home *** CD-ROM | disk | FTP | other *** search
- Title: Lost HardWare Interrupts
-
- Bulletin Date: 4/1/90 Revision 1.0
-
- Category: Config Sub-Category: Server
- S/W Product: v3.0 NWMAC H/W Product:
- Version Affected: 3.0
-
- Operating System: NW v3.11 Rev:
- System and Hardware:
- Application:
-
- Symptom: Error messages are generated about lost hardware interrupts.
-
- Problem: There are two possible causes for this problem. If the
- server is a 486 system, there is a documented problem with
- lost hardware interrupts with the 486 chip. If the server
- is a 386 system and is using the NE/2 or NE2000 LAN driver,
- there is a timing problem between the LAN driver and the
- NetWare OS.
-
- Solution or
- Workaround: There is no apparent operational side effect to this
- problem, so you can ignore these messages. If they are
- generated frequently, you can instruct the system to stop
- displaying the messages by using this SET command line:
- SET Display Lost Interrupt Alerts = OFF
-
-