The Datafile PD-CD 5

home *** CD-ROM | disk | FTP | other *** search

/ The Datafile PD-CD 5 / DATAFILE_PDCD5.iso / demos / plotdemo / !PlotDemo / HelpText < prev next >

Wrap

Text File | 1993-07-01 | 18.7 KB | 556 lines

1_X:This is the Cartesian formula plot dialogue box 1_18:Enter a formula for Y in terms of X 1_24:Enter the lowest value of X 1_6:Enter the highest value of X 1_2:\Automatic 1_8:\Manual 1_3:\Lock 1_5:Enter highest usable value of Y 1_10:Enter lowest value on Y axis 1_12:Enter highest value on Y axis 1_13:\Points 1_7:\Cancel 1_17:\Plot Cancel:Click SELECT to cancel operation Plot:Click SELECT to plot graph.|MClick ADJUST to plot graph and leave window open Points:Enter number of points to plot Automatic:Click SELECT to select automatic scaling Manual:Click SELECT to select manual scaling Lock:Click SELECT to toggle aspect ratio lock 2_X:This is the Parametric formula plot dialogue box 2_1:Enter a formula for X in terms of t 2_24:Enter a formula for Y in terms of t 2_3:Enter the lowest value of t 2_27:Enter the highest value of t 2_25:\Automatic 2_18:\Lock 2_17:\Manual 2_5:Enter highest usable value of X 2_23:Enter highest usable value of Y 2_6:Enter lowest value on X axis 2_12:Enter highest value on X axis 2_9:Enter lowest value on Y axis 2_13:Enter highest value on Y axis 2_16:\Points 2_20:\Cancel 2_21:\Plot 3_X:This is the Polar formula dialogue box 3_4:Enter a formula for R in terms of T 3_1:Enter the lowest value of T 3_5:Enter the highest value of T 3_8:\Automatic 3_13:Enter maximum usable value of R 3_10:\Manual 3_12:Enter largest value along radius 3_17:\Points 3_7:\Cancel 3_18:\Plot 10_X:This is the Lissajou Figure dialogue box 10_15:Enter a formula for R in terms of T 10_1:Enter the lowest value of T 10_5:Enter the highest value of T 10_6:Enter the ratio of P to T 10_21:Enter the constant phase difference between T and P 10_9:\Automatic 10_10:\Manual 10_17:Enter maximum usable value of R 10_12:Enter greatest value along radius 10_19:\Points 10_7:\Cancel 10_20:\Plot 20_X:This is the 3d Cartesian formula plot dialogue box 20_37:Enter a formula for X in terms of t 20_1:Enter a formula for Y in terms of t 20_31:Enter a formula for Z in terms of t 20_3:Enter lowest value of t 20_27:Enter highest value of t 20_30:\Automatic 20_21:\Lock 20_33:\Manual 20_6:Enter highest usable value of X 20_8:Enter highest usable value of Y 20_10:Enter highest usable value of Z 20_12:Enter lowest value on X axis 20_13:Enter highest value on X axis 20_16:Enter lowest value on Y axis 20_18:Enter highest value on Y axis 20_23:Enter lowest value on Z axis 20_24:Enter highest value on Z axis 20_35:\Points 20_20:\Cancel 20_36:\Plot 21_X:This is the Cylindrical Polar formula plot dialogue box 21_37:Enter a formula for T in terms of t 21_1:Enter a formula for R in terms of t 21_2:Enter a formula for Z in terms of t 21_27:Enter the lowest value of t 21_3:Enter the highest value of t 21_32:\Automatic 21_9:\Lock 21_23:Enter highest usable value of R 21_5:Enter highest usable value of Z 21_20:\Manual 21_13:Enter greatest value on radius 21_7:Enter lowest value on Z axis 21_15:Enter highest value on Z axis 21_11:\Points 21_12:\Cancel 21_18:\Plot 22_X:This is the Spherical Polar formula plot dialogue box. 22_20:Enter a formula for T in terms of t 22_0:Enter a formula for P in terms of t 22_1:Enter a formula for R in terms of t 22_3:Enter lowest value of t 22_23:Enter highest value of t 22_12:\Automatic 22_5:Enter highest usable value of R 22_17:\Manual 22_6:Enter greatest value along radius 22_18:\Points 22_7:\Cancel 22_19:\Plot 25_X:This is the Cartesian Surface formula plot dialogue box 25_1:Enter a formula for Z in terms of X and Y.|M(You can also use R and T for the radius and angle) 25_3:Enter the lowest value of X 25_9:Enter the highest value of X 25_13:Enter the number of steps along X axis 25_7:Enter the lowest value of Y 25_10:Enter the highest value of Y 25_14:Enter the number of steps along Y axis 25_16:\Automatic 25_17:\Lock 25_19:Enter highest usable value of Z 25_20:\Manual 25_33:Enter lowest value on X axis 25_21:Enter highest value on X axis 25_34:Enter lowest value on Y axis 25_22:Enter highest value on Y axis 25_24:Enter lowest value on Z axis 25_25:Enter highest value on Z axis 25_31:\Cancel 25_37:\Plot 4_X:Use this dialogue box to save a Draw File 4_0:Drag to a directory display to save file 4_1:Enter a file name here 4_2:Click to save file 5_X:Use this dialogue box to save a Plot File 5_0:\4_0 5_1:\4_1 5_2:\4_2 CR:Click to end each line with a Carriage Return LF:Click to end each line with a Line Feed CRLF:Click to end each line with a Carriage Return then Line Feed LFCR:Click to end each line with a Line Feed then Carriage Return 23_X:Use this dialogue box to save a Comma Separated Variables File 23_0:\4_0 23_1:\4_1 23_2:\4_2 23_5:\CR 23_6:\LF 23_7:\CRLF 23_8:\LFCR 23_9:Click to toggle whether axis labels are saved in file 23_3:Click to toggle whether rows and columns are swapped over 24_X:Use this dialogue box to save a Tab Separated Variables File 24_4:\CR 24_5:\LF 24_6:\CRLF 24_7:\LFCR 24_8:\23_3 24_9:\23_9 16_X:Use this dialogue box to apply a transformation to the data 16_3:Enter a transformation formula here. You can use t 16_5:\16_3 16_6:\16_3 16_9:Enter the lowest value of t 16_11:Enter the highest value of t 16_14:When this switch is on, number of steps given is used.|MWhen off, number of steps is number of rows of data 16_13:Enter number of steps to use 16_4:Click to apply transformation 12_X:This is the Graph Options Window 13_X:\12_X 13_13:Click SELECT to re-plot graph 13_5:Click SELECT to throw away new settings 13_6:Click SELECT to see stored settings 13_7:Click SELECT to see default settings 13_8:Click SELECT to keep new settings, but not re-plot graph 13_11:Click SELECT for the Altazimuth Controller tool 13_12:Click SELECT for the Pie Chart Slice tool 13_14:Click SELECT to save current settings as new defaults 13_15:Click SELECT to keep current settings for defaults for this session only 12_2:Click SELECT to toggle title display 12_5:Click SELECT to toggle X Axis label display 12_6:Click SELECT to toggle Y Axis label display 12_8:Click SELECT to toggle Z Axis label display 12_3:Enter title 12_4:Enter X Axis label 12_7:Enter Y Axis label 12_9:Enter Z Axis label 12_12:Click SELECT to toggle axis display 12_13:Click SELECT to toggle ticks display 12_17:Click SELECT to toggle fixed decimal places and free format 12_18:Enter number of decimal places to use 12_14:Click SELECT to toggle grid display 12_15:Click SELECT to toggle values along axes 12_16:Click SELECT to toggle solid or broken line for grid 12_20:Click SELECT to toggle coordinates display at points 12_21:Enter grid spacing 12_24:\12_21 12_27:\12_21 12_22:Enter values and ticks spacing 12_25:\12_22 12_28:\12_22 12_23:Enter logarithmic grid/values/ticks factor 12_26:\12_23 12_29:\12_23 12_39:Click SELECT to toggle key display 12_40:Enter key label 12_41:\12_40 12_42:\12_40 12_176:\12_40 12_178:\12_40 12_90:\Fonts 12_92:\Fonts 12_94:\Fonts 12_96:\Fonts 12_91:Enter size of text in points (1/72 inch) 12_93:\12_91 12_95:\12_91 12_97:\12_91 12_105:Enter maximum width of bars in OS units (1/180 inch) 12_106:Enter gap between bars as fraction of bar width 12_107:Enter gap between groups of bars as fraction of bar width 12_112:Click SELECT to toggle crosses at points display 12_118:Click to choose a cross style from the menu 12_119:\12_118 12_120:\12_118 12_121:\12_118 12_122:\12_118 12_123:\12_118 12_124:\12_118 12_125:\12_118 12_126:\12_118 12_127:\12_118 12_128:\12_118 12_129:\12_118 12_133:Enter size of crosses in OS units (1/180 inch) 12_140:Enter width of graph lines in OS units (1/180 inch).|M0 means 'as thin as possible on current display' 12_144:Click SELECT to toggle display of error bars 12_145:Enter formula for error in X (for histograms, error in Y1) 12_146:Enter formula for error in Y (for histograms, error in Y2) 12_147:Enter formula for error in Z (for histograms, error in Y3) 12_353:Enter formula for error in Y4 12_354:Enter formula for error in Y5 12_155:Enter number of colours to use in shading 12_156:Click SELECT to update colour scale display 12_153:This is the scale of colours used for shading 12_168:Click SELECT to choose flat shading (all tiles same colour) 12_169:Click SELECT to illuminate surface 12_170:Click SELECT to choose height shading (colour depends on height) 12_171:Click SELECT to choose wire frame display 12_172:Click SELECT to display all tile edges 12_173:Click SELECT to display only X-parallel edges 12_174:Click SELECT to display only Y-parallel edges 12_175:Click SELECT to display no edges 12_56:\Colours 12_57:\Colours 12_223:\Colours 12_227:\Colours 12_224:\Colours 12_225:\Colours 12_226:\Colours 12_228:\Colours 12_229:\Colours 12_230:\Colours 12_231:\Colours 12_233:\Colours 12_234:\Colours 12_235:\Colours 12_245:\Colours 12_247:\Colours 12_236:\Colours 12_237:\Colours 12_232:\Colours 12_239:\Colours 12_240:\Colours 12_241:\Colours 12_244:\Colours 12_249:\Colours 12_242:\Colours 12_243:\Colours 12_261:\Fonts 12_262:\Fonts 12_263:\Fonts 12_260:\Fonts 12_264:\Colours 12_265:\Colours 12_266:\Colours 12_267:\Colours 12_187:Click to toggle coloured area behind graph 12_268:\Colours 12_269:\Colours 12_188:Click to toggle shadowed axis box for 3d histograms and surfaces 12_195:Click to toggle coloured background behind graph 12_270:\Colours 12_271:\Colours 12_272:\Colours 12_273:\Colours 12_204:Click to toggle gradated/solid backdrop 12_205:Enter number of steps for gradated backdrop 12_219:Click to select direction of gradation 12_220:\12_219 12_222:Click to toggle one- or two-fold gradation.|MIf ON, shade from first to second colour and back again 12_208:\12_153 12_276:Click to toggle marking of points where graph crosses X axis 12_277:Click to toggle marking of points where graph crosses Y axis 12_278:Click to toggle printing of equation(s) on graph 12_279:Click to toggle marking of points of intersection of graphs.|M(This is only used for merged graphs) 12_281:Click to toggle marking of root(s), intercept(s) and intersection(s) with crosses.|MOtherwise, only coordinates are printed 12_284:\12_118 12_285:\12_118 12_286:\12_118 12_287:\12_118 12_288:Click to toggle filled/outlined crosses 12_282:\12_133 12_289:\12_288 12_290:\12_288 12_291:\12_288 12_292:\12_288 12_293:\12_288 12_280:Click to toggle printing of a border around the graph 12_221:Click to toggle cyclical logarithmic grid (when ON) or simple logarithmic grid (when OFF) 12_313:Click to toggle printing of coordinates of root(s) etc. at points or by side of graph 12_302:\Colours 12_303:\Colours 12_305:Click to toggle printing of title in a box 12_308:Click to toggle printing of equation in a box 12_314:Click to toggle printing of coordinates of root(s) etc. in a box.|M(Only if printed at side of graph) 12_307:Click to toggle printing of axis labels in a box 12_309:Click to toggle printing of key in a box 12_250:Click to toggle using data set (key) colours or 'Points and crosses' colour for crosses 12_315:Click to toggle between thin axes without arrows and thicker axes with arrows 12_322:Click to toggle drop shadow under graph paper.|M('Coloured graph paper' must be ON as well) 12_321:Click to toggle plain or drop shadow text background boxes 12_318:Click to toggle printing of vertical asymptotes 12_319:Click to toggle printing of horizontal asymptotes 12_320:Click to toggle printing of equation(s) of asymptote(s) 12_323:Click to toggle solid or broken line for asymptotes 12_324:Click to toggle plain or patterned graph paper.|M(You must drag a draw file onto the adjacent target) 12_325:Drag the draw file for the patterned graph paper onto this target.|MIt shows a preview of the patterning.|MClick MENU to delete graphic 12_326:Click to toggle whether the draw file is scaled to fit exactly or has its aspect ratio locked 12_327:Click to toggle detection of maxima and minima 12_335:Turn this switch on to use a draw file for the histogram bars of set 1 12_336:Turn this switch on to use a draw file for the histogram bars of set 2 12_337:Turn this swicth on to use a draw file for the histogram bars of set 3 12_338:Turn this switch on to use a draw file for the histogram bars of set 4 12_339:Turn this switch on to use a draw file for the histogram bars of set 5 12_340:Click to tile the draw file to fill the bar 12_341:Click to scale the draw file to fill the bar 12_342:\12_340 12_344:\12_340 12_346:\12_340 12_348:\12_340 12_343:\12_341 12_345:\12_341 12_347:\12_341 12_349:\12_341 12_330:Drag the draw file for the histogram bars onto this target.|MIt shows a preview.|MClick MENU to delete graphic 12_331:\12_330 12_332:\12_330 12_333:\12_330 12_334:\12_330 12_350:Enter the number of decimal places to be used (0-9).|MUse F for free-format 12_351:\12_350 12_352:\12_350 12_358:Enter the maximum number of columns that will be used in the key 12_359:Enter the angle above the X axis from which the graph is to be viewed (0-90°).|M(This affects 3d charts except oblique ribbon charts) 12_366:To make tiled graphics overlap, enter the percentage overlap here 12_371:\12_366 12_372:\12_366 12_373:\12_366 12_374:\12_366 12_380:Click SELECT to toggle plotting of construction lines 12_381:Click SELECT to toggle method of joining points.|MIf ON, points are joined by smooth curves 12_114:\12_118 12_115:\12_118 12_116:\12_118 12_117:\12_118 12_382:Click SELECT to toggle printing of key in reverse order 12_383:Click SELECT to toggle printing of sub-division ticks (only if Show ticks is ON) Colours:Click SELECT to edit this colour Fonts:Enter a font name.|MClick MENU for Font List menu 19_X:Use the Colour Selector tool to mix a colour 19_0:Click or drag SELECT to set the red level 19_1:Click or drag SELECT to set the green level 19_2:Click or drag SELECT to set the blue level 19_5:Click SELECT to pick this colour sample 19_6:\19_5 19_7:\19_5 19_8:\19_5 19_9:\19_5 19_10:\19_5 19_11:\19_5 19_12:\19_5 19_13:\19_5 19_14:\19_5 19_15:\19_5 19_16:\19_5 19_18:\19_5 19_19:\19_5 19_31:\19_5 19_32:\19_5 19_36:Click SELECT to store this information 19_37:Click SELECT to throw away this information.|MSTOREd information is not lost 19_35:Click SELECT to store this information, and use it all later 19_28:Enter level of red (0-100) 19_29:Enter level of green (0-100) 19_30:Enter level of blue (0-100) 26_X:Use the Slice tool to set the colour of individiual Pie Chart slices 26_3:Click SELECT to toggle whether slice is 'pulled out' of Pie Chart 26_36:Click SELECT for transparent 'colour' 17_X:This is the Re-scale dialogue box 17_1:Click SELECT to toggle manual axis scaling 17_3:\17_1 17_4:\17_1 17_9:Enter minimum value on axis 17_10:\17_9 17_11:\17_9 17_6:Enter maximum value on axis 17_7:\17_11 17_8:\17_11 17_0:Click SELECT to toggle Aspect Ratio lock, used after re-scaling 18_X:Use the Altazimuth Controller to rotate view of graph 18_26:Enter rotation about horizontal (altitude) 18_29:Enter rotation about vertical (azimuth) 18_0:Click or drag SELECT to set altitude 18_3:Click or drag SELECT to set azimuth 18_37:Enter the perspective setting (0-1).|M0=vanishing point at infinity.|M1=closest vanishing point, maximum perspective 18_19:Click SELECT to toggle display of X axis 18_23:Click SELECT to toggle display of Y axis 18_24:Click SELECT to toggle display of Z axis 18_33:Click SELECT to toggle display of cube 18_34:Click SELECT to toggle display of two planes 18_35:Click SELECT to toggle real-time redraw 14_X:You are about to lose some data from Plot! 14_1:Click SELECT to keep data 14_2:Click SELECT to discard data 14_3:Click SELECT to save data before closing window 6_X:Use this dialogue box to merge some graphs 6_1:Click SELECT to choose the base graph 6_2:\6_1 6_3:\6_1 6_4:\6_1 6_5:\6_1 6_6:\6_1 6_7:\6_1 6_8:\6_1 6_9:\6_1 6_13:Click SELECT to turn on additional graphs 6_14:\6_13 6_15:\6_13 6_16:\6_13 6_17:\6_13 6_18:\6_13 6_19:\6_13 6_20:\6_13 6_21:\6_13 6_41:Click SELECT to produce the merged graph 29_X:This is the Calculus window 29_2:This shows the last operation performed 29_1:This is the result of the last operation 29_9:Enter the value of X at which to differentiate 29_6:Click SELECT to differentiate Y with respect to X 29_17:Enter the lower limit 29_18:Enter the upper limit 29_19:Enter the number of steps to use 29_14:Click SELECT to integrate using the Rectangle Rule 29_15:Click SELECT to integrate using the Trapezium Rule 29_16:Click SELECT to integrate using Simpson's Rule 29_21:Click SELECT to perform all operations from stored data 29_22:Click SELECT to perform all operations from formulae 29_23:Click SELECT to close window 28_X:This is the Import Data dialogue box 28_0:This is the format of the input file 28_4:This is the format of the graph to import to 28_6:Click SELECT to choose the graph format 28_5:\28_6 28_7:Click SELECT to toggle swapping of rows and columns 28_26:Click SELECT to toggle importing of axis labels 28_11:Click SELECT to toggle import of this variable 28_13:\28_11 28_18:\28_11 28_23:\28_11 28_24:\28_11 28_10:Enter the column of the input file for this variable 28_9:\28_10 28_16:\28_10 28_17:\28_10 28_20:\28_10 28_31:Turn this switch ON to estimate missing values 28_33:Turn this switch ON to use the %%%%interval of SID files instead of importing data into column 1 27_X:Use this dialogue box to start a new Surface 27_1:Enter lowest value on X axis 27_3:Enter highest value on X axis 27_5:Enter number of steps on X axis 27_2:Enter lowest value on Y axis 27_4:Enter highest value on Y axis 27_6:Enter number of steps on Y axis 31_X:Use this dialogue box to turn raw histogram data into data for a frequency diagram 31_7:Enter the lowest value of the raw data to be used 31_8:Enter the highest value of the raw data to be used 31_9:Enter the width of each interval 31_10:Click SELECT to compile data to a histogram window 31_11:Click SELECT to compile data to a pie chart window 31_13:Click SELECT to process data 32_X:This is the toolbox 32_0:Click SELECT to zoom into the graph.|MClick ADJUST to zoom out of the graph 32_1:Click SELECT to draw lines 32_2:Click SELECT to draw arrows 32_3:Click SELECT to draw boxes 32_4:Click SELECT to draw boxes with drop shadows 32_5:Click SELECT to enter text mode 32_6:Click SELECT to enter Select Mode 32_7:Click SELECT to copy the selected objects 32_8:Click SELECT to re-plot the graph 33_X:Use this dialogue box to change the way Plot behaves 33_2:This switch selects DEGREES as the unit of angular measure 33_3:This switch selects RADIANS as the unit of angular measure 33_6:Click SELECT to toggle coordinate logging for Cartesian, Parametric, Polar and Lissajous graphs 33_9:Click SELECT to toggle whether or not interactive help will be provided in the next session.|M(This only has effect when Plot is next loaded) 33_10:Click SELECT to keep the old settings 33_11:Click SELECT to save the new settings.|MClick ADJUST to save, and keep the Preferences window open 33_13:Click SELECT to use the new settings.|MClick ADJUST to use them, and keep the Preferences window open 33_14:Click SELECT to toggle colour dithering to simulate more colours.|MThis feature is only available with RISC OS 3 33_16:Enter the default zoom factors for new graphs 33_18:\33_16 NoHelp:!