home *** CD-ROM | disk | FTP | other *** search
Wrap
# The contents of this file are subject to the Netscape Public # License Version 1.1 (the "License"); you may not use this file # except in compliance with the License. You may obtain a copy of # the License at http://www.mozilla.org/NPL/ # # Software distributed under the License is distributed on an "AS # IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or # implied. See the License for the specific language governing # rights and limitations under the License. # # The Original Code is mozilla.org code. # # The Initial Developer of the Original Code is Netscape # Communications Corporation. Portions created by Netscape are # Copyright (C) 1998 Netscape Communications Corporation. All # Rights Reserved. # # Contributor(s): # # # The following are used by libmime to emit header display in HTML # # Out of memory ## @name MIME_OUT_OF_MEMORY ## @loc None -1000=Application is out of memory. # Can't open a temp file ## @name MIME_UNABLE_TO_OPEN_TMP_FILE ## @loc None # LOCALIZATION NOTE (-1001): Do not translate "\n%.200s.\n\n" below. It will display the name of the temporary directory -1001=Unable to open the temporary file\n%.200s.\n\n\Check your `Temporary Directory' setting and try again. # Can't write temp file ## @name MIME_ERROR_WRITING_FILE ## @loc None -1002=Error writing temporary file. # Mail subject ## @name MIME_MHTML_SUBJECT ## @loc None 1000=Subject # Resent-Comments ## @name MIME_MHTML_RESENT_COMMENTS ## @loc 1001=Resent-Comments # Resent-Date ## @name MIME_MHTML_RESENT_DATE ## @loc 1002=Resent-Date # Resent-Sender ## @name MIME_MHTML_RESENT_SENDER ## @loc 1003=Resent-Sender # Resent-From ## @name MIME_MHTML_RESENT_FROM ## @loc 1004=Resent-From # Resent-To ## @name MIME_MHTML_RESENT_TO ## @loc 1005=Resent-To # Resent-CC ## @name MIME_MHTML_RESENT_CC ## @loc # LOCALIZATION NOTE (1006): Do not translate "CC" below. 1006=Resent-CC # Date ## @name MIME_MHTML_DATE ## @loc 1007=Date # Sender ## @name MIME_MHTML_SENDER ## @loc 1008=Sender # From ## @name MIME_MHTML_FROM ## @loc 1009=From # Reply-To ## @name MIME_MHTML_REPLY_TO ## @loc 1010=Reply-To # Organization ## @name MIME_MHTML_ORGANIZATION ## @loc 1011=Organization # To ## @name MIME_MHTML_TO ## @loc 1012=To # CC ## @name MIME_MHTML_CC ## @loc # LOCALIZATION NOTE (1013): Do not translate "CC" below. 1013=CC # Newsgroups ## @name MIME_MHTML_NEWSGROUPS ## @loc 1014=Newsgroups # Followup-To ## @name MIME_MHTML_FOLLOWUP_TO ## @loc 1015=Followup-To # References ## @name MIME_MHTML_REFERENCES ## @loc 1016=References # Name ## @name MIME_MHTML_NAME ## @loc 1017=Name # Type ## @name MIME_MHTML_TYPE ## @loc 1018=Type # Encoding ## @name MIME_MHTML_ENCODING ## @loc 1019=Encoding # Description ## @name MIME_MHTML_DESCRIPTION ## @loc 1020=Description # Message ID ## @name MIME_MHTML_MESSAGE_ID ## @loc 1021=Message-ID # Resent Message ID ## @name MIME_MHTML_RESENT_MESSAGE_ID ## @loc 1022=Resent-Message-ID # BCC ## @name MIME_MHTML_BCC ## @loc 1023=BCC # Download Status ## @name MIME_MHTML_DOWNLOAD_STATUS_HEADER ## @loc 1024=Download Status # Download status not downloaded ## @name MIME_MHTML_DOWNLOAD_STATUS_NOT_DOWNLOADED ## @loc 1025=Not Downloaded Inline # Link to doc ## @name MIME_MSG_LINK_TO_DOCUMENT ## @loc 1026=Link to Document # Get Doc info ## @name MIME_MSG_DOCUMENT_INFO ## @loc 1027=<B>Document Info:</B> # Msg Attachment ## @name MIME_MSG_ATTACHMENT ## @loc 1028=Attachment # Forwarded Msg Attachment ## @name MIME_FORWARDED_MESSAGE_ATTACHMENT ## @loc # LOCALIZATION NOTE (1029): DONT_TRANSLATE. 1029=forward.msg # Mouseover text ## @name MIME_MSG_ADDBOOK_MOUSEOVER_TEXT ## @loc # LOCALIZATION NOTE (1030): Do not translate "%s" below. Place "%s" where you wish to appear a name to be # added to the address book. 1030=Add %s to your Address Book # XSender Internal ## @name MIME_MSG_XSENDER_INTERNAL ## @loc # LOCALIZATION NOTE (1031): Only translate the word "Internal in the line below". 1031=<B><FONT COLOR=\042#808080\042> Internal</FONT></B> # User wrote ## @name MIME_MSG_X_USER_WROTE ## @loc # LOCALIZATION NOTE (1032): Do not translate "%s" below. # Place the first %s where you wish the name of the message to appear # Place the second %s where you wish the name of the user to appear # Do not translate "<P>" 1032=In message %s %s wrote:<P> # Msg user wrote ## @name MIME_MSG_USER_WROTE ## @loc # LOCALIZATION NOTE (1033): Do not translate "%s" below. # Place the %s where you wish the name of the user to appear # Do not translate "<P>" 1033=%s wrote:<P> # No Headers ## @name MIME_MSG_NO_HEADERS ## @loc 1034=(no headers) # No Headers ## @name MIME_MSG_SHOW_ATTACHMENT_PANE ## @loc 1035=Toggle Attachment Pane # Part not downloaded ## @name MIME_MSG_NOT_DOWNLOADED ## @loc 1036=(Not Downloaded) # Partial Message Format 1 ## @name MIME_MSG_PARTIAL_FMT_1 ## @loc # LOCALIZATION NOTE (1037): In the following line, translate only the word, "Truncated!". 1037=<P><CENTER><TABLE BORDER CELLSPACING=5 CELLPADDING=10 WIDTH="80%%"><TR><TD ALIGN=CENTER><FONT SIZE="+1"><B>Truncated!</B></FONT><HR> # Partial Message Format 2 ## @name MIME_MSG_PARTIAL_FMT_2 ## @loc # LOCALIZATION NOTE (1038): Translate the following two lines as a single sentence. In the middle of the two sections # there will be a URL. You may translate the text in any order you wish, but the html tags must stay in the same locations. # In particular, the "<B>" tag must begin the first section, which must end with the "<A HREF=" tag. Do not translate the html tag,"<P>" 1038=<B>This message exceeded the Maximum Message Size set in Account Settings, so we have only downloaded the first few lines from the mail server.<P>Click <A HREF=" # Partial Message Format 3 ## @name MIME_MSG_PARTIAL_FMT_3 ## @loc # LOCALIZATION NOTE (1039): This section must begin with the ">" sign and end with the tags,"</B></TD></TR></TABLE></CENTER>" # Do not translate "</A>" tag. 1039=">here</A> to download the rest of the message.</B></TD></TR></TABLE></CENTER> # default attachment name ## @name MIME_MSG_DEFAULT_ATTACHMENT_NAME ## @loc # LOCALIZATION NOTE (1040): Do not translate "%s" below. # Place the %s where you wish the part number of the attachment to appear 1040=Part %s # default forwarded message prefix ## @name MIME_FORWARDED_MESSAGE_USER_WROTE ## @loc 1041=-------- Original Message -------- # Partial Message Format2 1 ## @name MIME_MSG_PARTIAL_FMT2_1 ## @loc # LOCALIZATION NOTE (1037): In the following line, translate only the words, "Not Downloaded". 1042=<P><CENTER><TABLE BORDER CELLSPACING=5 CELLPADDING=10 WIDTH="80%%"><TR><TD ALIGN=CENTER><FONT SIZE="+1"><B>Not Downloaded</B></FONT><HR> # Partial Message Format2 2 ## @name MIME_MSG_PARTIAL_FMT2_2 ## @loc # LOCALIZATION NOTE (1038): Translate the following two lines as a single sentence. In the middle of the two sections # there will be a URL. You may translate the text in any order you wish, but the html tags must stay in the same locations. # In particular, the "<B>" tag must begin the first section, which must end with the "<A HREF=" tag. Do not translate the html tag,"<P>" 1043=<B>Only the headers for this message were downloaded from the mail server.<P>Click <A HREF=" # Partial Message Format2 3 ## @name MIME_MSG_PARTIAL_FMT_3 ## @loc # LOCALIZATION NOTE (1039): This section must begin with the ">" sign and end with the tags,"</B></TD></TR></TABLE></CENTER>" # Do not translate "</A>" tag. 1044=">here</A> to download the rest of the message.</B></TD></TR></TABLE></CENTER>