home *** CD-ROM | disk | FTP | other *** search
- Evolution EVS-1 Group / Group Bank
- ----------------------------------------------
-
- Note: Group is the EVS-1 term for a
- Multi Setup.
-
- Group Bank - load all 20 Groups
- Group - load a single group
- - use the PCH# to select the group
-
-
- Before an updated Group or Group Bank
- can be sent to the EVS-1 Memory Protect
- must be turned off. This can be
- accomplished:
-
- 1) By using the buttons on the front panel
- of the EVS-1
- a) Press the Bank Util button until the
- LED below the button is illuminated.
- b) Press one of the >>> buttons until
- the LED above Memory Protect is
- illuminated.
- c) If the LED display reads ON press the
- up arrow key to the left or right of the
- display until it reads off.
-
- Data may now be sent to the EVS-1
-
- 2) Use the Utility Data Option supplied
- with Midi Quest to retrieve the Utility
- Data and set Memory Protect to OFF.
-
- Data may now be sent to the EVS-1
-
- * The Midi Channel must be set to the
- same as the Communication and Midi
- Channel in Midi Quest for successful
- communications.
-
- Note: Utility data can be updated on the
- EVS-1 even when Memory Protect is on.
-
-
-
-