This is a guide to setting up the PPP Control Panel for connecting to Madasafish.
The PPP Control Panel is a component of Open Transport/PPP. You must have Open Transport installed to install and configure PPP.

Please note that the PPP Control Panel has been replaced by the Remote Access Control Panel in MacOS 8.5 and higher.

To start go to the Apple Menu (top left of screen), select Control Panels then PPP. You should see the screen below.

If your telephone system requires a prefix to get an outside line, please enter it before the 0845.
Enter an X in the Save Password box to prevent you from re-enting the password each time you wish to connect.

You will also have to specify your Modem type. Select PPP at the top of the window then Modem.
The following screen will appear.

In most cases, the modem is connected to the Modem Port.
Consult your modem handbook if the correct manufacturer or model cannot be found from the list.

Close the window and choose to Save the changes.

Back in the PPP Control Panel, click Connect and your modem will dial. When connected click on your browser icon to start surfing the web.