home *** CD-ROM | disk | FTP | other *** search
- (Smail3.1.29.1 #3) id m0tpyFB-0007qCn; Fri, 23 Feb 96 07:13 MST
- Path: sloth.swcp.com!tesuque.cs.sandia.gov!lynx.unm.edu!fg1.plk.af.mil!news.zynet.com!imci2!news.internetMCI.com!newsfeed.internetmci.com!howland.reston.ans.net!math.ohio-state.edu!magnus.acs.ohio-state.edu!lerc.nasa.gov!purdue!haven.umd.edu!cville-srv.wam.umd.edu!usenet
- From: drasin@wam.umd.edu (Joe Drasin)
- Newsgroups: comp.emulators.mac.executor
- Subject: Re: Executor won't start from MS-DOS
- Date: 22 Feb 1996 13:12:45 GMT
- Organization: University of Maryland College Park
- Lines: 23
- Message-ID: <4ghq4d$799@cville-srv.wam.umd.edu>
- References: <312BC17A.3676@starnetinc.com>
- NNTP-Posting-Host: dragon.dorm.umd.edu
- Mime-Version: 1.0
- Content-Type: Text/Plain; charset=US-ASCII
- X-Newsreader: WinVN 0.99.6
- To: executor@ardi.com
- X-MailNews-Gateway: From newsgroup comp.emulators.mac.executor
- Sender: owner-executor@ardi.com
- Precedence: bulk
-
- >I am running Executor 1.99q on an AMD DX4/100 with 16 MB RAM, 256K
- Cache, with a SIS
- >chipset on a VLB board running Windows 95 (build 950a). I also use a
- Hercules Graphite
- >VLB card with 1 MB RAM. I am unable to run Executor from MS-DOS alone,
- it will only
- >run under Windows 95. In my CONFIG.SYS file I am loading HIMEM.SYS,
- EMM386.EXE NOEMS,
- >FIles=30. When I start Executor, it buzzes my A drive, and then nothing
- happens. No
- >drive activity. I cannot restart my PC without a push on the Reset
- Button. Has anyone
- >had this same type of problem? Any suggestions? I would rather run it
-