home *** CD-ROM | disk | FTP | other *** search
- AST RESEARCH, INC. TECHNICAL BULLETIN TB-0310 9-25-87
-
-
- PREMIUM/286 WITH DESQVIEW 2.0
-
-
- Quarterdeck's DESQview 2.0 manual states that the motherboard memory
- of the personal computer should be set to the lowest possible
- amount. Then memory from an EEMS-type board should be used to fill-
- in the memory up to 640K.
-
- Because the FASTRAM card's memory can all be accessed as EEMS
- memory, AST recommends configuring the FASTRAM card as follows to
- get optimum performance from DESQview 2.0:
-
-
- Amount of Memory
- Installed on the Configure the To Run DESQview
- FASTRAM Card Memory As Use the Command
- ---------------- -------------- ---------------
-
- 512KB 512K Base "DV"
-
-
- 1024KB (and greater) 640 Base With the program
- +128 Extended "QEXT.SYS"
- ----- installed in the
- Total 768 Linear CONFIG.SYS
- (Remainder will file use "XDV" to
- by default be start DESQview
- expanded).
- based system.
-
-
- FLOPPY BASE