Adjust the color of the film.
 |
For most, "Simple Color Correction" should be adequate when the film color needs to be adjusted.
The brightness, contrast, gamma, reds and blues and call be adjusted.
-[MPEG Settings], [Advanced]
- Scroll Bar
- Use the scroll bar to select where in the film to preview the filter effects.
Brightness- Sets the brightness mask intensity. Valid values are between -255 and 255. A value of 0 does not change the brightness from the original.
Contrast- Sets the contrast mask intensity. Valid values are between -255 and 255. A value of 0 does not change the contrast from the original.
Gamma- Sets the gamma correction between the colors. Valid values are between -255 and 255. A value of 0 does no correction.
Gamma correcting brings out the difference between the color, and therefore can produce a better brightening of the film contents than the by changing the "Brightness." This correction produces a more natural looking brightness.
Red- Sets the red intensity. Valid values are between -255 and 255.
Blue- Sets the blue intensity. Valid values are between -255 and 255.
Enable Filter- Apply the filter to the preview frame.
"Default" Button- Return all of the settings to the defaults.
"OK" Button- Close the window and save the new settings.
"Cancel" Button- Close the window and discard any changes.