home *** CD-ROM | disk | FTP | other *** search
- SHOWSCSI.EXE v1.02
- ------------------
-
- This Windows utility scans the SCSI bus and displays an iconic view of each
- device you have connected to your Adaptec SCSI host adapter (It may work
- with other SCSI host adapters that conform to Adaptec's ASPI standard).
- You will need to have the appropriate ASPI manager loaded in your CONFIG.SYS
- for this utility to work properly (ie. ASPI4DOS.SYS for the AHA-1540/1542/
- 1640, ASPIEDOS.SYS for the AHA-1740/1742/1744, and ASPI2DOS.SYS for the
- AHA-1520/1522/1510/AIC-6260). Useful information such as device revision,
- support capabilities, whether the device is SCSI-1 or SCSI-2, etc. are also
- displayed. Supports color VGA monitors and above. Minimal support for
- lesser monitors.
-
- Due to a compiler bug, the previous revision of SHOWSCSI.EXE would sometimes
- report back an incorrect drive capacity. This has been fixed.
-
- WIN1520.EXE v1.00
- -----------------
-
- This Windows utility shows you how to properly set the jumpers for an Adaptec
- AHA-1520 or AHA-1522 SCSI Host Adapter. When a selection is changed, the
- jumper configuration will be modified so that the card image on the screen
- can be used as a map to configure your host adapter. Only PIO mode
- configurations are shown. Supports color VGA monitors and above. Minimal
- support for lesser monitors.
-
- To remove the initial pop-up help screen, run this Windows utility
- as follows:
-
- WIN1520 nohelp
-
- **************************************************************************
-
- THESE UTILITIES ARE FREELY DISTRIBUTABLE BUT MAY NOT BE SHIPPED WITH
- COMMERCIAL SOFTWARE. FEEDBACK CAN BE SENT VIA COMPUSERVE TO THE AUTHOR:
- MIKE BERHAN [70303,1111].
-
- **************************************************************************
-
-