home *** CD-ROM | disk | FTP | other *** search
Wrap
Received: from ariel.tummy.com (ariel.tummy.com [199.67.50.14]) by nacm.com (8.6.10/8.6.9) with ESMTP id VAA07845 for <executor@nacm.com>; Fri, 28 Jul 1995 21:28:03 -0700 Received: (from efm@localhost) by ariel.tummy.com (8.6.12/8.6.12) id XAA04154 for executor@nacm.com; Fri, 28 Jul 1995 23:27:58 -0500 From: Evelyn Mitchell <efm@tummy.com> Message-Id: <199507290427.XAA04154@ariel.tummy.com> Subject: Executor/Linux and Mac Drives To: executor@nacm.com Date: Fri, 28 Jul 1995 23:27:57 -0500 (CST) X-Mailer: ELM [version 2.4 PL23] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Content-Length: 881 Sender: owner-paper@nacm.com Precedence: bulk Hi, Executor seems to be working fairly well. I've got 1.99n or o installed on Linux 1.3.9. Anyways, I'm trying to mount a Macintosh formatted scsi hard drive onto the Linux machine for use under executor. How do I do that? Other notes: Claris software runs great, though I've had problems opening files created on the mac and transfered to Linux. FrameMaker runs better than it did on the mac, though I haven't quite figured out what I'm going to do about printing. Quicken runs, but is unusable because the colours in the background of the registers all map to black. Executor doesn't cope with files across mount points at all. The most annoying problem is that when I'm running a network session to the Linux machine, the first couple of times I run executor I get a segmentation fault bomb. After that it runs fine. Thanks in advance, Evelyn Mitchell efm@tummy.com