home *** CD-ROM | disk | FTP | other *** search
Wrap
Received: from cyber1.servtech.com (cyber1.servtech.com [199.1.22.8]) by nacm.com (8.6.10/8.6.9) with SMTP id WAA12456 for <executor@nacm.com>; Thu, 29 Jun 1995 22:56:09 -0700 Message-Id: <199506300556.WAA12456@nacm.com> Report-Version: 2 >To: nacm.com!executor Date: Fri Jun 30 01:56:07 EST 1995 From: smtp@cyber1.servtech.com Not-Delivered-To: matrix.roc.servtech.com!dae51d@matrix.roc.servtech.com due to Message Transfer Agent Congestion (Cannot reach host. Delivery attempts will continue.) Content-Type: message Content-Length: 4300 Apparently-To: <executor@nacm.com> Sender: owner-paper@nacm.com Precedence: bulk Received: from nacm.com by cyber1.servtech.com; Wed, 28 Jun 95 23:01 EDT Received: (from majordom@localhost) by nacm.com (8.6.10/8.6.9) id SAA18536 for executor-digest-outgoing; Wed, 28 Jun 1995 18:47:29 -0700 Date: Wed, 28 Jun 1995 18:47:29 -0700 Message-Id: <199506290147.SAA18536@nacm.com> From: owner-executor-digest@nacm.com To: executor-digest@nacm.com Subject: executor-digest V1 #193 Reply-To: executor@nacm.com Errors-To: owner-executor-digest@nacm.com Content-Length: 3780 Content-Type: text Precedence: bulk executor-digest Wednesday, 28 June 1995 Volume 01 : Number 193 In this issue: Hypercard problems Playing Cyclone 1.2.1 under E/D 1.99m? ---------------------------------------------------------------------- From: "Michael H. Jackson" <mjackson@cln.etc.bc.ca> Date: Tue, 27 Jun 1995 23:09:20 -0700 Subject: Hypercard problems I'm trying to run a number of hypercard stacks, but can only get some to work. I am using E/Dos 199m under win95 Hypercard 2.0 Amongst other errors such as complete crashes, File system error -39 reading from the disk and General Protection Fault at eip=0005068d eax=ffffffff ebx=ffffffff ecx=00fff4c8 edx=00fff504 esi=001c223c edi=0032b458 ebp=001c2100 esp=001c20fc cs=00a7 ds=00af es=00af fs=00cf gs=0000 ss=00af Call frame traceback EIPs: 0x0005068d 0x00050d34 0x0006bcb8 0x0009c190 0x000be5dc 0x000be65c 0x000ccf18 0x000d46b0 Also got this trying to run HFSxfer after some other stuff: /ardi/executor/src/mmansubr.c:529 fatal error in RomLib_relalloc - ----------------------------------------------------------------- Mike Jackson, Science Teacher and Naturalist Temporary address: Box 2, Oyama, BC, VOH 1W0. Tel: 604-548-3522 Permanent address: 3118 Stevenson, Victoria, BC, Canada, V8X 1C5 http://www.islandnet.com/~mjackson/homepage.html - ----------------------------------------------------------------- ------------------------------ From: Rich <RSTEINER@DELPHI.COM> Date: Wed, 28 Jun 1995 12:31:08 -0400 (EDT) Subject: Playing Cyclone 1.2.1 under E/D 1.99m? Hullo... There are a couple nifty Mac games that I've recently started to play at work on my *real* Mac IIci during...um...well, mostly during lunch, and sometimes when waiting for long compiles to finish and such. Honest! :-) (*Gulp*) Anyway, I've also tried to run these games under Executor v1.99m, and I was pleasantly surprised (Yayayay!!) to find that two of them run! Those two are Glypha III (a neat Joust clone) and Shatterball (a 3-D breakout game). The third, however, doesn't seem to run at all. It's a clone of an old arcade favorite of mine (Star Castle) called Cyclone. Any chance of you Nice Folks at ARDI taking a looksie at Cyclone and trying to figger out what it's doing? Maybe for v1.99o (since I'm sure v1.99n is pretty much locked into place except for polishing and buffing)? Oh -- if any of you readers out there have stuff you think is Really Neat and want some of us other users (me <grin>) to know about it, why not wander to the web pages at http://vorlon.mit.edu/arditop.html and add the stuff you've found to work? I don't have anything to do with the pages -- but I've been checking them, and nobody's been adding anything! :-( FWIW, I've checked out Cyclone in E/D using 640x480x8bpp, 1024x768x8bpp, and and few lower graphics modes, and all I see is blackness... <frown> Must be doing something funky with the video -- I seem to remember some kind of video speed checking routine when I installed it on the IIci here. - -Rich (rsteinerskypoint.com is my preferred e-mail address) ------------------------------ End of executor-digest V1 #193 ****************************** To subscribe to executor-digest, send the command: subscribe executor-digest in the body of a message to "Majordomo@NACM.COM". If you want to subscribe something other than the account the mail is coming from, such as a local redistribution list, then append that address to the "subscribe" command; for example, to subscribe "local-executor-digest": subscribe executor-digest local-executor-digest@your.domain.net A non-digest (direct mail) version of this list is also available; to subscribe to that instead, replace all instances of "executor-digest" in the commands above with "executor".