home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Rockford Magazine
/
Rockford_Magazine_026_19xx_-_de_Disk_2_of_2_Side_A.d64
/
3dokarc2.50
< prev
next >
Wrap
Text File
|
2023-02-26
|
12KB
|
527 lines
=======================================
ARC 2.50 ANLEITUNG
=======================================
Du findest hier 3 Anleitungen zu ARC...
---------------------------------------
ARC 2.50 (ROF-Quelle:Shri Sadhu):
Mit ARC kann man mehrere Files oder
ganze Disketten-Seiten in ein File
packen. Das Ergebnis ist ein ARC-File,
dass 10% bis 50% kleiner ist, als alle
urspruenglichen Files zusammen. Das PRG
analysiert als erstes jedes File und
wendet dann die jeweils effektivsten
Packalgorithmen an. Wenn ein File nicht
mehr gepackt werden kann, dann wird es
ungepackt in die ARC-Datei geschrieben.
(storing).
--> Unter ARC werden Laufwerke nicht
mit Zahlen (8-11) angesprochen, sondern
wie unter MS-DOS mit Buchstaben!
Buchstabe Geraetenummer Drive
--------- ------------- -----
a...........8..............0
b 8 1
c...........9..............0
d 9 1
e...........10.............0
f 10 1
g...........11.............0
h 11 1
Allgemeine Kommandos
--------------------
LAUFWERK FESTLEGEN - drv:
In Zukunft beziehen sich alle
Floppy-Befehle auf das Laufwerk
"drv:". Beispiel: a: oder c:
DIRECTORY ZEIGEN - dir
Zeigt das Inhaltsverzeichnis vom
ausgewaehlten Laufwerk an.
- dir a:
Zeigt das Directory von der Disk
in Lfwk. a:
- dir b:???
Zeigt alle Files, von Laufwerk b:
die 3 Buchstaben haben.
- dir a*,b*
Zeigt alle Files, die mit "a" und
"b" beginnen, vom aktuellen Lfwk.
- dir a:t* c:t*
Zeigt alle Files von a: und c:, die
mit "t" beginnen.
- dir/w
Zeigt nur die Filenamen des aktuellen
Laufwerks.
- dir/w a:a* b:b*
Zeigt die Filenamen von a: und b:,
die mit "a" und "b" beginnen.
FILE LOESCHEN - del file
Loescht "file" auf dem aktuellem
Laufwerk.
- del a:w* b:w*
Loescht alle Files auf Lfwk. a: und
b:, die mit "w" beginnen.
FILES KOPIEREN - move a:file c:
Kopiert "file" von a: nach c:
- move a:* b:* c:*
Kopiert alle Files von a: und b:
nach c:
FILES UMBENENNEN - ren c:alt,neu
Benennt "alt", auf Lfwk. c:, in
"neu" um.
FILE ZEIGEN - type d:file
Zeigt alle Files an, die das ARC-
File "file" enthaelt.
DOS WEDGE - >
...zum Senden von Floppy-Befehlen wie
I,N oder S.
FILE-GROESSE - size a:file
Zaehlt und zeigt die Anzahl der Bytes
in "file".
LADE-ADRESSE - start d:file
Zeigt die Ladeadresse von "file" auf
Lfwk. d:
Archivier Kommandos:
--------------------
- arc/c c:buch a:*
richtet ein Archiv auf c: mit dem
Namen "Buch" ein, dass alle Files
von a: enthaelt.
- arc/c/s c:buch a:*=s
richtet ein Archiv auf c: ein, dass
alle SEQ-Files von a: UNGEPACKT
enthaelt.
- arc/c/gTEST f:buch c:d* a:e*
richtet ein Archiv auf f: ein, dass
alle Files von a: und c: enthaelt die
mit "d" und "e" beginnen. Das Code-
wort ist TEST.
- arc/x buch
Entpackt alle Files aus "buch" vom
aktuellen Laufwerk.
- arc/x c:buch seite1 a:*
Entpackt das File "seite1" aus dem
Archiv "buch" und schreibt es auf a:
- arc/a/s f:buch a:text
Haengt das File "text" auf a: an das
Archiv "buch" auf f: ohne es zu
packen an.
- arc/a a:buch c:*=r f:*=r
Haengt alle REL-Files von c: und f:
und das Archiv "buch" auf a: an.
- arc/l a:file
Listet alle Files aus dem Archiv
"file" auf a:
- arc/p c:buch seit1,seit2
Gibt die Files "seit1" und "seit2"
aus dem Archiv "buch" auf c: am
Bildschirm aus.
- arc/v a:buch
Vergleicht alle Files aus dem Archiv
"buch" auf Richtigkeit.
Text-Editor Kommandos:
----------------------
Mit dem Text-Editor kann man Text-
Files, Assembler Source-Codes und
Basic-Quelltexte editieren.
TEXT-MODUS - text
Schaltet den Text-Modus ein - Basic-
PRG. werden im Klartext angezeigt.
BASIC-MODUS - basic
Schaltet den Basic-Modus ein - Basic-
PRG. werden ausgeschrieben.
AUTOM. ZLN.-NR. - auto zahl
Schaltet die automatische Zeilen-
nummerierung ein.
RESET - cold
dasselbe wie der SYS-Reset
TEXT TAUSCHEN - change/from/to/
tauscht "string" from bis
"string" to.
TEXT LOESCHEN - delete zahl
Wie der LIST-Befehl - nur loeschen.
TEXT SUCHEN - find/string/
Zeigt die Zeilen in denen "string"
steht.
TEXT LADEN - get a:file
Laedt en Text "file" von Laufwerk a:
Es muss ein SEQ-File sein.
ARC VERLASSEN - kill
springt zurueck ins Basic 2.0 -
Neustart mit SYS 49152.
ZEILEN RE-NUMBER - renum von,anf,step
Zeilen-Neunummerierung von "von" mit
"anf" in der Schrittweite "step".
TEXT SPEICHERN - put c:file
Schreibt den Text auf Disk - Laufwerk
c:
SCROLL EIN - repeat
Schaltet den Programmscroll und
Tastenrepeat ein. off - aus
TEXT RETTEN - old
Holt ein geloeschtes File zurueck.
UMRECHNEN - hex zahl
Rechnet Hexadezimal in Dezimal um.
HILFE - help
Zeigt eine Liste aller Text-Editor-
Befehle
Speicheraufteilung:
-------------------
$033c-$03ff Kassettenpuffer - wird
benutzt
$0801-$4000 nicht benutzt
$4000-$7fff Arbeitsspeicher fuer
ARC und MOVE
$8000-$8fff in der 80-Spalten Ver-
sion (C128) benutzt
$9000-$97ff nicht benutzt
$9800-$9fff 80-Spalten Screen - bei
ARC 40 nicht benutzt
$a000-$bfff Programmspeicher
$c000-$cfff Programmspeicher
$d000-$ffff nicht benutzt
=======================================
=======================================
ARC 2.50 INFOS VON ALEX ZOP
- Info: .ARC 2.50 Archive koennen z.b.
auch von OMEGA-Q entpackt wer-
den.
- Tips:1) Floppys: a= ,8
c= ,9
s= source
d= destination
2) Bevor sie archivieren:
Date dd,mm,yyyy
3) Leistung: arcAmiga
420 auf 213 Bloecke
arc250 C64
420 auf 217 Bloecke
4) Packen (Neues Archiv):
arc/m s:archive.arc d:xxx
5) Packen (weitere):
arc/a s:archive.arc d:xxx
6) Liste (DIR) des Archiv:
arc/l s.archive.arc
7) Archive ueberpruefen:
arc/v s:archive.arc
8) Entpacken:
arc/e od. arc/x
9) TXT lesen (Monitor):
arc/p s:archive.arc
- Textfluss unterbrechen
(Pause) mit CONTROL, C=,
Shift, Scrollt absolut
schnell (zurueckscrollen
nicht moeglich). Diese
Funktion kann nicht abge-
brochen werden.
10) Funktioniert auch im C128
Modus.
11) Mit 1571 nicht immer
problemlos.
12) Move: Kopiert Files zwischen
zwei Floppys.
SIZE: RAM FREE
START: Zeigt Ladeadressen von
PRG im .arc Archive.
FETCHES: SEQ Files zum bear-
beiten hervorholen.
13) User mit min. zwei Laufwerken
koennen .ARC noch bequemer
benutzen, da .ARC von Floppy
A auf Floppy B entpackt/an-
gelegt werden koennen.
z.B.: Du willst ein .ARC
Archive oeffnen, welches sich
auf ner Disk im Laufwerk ,8
befindet. Auf eine leere Disk
in Floppy ,9 willst Du die
Files entpacken. Da ,9 in ARC
mit c: bezeichnet wird,
gibst Du zuallererst
c:
ein.
Nun musst Du ARC mitteilen,
das Archive xxx.arc in Floppy
,8 (a:) geoffnet werden muss.
Du gibst also folgendes ein:
arc/e a:xxxx.arc
Nun entpackt ARC die Daten
auf die Disk im Zweitlaufwerk
Das ganze funktioniert na-
tuerlich auch bei allen
anderen ARC Befehlen (z.B.
Packen).
=======================================
ARC 2.50 ORIGINAL DOC
If you're primarily interested in using
ARC to create and dissolve files on a
C-64 with a single disk drive, these
simplified (greatly simplified) docs
should be all you'll ever need. If you
later decide to utilize more of the
many features ARC has, get the full
documentation (its big!).
Date: ARC boots up with a default date
of 1 Jan, 1980. If you're only going to
dissolve an ARChive, there's no need to
change this. However, if you are going
to create an ARChive, you should type
in the current date because it will be
recorded on the ARCfile you create. Do
this by typing "date", a space, dd,mm,
yyyy. For example, today's date is the
2nd of January, 1988, so I would enter:
"date 02,01,1988" and hit RETURN.
Spaces: ARC uses a space to separate
filenames. A problem can occur if there
is a space WITHIN a filename. For
example, if you type "testfile 2.0",
ARC will search for (and not find)
"testfile" and then search for "2.0",
as if they were two separate files.
Fortunately, there's a simple solution
to this; just use a SHIFTED SPACE
between the "testfile" and the "2.0",
which will look like a normal space on
the screen, but will be distinguished
from a regular space separating two
filenames.
Dissolving an ARChive file:
"arc/x filename" (easy!)
Extracts all files from the ARCfile
called "filename" on drive a: (device
8/drive 0 like a 1541/1571 would be).
Creating ARChive files: (a little
tricky, but not really difficult)
"arc/c arcname filename filename etc."
"arc/c arcname *" (all files on disk)
"arc/c arcname b*" (all files starting
with the letter "b")
Example: Lets say you want to create
an ARCfile consisting of files that are
named "abcd", "file1", "file2", and
"docs" and that you want to call the
resulting ARCfile "test".
You could copy these 4 files onto a
blank disk first and use the wildcard
"*":
"arc/c test *"
Or, if you don't want to copy them over
to a blank disk, you can type out each
filename, separated by spaces:
"arc/c test abcd file1 file2 docs"
Either method creates an ARChive file
called "test.arc" on drive a. Note that
the ".arc" gets put on automatically.
You never have to type the ".arc" when
entering an ARCname.
Directory: "dir" (lists filenames in
the disk directory)
It is very handy to list the directory
immediately before using ARC/C or ARC/X
so that all the filenames you'll need
to type in will be listed on the screen.
Delete: "del filename" (erases a file
(or several files)
from the disk)
To scratch a file called "test", just
type "del test". If you have 4 files
named "test1", "test2", "test3", and
"test4" and you want to delete all 4,
just type "del test*" and every file
that begins with "test" will be deleted.
Rename: "ren oldname newname"
(to rename files)
To rename a file called "temp" to
"perm", just type "ren temp perm"
List: "arc/l arcfile" (lists out
the contents of
an ARC'ed file)
Colors: You can change the default
colors for the screen border, screen
background, and cursor by POKING the
standard Commodore color numbers (0-15)
to any color combination you prefer,
as follows:
LOAD"ARC250",8
POKE 20815,n (background)
POKE 20820,n (border)
POKE 20825,n (cursor)
SAVE"new name",8
If you want to create a SDA (self-
dissolving ARC) file, first create the
ARCfile as shown above, then use one of
the separate SDA utilities to change
the file from ".ARC" to ".SDA".
Utilities to convert from ".ARC" to
".SDA" are available on Q-Link and on
many local BBS's. My favorite is
"ARC-SDA V4.5", written by Mark Rhodes.
That's all most of us will ever need to
know to use ARC. If you want more, then
you'll need the official documentation.
For the latest ARC version, current
documentation, and ARC ownership
registration I suggest you send $20 to
the author of ARC, Chris Smeets at:
Chris Smeets/ARC64
Ampere Metal
80 Hale Road Unit 4
Brampton, Ontario
Cananda, L6W-3M1
416-458-0039 (BBS)
Many thanks to Chris Smeets for a
fantastic ARChive program!
=======================================