Groovy Bytes: Behind the Moon/groovybytes.iso/GROOVY/DISKMAGS/ZOMB695.ZIP/BEIGE.ZOM

Text File | 1995-04-05 | 6.6 KB | 135 lines

──── The Beige Box

        Have you ever wanted a lineman's handset?  Surely every phreak
has at least once considered the phun that he could have with one.
After searching unlocked phone company trucks for one for months, we
had an idea.  We could build one.  We did, and named it the "Beige Box,"
simply because that is the color of ours.  In the following file we
will give complete instructions for the construction and use of a
Beige Box.

        The construction is very simple.  First, you must understand
the concept of the device.  In a modular jack, there are four wires.
These are red, green, yellow, and black.  For a single line telephone,
however, only two matter: the red (ring) and green (tip).  The yellow
and black are not necessary for this project.  A lineman's handset
only has two clips on it: the ring and the tip.

        You will need a phone (we reccommend a touch-tone) with a
modular plug, a modular jack, and two large alligator clips
(preferably red and green, respectively).  Take the modular jack and
look at the bottom of its casing.  There should be a grey jack with
four wires (red, green, yellow, and black) leading out of it.  To the
end of the red wire attach a red alligator clip.  To the end of the
green wire attach a green alligator clip.  The yellow and black wires
can be removed, although I would only set them aside so that you can
use the modular jack in future projects.  Now insert your telephone's
modular plug into the molular jack.

        This particular model is nice because it can be easily made,
is inexpensive, uses common parts that are readily available, is
small, is lightweight, and does not require the destruction of a
phone.

        There are many uses for the Beige Box.  However, before you
can use it, you must know how to attach it to its output device.  This
device can be any of several Bell switching apparatus that include
terminal sets (i.e., remote switching centers, bridging heads, cans,
etc.).  To open most Bell Telephone switching apparatus, you must
have a 7/16 inch hex driver.  This piece of equipment can be picked
up at your local hardware store.  With your 7/16 hex driver, turn the
security bolt(s) approximately 1/8 of an inch counter-clockwise and
open.  If your output device is locked, then you must have some
knowledge of destroying and/or picking locks.  However, we have never
encountered a locked output device.  Once you have opened your output
device, you should see a mass of wires connected to terminals.  On
most of your output devices, the terminals should be labeled "T" (Tip
-- if not labeled, it is usually on the left) and "R" (Ring -- if not
labeled, it ks usually on the right).  Remember: Ring - red -  right.
The "Three R's" (ack, lame name :) which is a simple way to remember which is
which.

        Now you must attach the red alligator clip (ring) to the
"R" (ring) terminal.  Attach the green alliagtor clip (tip) to the
"T" (tip) terminal.  NOTE: If instead of a dial tone you hear nothing,
re-adjust the alligator clips so that they are not touching each other
or other terminals.  Also make sure that they are firmly attached.
By this time you should hear a dial tone.  Dial ANI and find out the
number that you are using (you wouldn't want to use your own).

        Here are some practical applications:
                o  Eavesdropping
                o  Long distance, static-free phone calls to phriends
                o  Dialing direct to Alliance Conferencing (also static-
                   free)
                o  Phucking people over
                o  Bothering the operator at little risk to yourself
                o  Blue Boxing with a greatly reduced chance of getting
                   caught
                o  Anything at all that you want, since you are an
                   extension on that line

Listening in on other Calls
        To be most effective, first attach the Beige Box and then your
phone.  This eliminates static caused by connecting the box, therefore
reducing the potential suspicion of your victim.  When eavesdropping,
it is always best to be neither seen nor heard.  If you hear someone
dialing out, do not panic; but rather hang up, wait, and pick up the
receiver again.  The person will either have hung up or tried to
complete their call again.  If the latter is true, then listen in, and
perhaps you will find information worthy of blackmail!  If you would
like to know who you are listening to, after dialing ANI, pull a CN/A
on the number.


Dialing Long Distance
        This section is self-explanatory, but don't forget to dial a
"1" before the NPA.


Dialing Direct to Alliance Conferencing
        Simply dial 0-700-456-1000 and you will get instructions from
there.  I prefer this method over PBXs, since PBXs are more difficult to come
by and figure out. (Logic sucks)

Phucking People Over
        This is a very large topic for discussion.  Just by using the
other functions described, you can create a large phone bill for the
person (they will not have to pay it, but it is a hassle for them).
In addition, since you are an extension of the person's line, leave
your phone off hook, and they will not be able to make or recieve
calls.  This can be extremely nasty because no one would suspect the
cause of the problem.


Bothering the Operator
        This is also self-explanatory and can provide hours of
entertainment.  Simply ask or say things to her that are offensive and
you would not like traced to your line.  This also corresponds with the
previous described section, Phucking People Over.  After all, guess
who's line it gets traced to?

Blue Boxing
        See a file on Blue Boxing for more details.  This is an
especially nice feature if you live in an ESS-equipped prefix, since
the calls are, once again, not traced to your line.



POTENTIAL RISKS OF BEIGE BOXING

        Overuse of the Beige Box may cause suspicions within the Gestapo,
and result in legal problems.  Therefore, I would recommend that you:

        o  Use more than one output device
        o  Choose a secluded spot to do your Beige Boxing
        o  Keep a low profile (i.e., do not post under your real name
           on a public BBS concerning your accomplishments)
        o  In order to make sure that the enemy has not been inside your
           ouput device, I reccomend that you place a piece of
           transparent tape over the opening of your output device.
           Therefore, if it is opened in your absence, the tape will be
           displaced and you will be aware of the fact that someone has
           been intruding upon your territory.