Connecting the USB Hub to a G4 System (Macintosh Only)
The USB hub explained in this section converts one USB port at the rear of the G4 system into seven USB ports. The USB hub kit (see USB Hub) contains a USB hub, a power adapter, and a USB cable.
  The USB hub shown in the example might not be the actual USB hub you use. However, the example shown provides enough information to allow you to properly connect whatever USB hub you decide to use.
  The USB hub is supported only when it is powered by an ac converter.

The USB hub has the following rear connections:
  USB ports 1 through 7
  Device connection
  On/Off switch
  Power connection
To connect the USB hub (see USB Hub) to the G4 system:
1.  Connect the power adapter to the USB hub:
–   Plug the dc connector of the power adapter into the power connection at the rear of the USB hub.
–   Plug the ac connector of the power adapter into a wall outlet or power strip.
2.  Connect the USB hub to the G4 system using the USB cable:
–   Plug the device connector of the USB cable into the device connection at the rear of the USB hub.
–   Plug the USB connector of the USB cable into one of the USB ports at the rear of the G4 system.
3.  Turn the power switch to the On position.

Some features described in Help are available only in Avid Xpress Pro or Avid Xpress DV. For more information about Avid Free DV go to
www.avid.com.