home *** CD-ROM | disk | FTP | other *** search
Wrap
Received: from skypoint.com (mirage.skypoint.com [199.86.32.7]) by nacm.com (8.6.10/8.6.9) with SMTP id JAA26107 for <executor@nacm.com>; Fri, 4 Aug 1995 09:35:49 -0700 Received: by skypoint.com (Smail3.1.28.1 #6) id m0sePiK-0005DmC; Fri, 4 Aug 95 11:35 CDT Date: Fri, 4 Aug 1995 11:35:12 -0500 (CDT) From: Richard Steiner <rsteiner@skypoint.com> X-Sender: rsteiner@mirage To: executor@nacm.com Subject: Re: E/L Marathon Message-ID: <Pine.SV4.3.91.950804113119.12929B-100000@mirage> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-paper@nacm.com Precedence: bulk mat@ardi.com (Mat Hostetter) writes: > It sounds like Marathon bypasses Quickdraw, so you need to turn on > "refresh mode" to make sure that what they draw becomes visible. You > can do this either with: > > executor -refresh 10 > > or with the leftalt-shift-5 preferences panel. Lower refresh numbers > mean higher frame rates, but higher frame rates make Executor run more > slowly. Neither of these solutions seems to work under E/D v1.99o, FWIW. Setting the refresh rate via ALT-SHIFT-5 puts E/D into some kind of hold state (the mouse pointer flashes periodically, and no input is accepted either via keyboard or mouse). Is VESA 2.0 required to use refresh? Or are there other settings (like timer ON/OFF) that might affect it? ------------------------------------------------------------------------ -Rich Steiner >>>---> rsteiner@skypoint.com -> Bloomington, MN The Theorem Theorem: If If, Then Then. ------------------------------------------------------------------------