069 Preview Image Default:
25070 Off At Startup
25071 On At Startup
25072 Bitmap Font Limit (PS):
25073 Bitmap Font Size Threshold (PS):
25074 Overprint Black Threshold (PS):
25075 PostScript 2 Stroke Adjust (PS):
25076 Off
25077 On
25078 Page Orientation Prompt:
25079 Off - Always match orientation
25080 On - Ask if orientations differ
25081 Composite Crop Marks (PS):
25082 Output in Black Only
25083 Output in CMYK
25084 Bitmap Chunk Overlap Pixels:
25085 Default To Fast Mode
25086 Bitmap Output Threshold (K):
25087 Many Fonts (Preflight):
25088 Preview Color Default:
25089 Auto (Simulate Output)
25090 Color
25091 Grayscale
25092 Preview Separations Default:
25093 Auto (Simulate Output)
25094 Composite
25095 Off
25096 On
25097 NT Double Download Workaround (PS):
25098 Off
25099 On
25100 NT Bookman Download Workaround (PS):
25101 Render to Bitmap Resolution:
25102 Automatic
25103 150 dpi
25104 200 dpi
25105 250 dpi
25106 300 dpi
25107 350 dpi
25108 400 dpi
25109 450 dpi
25110 500 dpi
25111 550 dpi
25112 600 dpi
25113 Off - Don't change orientation
25114 Spot Color Separations Warning:
25115 If any spot colors are used
25116 If more than 1 spot colors used
25117 If more than 2 spot colors used
25118 If more than 3 spot colors used
25119 Send Large Bitmaps in Chunks:
25120 No
25121 Yes, if larger than threshold
25122 The print style:\n\n %s\n\nalready exists. Do you wish to update it with new settings?
25123 You are about to delete the print style: %s\n\nDo you wish to proceed?
25124 %s Defaults
25125 Custom (Current settings not saved)
25126 Job Information Sheet Settings
25127 Advanced Separations Settings
25128 Layout Settings
25129 Separations Settings
25130 Prepress Settings
25131 Miscellaneous Settings
25132 Proofing and Color Settings
25133 PostScript Settings
25134 Auto Trapping Settings
25135 Center Page
25136 Fit to Page
25137 Maintain Aspect Ratio
25138 Print Tiled Pages
25139 Imposition Layout
25140 N-up Format
25141 Tile Overlap
25142 Print Separations
25143 Print Separations in Color
25144 Convert Spot Colors to CMYK
25145 Print Empty Plates
25146 Print File Information
25147 Position File Info Within Page
25148 Print Crop Marks
25149 Exterior Crop Marks Only
25150 Print Registration Marks
25151 Color Calibration Bar
25152 Densitometer Scales
25153 Invert
25154 Mirror
25155 Print Job Information Sheet
25156 Always Overprint Black
25157 Auto Spreading
25158 Auto Spread Maximum
25159 Auto Spread Text
25160 Fountain Steps
25161 Width Scale Factor
25162 Height Scale Factor
25163 Job Info Sheet Contents
25164 Job Info Sheet Location
25165 Bleed Amount
25166 Print Vectors
25167 Print Bitmaps
25168 Print Text
25169 Print All Text in Black
25170 All Colors Black
25171 Fit Marks and Layout to Page
25172 Maximum Points per Curve
25173 Curve Flatness
25174 Auto Increase Flatness
25176 Download Type 1 Fonts
25177 Convert True Type to Type 1
25178 PostScript Level
25179 Auto Increase Fountain Steps
25180 Optimize Fountain Fills
25182 Maintain OPI Links
25183 Print Page Numbers
25184 Screening
25185 Halftone Type
25186 Hexachrome Plates
25187 Apply Settings to All Pages
25188 Screen Frequency
25189 High Solid Ink Density
25190 Densitometer Densities
25191 Job Name / Slug Line
25192 Bounding Box
25193 Use JPEG Compression
25194 JPEG Quality Factor
25197 Resolve External Bitmaps
25198 Limit Bleed
25199 Fixed Auto Spreading
25200 Image Position Preset
25201 All Colors Grayscale
25202 Print Pictures & Graphics
25203 Print Hidden Pictures
25204 Use Advanced Settings
25205 Screening Settings
25206 Resolution
25207 Basic Screen
25208 Marks Alignment Rectangle
25209 Auto-Position Marks Rectangle
25210 Application Information
25211 Driver Information
25212 Font Information
25213 Links Information
25214 Job Information
25215 Separations Information
25216 Send to Text File
25217 Sent to Printer
25218 Text File Name
25219 Print File Name
25220 Print Driver Name
25221 Print Device Name
25222 Apply Default To All Pages
25223 Include Hyperlinks
25224 Include Notes
25225 Include Outlines
25226 On Start Display
25227 Output Color Bitmaps As
25228 Preserve Document Overprints
25229 Prepare For Service Bureau Wizard
25230 %s is currently gathering linked image files used by your document.
25231 %s is currently assembling information about your document.
25232 %s is currently creating a %s file.
25233 The gathering of files for your service bureau was not completed.
25234 \n\nIf you wish to change any of your previous settings or try again, click Back. Click Cancel if you wish to exit the Prepare For Service Bureau Wizard.
25235 UserName
25236 CompanyName
25237 MailingAddress
25238 PhoneNumber
25239 FaxNumber
25240 EmailAddress
25241 PrepareForServiceBureauWizard
25242 Corel Service Bureau Profiles (*.csp)
25243 Browse Service Bureau Profiles
25244 Choose Location
25245 Folder (*.*)
25246 The location you specified could not be found or created.\n\nClick back to select another location.
25247 (%s)
25248 To change color calibration to use this profile, choose 'Set Profiles' and change the %s profile. When you are finished, click Next to continue.
25249 composite
25250 separations
25251 The gathering of files for your service bureau was not completed. The following files were not created:
25252 \n
25253 \n
25254 %s x %s %s
25255 (%s)
25256 The service bureau has requested the use of color calibration.\n\nYou do not have color management installed with %s. You must exit %s to install the color management component. Please save your work before exiting.\n\nPress cancel to exit this wizard and then run Setup from %s CD #1. Choose the Custom option and select Color Management in the Graphics Utilities section.
25257 The service bureau requests that the following color profile be used as the %s printer profile:
25258 Unable to find the file:\n\n %s\n\nDo you wish to continue gathering files, omitting this file?
25259 The folder where files are being gathered to already contains a file named:\n\n %s\n\nDo you wish to replace this file?
25260 You have cancelled the gathering of files for your service bureau.
25261 Font Name
25262 Filename
25263 Fonts.TXT
25264 Below is a list of the fonts used by %s.\n\nFont Name Path\n----------------------------------------------------------------------------\n
25265 %-35.35s %s\n
25266 ,
25267 Links.TXT
25268 Below is a list of externally linked images used by %s.\n\n
25269 %s\n
25270 Your document's page size is too large for the largest physical page size supported by this service bureau. The document page size selected in page setup must be no larger than %s. \n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to select a different profile.
25271 The selected service bureau profile is not intended for use with this version of %s. Using this profile may not produce the results requested by the service bureau.\n\nDo you wish to proceed using this profile?
25272 Download profile from Internet...
25273 This service bureau profile was created for %s, and cannot be used with %s.\n\nClick Back to select a different profile, or click Cancel to exit the Prepare For Service Bureau Wizard.
25274 Any
25275 The service bureau has requested that you set the printer page size to %s.
25276 Your document page size set in page setup is %s.
25277 This is the minimum printer page size that may be used to print your document.
25278 To allow for any printer's marks outside this area, the minimum printer page size that may be used to print your document is %s.
25279 JobInfo.TXT
25280 %s is currently copying fonts used by your document.
25281 The service bureau has requested that the PostScript file conform to the DSC standard. To ensure DSC compliance, drag your PostScript file onto the Corel DSC Utility.
25282 <Your PostScript File>
25283 The Wizard could not find the file(s) corresponding to the following font(s):%s\n\nChoose Next to continue without them, or Cancel to interrupt the file copy.
25288 The Service Bureau has specified that the following color profile should be used. However, this file was not found in the same location as the .CSP file from your Service Bureau.\nClick on the Browse button to locate this file.
25289 The Service Bureau has specified that the following .PPD file should be used. However, this file was not found in the same location as the .CSP file from your Service Bureau.\nClick on the Browse button to locate this file.
25290 (None selected)
25291 Profiles
25292 Using the PPD %s, the smallest page size required to print your document is %s.
25293 The maximum page size supported by the service bureau is %s.
25294 Click cancel to go back to your document and choose a smaller page size.
25295 The PPD file %s does not support the fixed page size suggested by the service bureau (%s). Please contact your service bureau for further assistance.
25296 The PPD file %s does not support custom page sizes, and your document page is too large to fit in any of the fixed page sizes available.
25297 The maximum page size supported by this PPD is %s.
25298 In order to fit on a custom page created using the PPD file %s either the width or the height of your document page should be less than %s.
25299 Printer paper orientation does not match one or more document pages.\n\nAdjust printer automatically?
25300 %s is currently printing your document to a .PRN file.
25301 Your document's page size is too large for the current physical page size. The document page size selected in page setup must be small enough to fit within the physical page selected in printer properties, while still leaving a %s %s margin on all sides.\n\nClick Cancel if you wish to return to your document to adjust its page size, or click Back to change the page size in printer properties.
25302 The largest printer page size supported by the service bureau is %s.\n\nIn Printer Properties, choose a printer page size that is within this range.
25303 Neutral Density
25304 Order
25305 Type
25306 Neutral Density
25307 Transparent
25308 Opaque
25309 Opaque Ignore
25310 Neutral Density
25311 Spread
25312 Choke
25313 Centerline
25315 This file is an original manufacturer's PPD file.\nYou cannot replace this file. Please select a new file name.
25316 This file is currently being used by this application.\nYou cannot replace this file. Please select a new file name.
25317 %s already exists.\nDo you want to replace it?
25318 Change '%s' Setting
25319 Your current selection is conflicting with the following item:\n\nItem: %s\nSelection: %s\n\nDo you want to ignore the conflict?
25320 In-RIP Separations:
25321 Trap Width:
25322 Black Trap Width:
25323 Step Limit:
25324 Black Color Limit:
25325 Black Density Limit:
25326 Sliding Trap Limit:
25327 Color Scaling:
25328 Image Trap Placement:
25329 Trap Objects to Images:
25330 Internal Image Trapping:
25331 Trap Black and White Images:
25332 Neutral Density
25333 Type
25334 In-RIP Separations
25335 In-RIP Trapping
25336 Use In-RIP Trapping
25337 Ink Settings
25338 Trap Width
25339 Black Trap Width
25340 Color Scaling
25341 Step Limit
25342 Black Color Limit
25343 Black Density Limit
25344 Sliding Trap Limit
25345 Image Trap Placement
25346 Trap Objects to Images
25347 Internal Image Trapping
25348 Trap BW Images
25349 In-RIP Trapping Information
25350 In-RIP Trapping Information
25351 points
25352 The location specified already contains file(s) or directories. If you do not want to send these existing file(s) or directories to the service bureau, it is suggested that another location be selected for the service bureau files.\n
25353 \nClick Back to specify a different location, or Next to use the current location.
25354 Marks to objects
25355 Tiling marks
25356 Current printer
25357 Print To File
25358 Page Range
25359 Other Page Range
25360 Even & Odd Page Settings
25361 Number Of Copies
25362 General Settings
25363 Collate
25364 Rasterize Entire page
25365 Rasterize Page Resolution
25366 Color Settings
25367 Printing
25368 Image resolution too low
25369 Image resolution below %d DPI
25370 The current document contains one or more images below %d DPI, and may not be suitable for certain processes.
25371 Output will contain RGB Bitmaps
25372 The resulting output will contain RGB Bitmaps
25373 When this file is printed, it will contain RGB bitmaps. This may not be suitable for PostScript printers.
25374 Output will contain CMYK Bitmaps
25375 The resulting output will contain CMYK Bitmaps
25376 When this file is printed, it will contain CMYK bitmaps. This may not be suitable for non-PostScript printers.
25377 Output will contain RGB vector objects
25378 The resulting output will contain RGB vector objects
25379 When this file is printed, it will contain RGB vector objects. This may not be suitable for PostScript printers.
25380 Output will contain CMYK vector objects
25381 The resulting output will contain CMYK vector objects
25382 When this file is printed, it will contain CMYK vector objects. This may not be suitable for non-PostScript printers.
25383 Small fonts
25384 Font size below %d pts in document.
25385 This document contains one or more fonts smaller than %d pts. This font may be unreadable when reproduced.
25386 Edit Basic Settings
25387 Edit Page Placements
25388 Edit Gutters & Finishing
25389 Edit Margins
25390 Perfect Binding
25391 Saddle Stitch
25392 Collate & Cut
25393 Custom Binding
25394 Page
25395 Frame
25396 Pages
25397 Frames
25398 Document
25399 Movie
25400 Documents
25401 Movies
25402 x
25403 RGB color profile selected for PostScript output
25404 An RGB color profile has been selected for PostScript output
25405 All PostScript output is done in the CMYK color space. Using an RGB profile will cause insconsistent results.
25406 Select a valid CMYK profile for your device.
25407 Layout
25408 Normal
25409 Main
25410 File
25411 View
25412 Settings
25413 Help
25414 Preview Color
25415 Preview Separations
25416 Print Preview Shortcut Keys
25417 Shortcut Keys
25418 Duplexing Instruction Sheet
25419 Image Position (X Value)
25420 Image Position (Y Value)
25421 Small Fonts (Preflight):
25422 Image Resolution Too Low (Preflight):
25423 Record %d
25424 No Non-PostScript Printers
25425 WebLinks.txt
25426 Corel on the Web
25427 Preview
25428 Normal Mode
25429 Edit Layout Mode
25430 If the DCS links are not resolved the low resolution preview will be used instead. In order to select the missing files, use the Link Manager Docker.
25431 One or more printers are currently unavailable.\n\nThe printers and/or servers may be offline. If this is not the case, it may be necessary to reinstall the printers.
25432 Even Pages
25433 Odd Pages
25511 Corel Manual Double-Sided Printing Wizard
25512 Welcome to the Corel Manual Double-Sided Printing Wizard.
25513 Click "Next", to begin.
25514 Do you want to enable or disable manual double-sided printing?
25515 Enable
25516 Disable
25517 Select the printer for which you want to enable manual duplex printing :
25518 This printer is already set up. Reconfigure?
25519 This printer is not yet configured for manual duplexing.
25520 Manual double-sided printing will be disabled for this printer :
25521 Click "Finish"
25522 When you click "Next", a test page will be printed on the printer you have selected.
25523 Leave it on the output tray and follow the instructions on the screen.
25524 Reinsert the test page into your printer FACE UP, the arrow pointing in the direction of the paper feed. Use the smaller arrow if your printer feeds paper along the edge.
25525 Look at your printout. Is the printed side face up?
25526 No, it is face down.
25527 Yes, it is face up.
25528 Reinsert the test page with the printed side face up, and the arrow pointing in the direction that the paper will feed into the printer.
25529 Click "Next", to continue.
25530 Remove the test page from the printer. Does it have printing on both sides?
25531 Yes, it has printing on both sides.
25532 No, it has printing on one side only.
25533 What number is in the square box in the corner of the test page? ( See image A )
25534 What number is on the reverse side of the test page, in the same corner as the square box? ( See image B )\n\nIf you're unsure, fold the corner of the test page that has the square box. Turn the test page over. What number is in the folded corner?
25535 The number
25536 The wizard now has all the information it needs to help you print your double-sided projects correctly.
25537 Click "Finish", to continue.
25538 Select the printer for which you want to disable manual duplex printing :
25539 No printer is available or installed on this system.
25540 The printer name is invalid.\n\nWizard execution aborted.
25541 Corel - Test page #1
25542 Corel - Test page #2
25544 You must have write privilege to perform this operation.
56069 LP=Opens the search dialog box, which searchs for help on a specific topicCT=&Help Topics...
56071 LP=Displays copyright and program informationCT=About
56072 LP=Controls where the contents of one or more document pages will be placed on each sheet of paperCT=&Layout...
56073 LP=Controls prepress settings, including printer's marksCT=P&repress...
56074 LP=Controls color separation settingsCT=&Separations...
56075 LP=Controls miscellaneous printing options, such as proofing options and print qualityCT=Miscellaneous &Options...
