home *** CD-ROM | disk | FTP | other *** search
-
- THE NO-CAN-SEE SCRAMBLER (C)
-
-
- THE HELP-ME DOCUMENT
-
-
-
- This information was prepared for those individuals who, for
- whatever the reason, got into serious difficulty while using
- The Scrambler. We, at Computer Specialties, certainly hope
- that these few simple instructions will help you through this
- time of stress.
-
- Unless you were just curious, you are reading this document
- because you have tried to Unscramble one of your files and it
- is still unreadable. Chances are, if this has occurred, you
- were using a Pass Word to Unscrable your file and it happened
- to be an incorrect Pass Word.
-
- If you are not the individual, who originally Scrambled this
- file, these instructions will not be of help to you because to
- correct this problem, you have to know the correct Pass Word.
- If this happens to be the case, you have certainly created a
- serious problem for the individual, who this file belongs to.
- If you have only tried to Unscramble this file one time, you
- are in luck. If this is the situation, please be kind enough
- to restore this individuals file back to where it was before
- you tampered with it. If you have tried two, or more times to
- Unscramble the file, then you need to inform the concerned in-
- dividual as to what has happened. It may be embarrassing, but
- you owe at least this much, to this person.
-
- NOTE: If you did not use a Pass Word while trying to Unscram-
- ble this file, just Unscramble it one more time (without
- using a Pass Word) to restore this file to its original
- state.
-
-
- THESE INSTRUCTIONS ARE FOR ANY INDIVIDUAL
- WHO ATTEMPTED TO UNSCRABLE A FILE ONE TIME AND FAILED
- BECAUSE THEY USED THE WRONG PASS WORD
-
- ─────────────────────────────────────────────────────────
-
- 1. After reading these instructions, return to the DOS Prompt.
- 2. Give this command: TYPE LAST-COM.UNS
- 3. The Path, File Name, and Pass Word that you used will be
- displayed on the screen. Write this down and double check
- that you didn't make any mistakes.
- 4. Restart The Scrambler - Give this command: SCRAMBLE
- 5. Select Unscramble - Option B of Main Menu
- 6. Enter the Path, File Name, and Pass Word that you wrote
- down from the screen display.
- 7. Unscramble this file - The file is now in its original state.
-
-
- If you have the correct Pass Word, you will now be able to Un-
- scramble this file..... just by doing so.