home *** CD-ROM | disk | FTP | other *** search
- .ND
- .TL
- Unimate Controller Real Time Operation Set up
- .IP 1
- Log on, put the machine in real time mode if necessary, for this type :
- .DS L
- $ /rt780/multidown
- .DE
- and wait 15 minutes.
- .PP
- current admissible down times are :
- .DS L
- 10:00 - 11:00 a.m
- 2:00 - 3:30 p.m
- 6:00 - 7:30 p.m
- .DE
- .IP 2
- Flip switch to M.
- .IP 3
- Power up the controller.
- .IP 4
- Break whatever is running in there.
- .IP 5
- Flip switch to C
- .IP 6
- Type :
- .DS L
- $ dl moper
- .DE
- .IP 7
- When asked, flip switch to D
- .IP 8
- Wait for the message : ">ok"
- .IP 9
- If it fails to appear, go to step 4
- .IP 10
- Flip switch to C, for calibrating the arm, type :
- .DS L
- $ calib
- .DE
- .IP 11
- If it does not work, flip switch to M, type :
- .DS L
- 2000G
- .DE
- goto step 10
- .IP 12
- Have fun.
- .IP 13
- Bring the machine up if necessary, for this type :
- .DS L
- $ /rt780/multiup
- .DE
- .SH
- Crashs
- .PP
- Use 'sync' lavishly before any crash.
- .PP
- If the machine fails to reboot by itself, go to the console.
- .PP
- If you do not have the prompt :
- .DS L
- >>>
- .DE
- type ^P.
- .PP
- Once you have it, type :
- .DS L
- H
- U
- I
- B HPM
- .DE
- goto step 1
- .sp 6
- .SH
- CAUTION
- .PP
- The Sturgeon General has determined
- that this room can cause terminal deseases.
-