home *** CD-ROM | disk | FTP | other *** search
- Mwave Support 2.22 for OS/2 on IBM Thinkpads
-
- Revised 01/29/96
- by Jim Wilkerson
-
- This procedure is for the Mwave version 2.22 drivers on the IBM Thinkpad
- 755CE/CD/CsE/CV/CDV/CX and 760C/CD/E/ED series machines. It is designed to
- work as is for all versions of OS/2 Warp 3.x and 4.x.
-
- Note: Mwave 2.22 is not supported with any version of OS/2 2.1x.
-
- The files listed in this procedure are available from the IBM PC Company BBS at
- phone: (919) 517-0001, anonymous ftp: ftp.pcco.ibm.com, and World Wide Web
- site: http://www.pcco.ibm.com.
-
-
- Note: The actual file descriptions listed here may vary from the descriptions
- as posted on the BBS, the ftp site, and the WEB. The file name, size,
- and date should be exact.
-
- The Thinkpad should be placed on AC power and logged off of any network
- connections prior to beginning the Mwave installation. Failure to do so can
- cause various inconsistencies in the Mwave installation which will prevent
- Mwave from functioning normally. After successful installation, the Thinkpad
- can be run as it was before.
-
- Obtain the files from IBM as shown in the following table for the version of
- OS/2 and model of Thinkpad being used. Place the files into a temporary
- directory, run each and follow the instructions to create the diskettes as
- listed.
-
- Ü└└└└└└└└└└└└ü└└└└└└└└└└ü└└└└└└└└└ü└└└└└└└└└└ü└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└æ
- ⌐File Name ⌐ Notes ⌐File Size⌐File Date ⌐ Description ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐SYTPE144.EXE⌐ - ⌐ 373097 ⌐ 12/04/96 ⌐System Update Disk v1.44 ⌐
- ⌐ ⌐ ⌐ ⌐ ⌐755CE/CsE/CD/CDV/CV/CX ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐SYTPF124.EXE⌐ - ⌐ 408435 ⌐ 12/04/96 ⌐System Update Disk v1.24 - ⌐
- ⌐ ⌐ ⌐ ⌐ ⌐TP 760C and L Series ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐SYTPG106.EXE⌐ - ⌐ 772762 ⌐ 01/28/97 ⌐System Update Disk v1.06 - ⌐
- ⌐ ⌐ ⌐ ⌐ ⌐TP 760E Series, except ⌐
- 9546-U9A and 9546-U9B (XGA Models)
-
- ëSYTPH101.EXEñ└└└└-└└└└└ñ└└449573└ñ└12/19/96└ñSystem└Update└Disk└v1.01└760E/EDå
- 9546-U9A and 9546-U9B (XGA Models)
-
- ⌐UTTPG101.EXE⌐ 755 only ⌐ 1034113 ⌐ 12/13/96 ⌐Utility Disk 1 v3.32 - Thinkpad ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐UTTPG201.EXE⌐ 755 only ⌐ 319910 ⌐ 12/13/96 ⌐Utility Disk 2 v3.32 - Thinkpad ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐UTTPGOS2.EXE⌐ 760 Only ⌐ 1084417 ⌐ 10/31/96 ⌐Utility Disk OS/2 Thinkpad ⌐
- ⌐ ⌐ ⌐ ⌐ ⌐365X/XD, 560, 760 all ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐UTTPGDOS.EXE⌐ 760 (1) ⌐ 394200 ⌐ 10/31/96 ⌐Utility Disk DOS Thinkpad ⌐
- ⌐ ⌐ ⌐ ⌐ ⌐365X/XD, 560, 760 all ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWO222-1.EXE⌐ - ⌐ 1255418 ⌐ 10/18/96 ⌐Thinkpad Mwave for OS/2 Disk 1 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWO222-2.EXE⌐ - ⌐ 1245430 ⌐ 10/18/96 ⌐Thinkpad Mwave for OS/2 Disk 2 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWAUDOS2.EXE⌐ - ⌐ 176666 ⌐ 10/18/96 ⌐Thinkpad Mwave Audio OS/2 Warp ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWW222-1.EXE⌐ - ⌐ 1294806 ⌐ 10/18/96 ⌐Thinkpad Mwave Windows Disk 1 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWW222-2.EXE⌐ - ⌐ 1372273 ⌐ 10/18/96 ⌐Thinkpad Mwave Windows Disk 2 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWW222-3.EXE⌐ - ⌐ 1151806 ⌐ 10/18/96 ⌐Thinkpad Mwave Windows Disk 3 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDIO1.EXE⌐ - ⌐ 408140 ⌐ 10/17/96 ⌐Thinkpad Mwave OS/2 MIDI Support⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDIW1.EXE⌐ - ⌐ 355852 ⌐ 10/17/96 ⌐Thinkpad Mwave Windows MIDI Supp⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDI-2.EXE⌐ - ⌐ 1381470 ⌐ 10/17/96 ⌐TP Mwave MIDI Samples Disk 2 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDI-3.EXE⌐ - ⌐ 1381216 ⌐ 10/17/96 ⌐TP Mwave MIDI Samples Disk 3 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDI-4.EXE⌐ - ⌐ 1331687 ⌐ 10/17/96 ⌐TP Mwave MIDI Samples Disk 4 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDI-5.EXE⌐ - ⌐ 1358728 ⌐ 10/17/96 ⌐TP Mwave MIDI Samples Disk 5 ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└ñ└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWMIDI-6.EXE⌐ - ⌐ 560187 ⌐ 10/17/96 ⌐TP Mwave MIDI Samples Disk 6 ⌐
- ç└└└└└└└└└└└└ê└└└└└└└└└└ê└└└└└└└└└ê└└└└└└└└└└ê└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└â
-
- Notes
-
- 1. Utility Disk for DOS - Thinkpad 760 is only needed if Thinkpad
- Personalization is desired during Thinkpad features installation.
-
-
- *** System Update Disk ***
-
- Consult the README file on the System Update disk for the respective system
- being used and follow the instructions for use.
-
-
- *** Base Multimedia Support ***
-
- If Multimedia Software support was not installed during the installation of
- OS/2 Warp, then use Selective Install to install the support. The hardware
- selection on the System Configuration page should be 'None'. For the Thinkpad
- 755CD/CDV and 760CD/ED series, CD-ROM support must be present (i.e. support
- should have been installed when OS/2 was installed) in the machine during the
- install of Multimedia support in order to get a CD Audio object in the
- Multimedia folder. Perform a proper shut down and reboot the system.
-
- Note: If the customer has attempted to install the Multimedia support with a
- sound device or if multiple Digital Audio or other icons appear in the
- Multimedia folder, then Multimedia support must be removed completely
- and reinstalled. Use Selective Uninstall in the System Setup folder to
- remove Multimedia support.
-
-
- *** Thinkpad Features and Mwave Management Device Driver Installation ***
-
- Note: If Thinkpad Features for OS/2 have already been installed from base OS/2
- installation, then Step 1 may be skipped.
-
- 1. Install the Thinkpad Features for OS/2 using the INSTALL2 program from
- either the Utility diskette 1 v3.32 (755 Series) or the Utility Disk OS/2
- (760 Series). The INSTALL2 program can be run from an OS/2 window. Remove
- the check on the Install Personalization Editor, select Install, and
- follow the instructions to complete the installation.
-
- 2. Go into Device Driver Install from System Setup, insert either the Utility
- diskette 2 v3.32 (755 Series) or the Utility Disk OS/2 (760 Series),
- select Install and choose the Thinkpad System Management Device Driver
- (make sure to HIGHLIGHT this selection). Perform a proper shut down and
- reboot the system. Verify that the line:
-
- BASEDEV=AODBSMD.SYS
-
- is placed in the CONFIG.SYS. This driver MUST be present in order for
- Mwave to function. For best results, this line should come before the
- Mwave lines in CONFIG.SYS as shown in the sample CONFIG.SYS on the
- following page.
-
-
- *** OS/2 Mwave Support ***
-
- Install Mwave support by using the SETUP command from the Thinkpad Mwave OS/2
- Disk 1 in an OS/2 window. After the second disk is read, there should be a
- confirmation message: 'OS/2 Mwave Manager Operating System Installed'. Perform
- a proper shut down and reboot.
-
- During boot up, there should be a message 'MWAVEDD.SYS (v2.125B)' and an icon
- should appear on the Desktop titled "Mwave for OS/2."
-
-
- *** OS/2 Mwave Audio Support ***
-
- For OS/2 Warp, install Mwave Audio support (not including MIDI), by using the
- SETUP command from the Thinkpad Mwave Audio for OS/2 Warp disk in an OS/2
- window. Select the IBM Mwave Adapter (this is the default). Perform a proper
- shut down and reboot the system.
-
-
- *** OS/2 Mwave MIDI Support ***
-
- For Mwave MIDI support, run the SETUP command from the Thinkpad OS/2 MIDI
- Support Disk from an OS/2 window. For OS/2 for Windows packages (Red Label),
- answer 'Yes' to the 'Do you want your Windows MIDI Synthesizer to use this set
- of MIDI Samples' prompt. For all versions of OS/2 Warp, answer 'Yes' to the
- to the prompts for OS/2 MIDI samples. When the program asks for 'Disk 2',
- insert Thinkpad MIDI Samples Disk 2. For 'Disk 3' use MIDI Samples Disk 3 and
- so on through all five of the MIDI samples diskettes.
-
- Note: If OS/2 Warp is installed on a different partition from DOS/Windows, AND
- OS/2 Warp Blue Label is being used, answer 'No' to the prompt for the
- Windows MIDI samples if no updates to the Native DOS/Windows side are
- desired.
-
- The OS/2 CONFIG.SYS should reflect the following changes:
-
- .
- .
- .
- REM ***********************************************************
- REM Note: The Mwave MWAVEVDD.SYS device driver MUST be loaded *
- REM before the VEMM.SYS OS/2 driver in the CONFIG.SYS. *
- REM ***********************************************************
- DEVICE=C:\MWAVEOS2\BIN\mwaveVDD.sys
- .
- .
-
- DEVICE=C:\MWAVEOS2\BIN\mwbd0400.sys BUS=1150000
- (This line will usually be near the COM.SYS driver.)
-
- .
- .
- SET MMBASE=C:\MMOS2;
- SET DSPPATH=C:\MMOS2\DSP;
- SET NCDEBUG=4000
- DEVICE=C:\MMOS2\SSMDD.SYS
- DEVICE=C:\MMOS2\R0STUB.SYS
-
- BASEDEV=AODBSMD.SYS
-
- SET MWFT_PATHNAME=C:\MWAVEOS2\DSP
- SET MWPATH=C:\MWAVEOS2\MWAVEOS;C:\MWAVEOS2\DSP;C:\MMOS2\MWAVE
- SET MWCARD=THINKPAD
- SET MWROOT=C:\MWAVEOS2
- SET MWOSNAME=MWOS2780.DSP
- SET MWBIOS=MWBI0401.DSP
- DEVICE=C:\MWAVEOS2\BIN\MWAGWVDD.SYS
- DEVICE=C:\MWAVEOS2\BIN\MWIOVDD.SYS
- DEVICE=C:\MWAVEOS2\BIN\MWAVEDD.SYS
- DEVICE=C:\MWAVEOS2\BIN\MEIO0430.SYS
- RUN=C:\MWAVEOS2\BIN\MWSTART.EXE
- .
- .
- .
-
- Note that these changes should be in the order shown with the only exception
- as noted for the Mwave device to function properly.
-
-
- *** Reinstallation of Mwave ***
-
- If the Mwave installation becomes damaged and fails to function properly, it
- will be necessary to fully remove all Mwave AND Multimedia support prior to
- reinstallation. This is necessary to insure a clean reinstall of all features.
-
- For OS/2 Warp:
-
- - Edit the CONFIG.SYS and remove all references to \MWAVEOS2.
- - Do a Selective Uninstall of Multimedia support and delete the Multimedia
- and Mwave folders from the Desktop.
- - Shutdown and reboot the system.
- - Use the Drives object to remove the \MMOS2 and \MWAVEOS2 subdirectories.
- - Proceed with the installation as outlined above.
-
- WINOS2 Mwave support can be reinstalled independently of OS/2 support, i.e. if
- OS/2 Mwave support is working correctly, then it is not necessary to
- remove/reinstall OS/2 support in order to reinstall WINOS2 support. In
- general, WINOS2 Mwave support does not need to be removed before it is
- reinstalled.
-
-
- *** Miscellaneous Application Considerations ***
-
- For FaxWorks for OS/2, the modem should be set up as a Class 2 device.
-
- For HyperACCESS, the modem type should be set up as an 'Mwave Windsurfer Comm
- Adapter' or 'Mwave 28,800 bps Modem' on whichever port (COM1 or COM2 only) that
- the modem is set for.
-
- For communications programs that do not have a specific selection for the
- Mwave modem, choose a Hayes compatible.
-
- For the modem to function with OS/2 telecommunications/fax programs, it must
- be initialized with the Mwave Modem icon in the Mwave for OS/2 folder. The
- Discriminator function will also launch. Both Modem and Discriminator will not
- be visible on the Desktop, but will show up in the Window List and can be
- switched to if necessary.
-
- For IBM LAN Distance to function properly, edit the PROTOCOL.INI file and add
- PCMCIA=YES to the [COMx] stanza. If the modem fails to connect successfully to
- the LAN Distance server at high speed (19200 to 28800), then it will be
- necessary to set the modem speed to 14400 for proper operation.
-
- For successful coexistence with IBM TCP/IP, IBM LAN Requestor and/or Netware
- Requestor for OS/2; all of the MMOS2 and Mwave drivers, with the exception of
- the MWAVEVDD.SYS driver, should come after the TCP/IP lines in the CONFIG.SYS
- file.
-
- For CD audio on the 755CD/CDV and 760CD/ED to function, the Auxiliary Control
- must be running from the Mwave for OS/2 folder. This is not necessary if the
- CD is set for Digital Transfer.
-
- If Audio is playing and an incoming telephone signal is detected by the modem,
- then the Mwave Manager will terminate the Audio automatically to free up the
- the necessary Mwave resources for the Discriminator/Modem. Audio should
- resume after the Modem is through with its process (telephone, FAX, or Modem).
-
- It is possible to use a PCMCIA modem and the DSP modem at the same time. For
- best results, install OS/2 with the Infrared enabled as COM1, Serial disabled,
- and the DSP modem at COM2 (defaults). Use the Thinkpad Features to disable
- Infrared and Serial. Install PCMCIA support and select PCMCIA Modem/FAX as
- the device. The PCMCIA modem will show up as COM1 to applications. It is not
- possible to use the Serial ports or the Infrared in this configuration due to
- interrupt conflicts.
-
-
- *** WINOS2 Mwave Support ***
-
- For OS/2 Warp for Windows (Red label):
-
- Reboot the system back into native DOS, start Windows and run the SETUP
- program on the Thinkpad Mwave for Windows Disk 1. Follow the instructions
- and install all three disks. Restart Windows for the changes to take effect.
-
- For all other versions of OS/2 Warp 3.x and 4.x:
-
- Run the SETUP program on the Thinkpad Mwave for Windows Disk 1 and follow
- the instructions. Make sure to run the SETUP program from a WINOS2 Full
- Screen session for best results.
-
- The following two lines should be added/appended in the AUTOEXEC.BAT in the
- root of the bootable drive:
-
- SET BLASTER=A220 I5 D1 T1
- SET PATH=...C:\MWAVEOS2\BIN;C:\MWW\DLL;
-
-
- Note: If it becomes necessary to use Selective Install to reinstall WINOS2
- support, these two lines will need to be manually added back to the
- AUTOEXEC.BAT for Mwave to function in WINOS2 sessions.
-
- For MIDI support on all versions of OS/2 Warp, run the SETUP program on the
- Thinkpad Mwave Windows MIDI Support Disk. Select 'Complete MIDI Sample
- Install'. The specified path should be the same as used for the OS/2
- MIDI samples installed in the previous steps, this is:
-
- C:\MWAVE\SAMPLES\MIDIFULL
-
- by default. Answer 'Yes' to the prompts to have the OS2 and WIN-OS2 Mwave
- MIDI Synthesizers to use this set of MIDI Samples. If MIDI samples were
- installed under OS/2, then select 'Cancel' when prompted for MIDI Samples
- Disk 2. Otherwise, when the program asks for 'Disk 2', insert Thinkpad MIDI
- Samples Disk 1. For 'Disk 3' use MIDI Samples Disk 2 and so on through all
- five MIDI samples diskettes.
-
- The first use of MIDI from the Media Player will give a warning 'This file may
- not play correctly with the default MIDI setup'. Check the 'Don't display
- this warning in the future' box and continue.
-
- For WINOS2 sessions, the modem will function reliably with telecommunications
- programs only. The FaxWorks for Windows (Callcenter) will work reliably under
- WINOS2. FaxWorks for OS/2 included in the Bonus Pak for OS/2 Warp works fine
- with WINOS2 applications for faxing. FaxWorks PRO for OS/2 also works.
-
-
- *** Other Mwave Fixes and Utilities ***
-
- The following is a list and description other Mwave fixes and enhancements
- that are available from the IBM PC Company BBS and other vendors.
-
-
-
-
- Ü└└└└└└└└└└└└ü└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└æ
- ⌐File Name ⌐Description ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐FWVMW058.EXE⌐Updated FaxWorks Callcenter for Windows. ⌐
- ⌐ ⌐Necessary for full function with Mwave. ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWAVERAS.EXE⌐Updated MODEM.INF for RAS and WFWG. ⌐
- ⌐ ⌐For version 1.10 and 2.x Mwave. ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MWVOD100.EXE⌐Upgrade to allow Voice Over Data ⌐
- ⌐ ⌐capability. For version 2.x Mwave only. ⌐
- ë└└└└└└└└└└└└ñ└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└å
- ⌐MDM.ZIP ⌐Fix for Lotus modem aware applications ⌐
- ⌐ ⌐and the Mwave Modem. For v2.x Mwave. ⌐
- ⌐ ⌐Available from Lotus BBS at 415-691-0401. ⌐
- ç└└└└└└└└└└└└ê└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└└â
-
-
-